3-blade wind turbines

16 companies | 80 products

High availability
Currently, the Siemens fleet of 2.3 MW wind turbines sets the industry standard for availability. The SWT-2.3-101 will build on the reputation for reliability that the market has come to expect from a Siemens turbine.
Harvest more energy from sites with low and medium wind speeds
The...

Greater output from lower wind speeds
Since wind turbine technology was in its infancy, Siemens has been a major driver of innovation. And with its enhanced reliability and productivity in low to moderate wind speeds, the new SWT-2.3-108 is yet another example of the commitment to customers success.
Longer...

General
The SWT-3.0-101 / SWT-3.2-101 is designed to cope with the highest of wind speeds and the roughest turbulence. Extreme wind conditions place tremendous loads on a turbine. The SWT-3.0-101 / SWT-3.2-101 is built to deliver reliable performance under the worlds harshest operating conditions.
The SWT-3.0-101 / SWT-3.2-101 utilizes...

General
Offering the largest rotor in the Siemens 3-MW family, the SWT-3.0-113 / SWT-3.2-113 is designed to increase energy output at sites with moderate wind conditions.
Once again the competitive edge of a Siemens turbine is based on innovative blade design. The B55 quantum blade applies new airfoils and redesigned tip and root sections, resulting in maximum energy output...

General

When winds are strong, but the site conditions less complicated the SWT-3.0-108 / SWT-3.2-108 offers a superior combination of large rotor and robust design.

The new B53 quantum blade of the 108m rotor is the first full-scale application of Siemens innovative aeroelastic blade design, which allows a larger rotor diameter and higher energy output without increasing...

{{productDetail[88089]}}

Gamesa 5.0 MW platform demostrates that Gamesa has the knowledge, experience, and resources needed to develop wind turbines capable of extracting maximum power from the wind.

Gamesa 5.0 MW platform’s...

The track record built up coupled with deep knowledge of current market demands has enabled Gamesa to continue to add the finest technology developments to its 2.0-2.5 MW platform, bringing significant innovation in terms of design, product and performance.

The key characteristics of the Gamesa 2.0-2.5 MW platform are its robustness, stellar reliability and suitability for all...

Gamesa makes progress on its offshore strategy by developing its G128-5.0 MW Offshore and G132-5.0 MW Offshore wind turbine. Based on the proven technology validated in recent years in Gamesa 5.0 MW platform and the operating know-how and experience built up, the Gamesa Offshore wind turbines combine high reliability and optimal cost of...

{{productDetail[88576]}}

The ECO 100 range of wind turbines offers high yield and leading efficiency accross all wind classes.Optimized...

Thanks to its 150-metre diameter rotor (with blades stretching 73.50 metre), the turbine is more efficient since its yield is 15% better than existing...

{{productDetail[88574]}}

The V110-2.0 MW™ IEC IIIA is an extremely reliable turbine, which is documented through its strong availability and performance. This turbine allows you to increase productivity by opening up...

The V100-1.8/2.0 MW™ IEC S/IEC IIIA turbines allow you to increase productivity by opening up low- and medium-wind...

The V90-1.8/2.0 MW® IEC IIA/IIIA turbines build on proven technology over several generations ensuring great...

Built on the same proven technology as the V112-3.0 MW®, the V126-3.3 MW™ IEC IIIA is our best performer on low-wind...

{{productDetail[88087]}}

Rated power: 800 kW
Rotor diameter: 48 m
Hub height: 50 m / 55 m / 60 m / 76 m
Wind zone (DiBt): WZ III
Wind class (IEC): IEC/NVN IIA
Turbine concept: Gearless, variable speed, single blade adjustment
Rotor
Type: Upwind rotor with active...

Rated power: 800 kW
Rotor diameter: 52.9 m
Hub height: 60 m / 73 m
Wind zone (DiBt): WZ II exp
Wind class (IEC): IEC/NVN Class S, (vav = 7.5 m/s, vext = 57 m/s)
Turbine concept: Gearless, variable speed, single blade adjustment
Rotor
Type: ...

Rated power: 900 kW
Rotor diameter: 44 m
Hub height: 45 m / 55 m
Wind class (IEC): IEC/NVN IA
Turbine concept: Gearless, variable speed, single blade adjustment
Rotor
Type: Upwind rotor with active pitch control
Rotational...

Rated power: 2,300 kW
Rotor diameter: 71 m
Hub height: 57 m / 64 m / 74 m / 85 m / 98 m / 113 m
Wind zone (DiBt): WZ III
Wind class (IEC): IEC/NVN IA und IEC/NVN IIA
Turbine concept: Gearless, variable speed, single blade adjustment
Rotor
Type: ...

Rated power: 2,000 kW
Rotor diameter: 82 m
Hub height: 78 m / 85 m / 98 m / 108 m / 138 m
Wind zone (DiBt): WZ III
Wind class (IEC): IEC/NVN IIA
Turbine concept: Gearless, variable speed, single blade adjustment
Rotor
Type: Upwind rotor with...

{{productDetail[88093]}}

The Windspire V4.0 has 3 major components (turbine, generator, and Inverter / Converter) that offer a series of features which have been customized as a fully integrated system.

This solution enables the complete systems to be optimized for maximum efficiency and reliability. Some competitors may offer selected features; however, it is believed that there is no known competitor...

{{productDetail[62273]}}

For many areas across the UK including Orkney, Shetland, Cornwall and Devon - there is a grid connection standard, known as G83, which limits the amount of energy that can be exported to the grid....

Off-grid applications, which traditionally rely on diesel generators as the sole or main energy generation source, offer a huge opportunity for deployment of wind turbines and have great...

{{productDetail[69875]}}

The N131/3000 is specially designed for light-wind locations (IEC-3). With its 3.0 MW installed capacity the increase in rated output amounts to 25 percent. Despite the substantial increase in...

The N117/3000 is designed for medium wind speeds (IEC-2)...

The N100/3300 is designed for strong wind speeds (IEC-1) and has a 32 percent greater nominal output compared with its predecessor. Yet, despite this...

The N117/2400 has been specially developed for low-wind sites. Thanks to a rotor diameter of 117 meters and a rotor sweep of 10,715 square meters, the N117/2400 is one of the most efficient IEC 3 turbines in its class. In typical low-wind regions, it will achieve over 3,500 full-load hours, thus...

The Nordex N100/2500 kW is a 2.5 MW wind turbine specially configured for moderate and low wind...

{{productDetail[88550]}}

The AW-3000 wind turbine (3.0 MW capacity) extends the multi-megawatt sector and is based...

The AW-1500 wind turbine (1.5 MW capacity) ranks among the most reliable machines...

{{productDetail[88572]}}

Making profitable and efficient windenergy accessible
As the high wind speed sites across the world become saturated the focus has shifted to providing efficient wind turbine solutions that operate at a lower wind spectrum. Suzlon's...

S88-2.1 MW is designed for a medium wind speed regime. Its wind turbine concept is based on a robust design with pitch regulated blade operation, a 3-stage...

The S82-1.5 MW has a well-suited ratio between rotor diameter and generator for most...

The S66-1.25 MW has a well-suited ratio of rotor diameter to generator for most sites...

The S52-600 kW has a well-suited ratio between rotor diameter and generator for most sites...

{{productDetail[88562]}}

Design Data

Hub height
60 m
Rated power
2000...

Design Data

Hub height
61,5 / 65 / 80 m
Rated...

Design Data

Hub height
61.5 / 65 / 80 m
Rated...

Design Data

Hub height
65 / 80 m
Rated Power
1,500...

{{productDetail[88566]}}

Gearless and with permanent magnet technology instead of excitation power and gearbox losses. With an air-cooled generator and air-cooled VENSYS frequency converter for the most...

With a significant increase in performance and yet so compact. With a rotor diameter extended to 100, 109 and 112 meters for most high wind and low wind sites.

The VENSYS 2.5 MW platform is the solution for the multi-megawatt range....

The new VENSYS 3 MW platform is based on the proven technology of the successful 2.5 MW platform. With a rotor...

{{productDetail[88556]}}
{{productDetail[88564]}}

General
Rated power 2000 kW Certified, 2300 kW to be Certified
Rotor Diameter 82 m
IEC Class Ila
Turbine Concept Direct drive gearless, variable speed,...

General
Rated power 1500 kW
Rotor Diameter 93 m
IEC Class Ila
Turbine Concept Direct drive gearless,...

Durability
Durability starts with a quality product.
Lagerwey's newest generation of direct drive
turbines is ready for the future and is challen-
ging earlier concepts in many aspects.
Lagerwey's long experience and innovative
mind regarding direct drive technology has
resulted in an optimal next generation of multi
megawatt wind turbines. Reducing the number
of...

General
Rated power 1500 kW
Rotor Diameter 100 m
IEC Class Ilia
Turbine Concept Direct drive...

General
Rated power 2500 kW
Rotor Diameter 100 m
IEC Class Ilia
Turbine Concept Direct drive...

{{productDetail[88568]}}

Aeolus Power (Wind-Energy) Limited is proud to have been appointed as the first UK distributor, supplier and installer of the Endurance Wind Power E-3120 wind turbine. It is a reliable wind turbine which has state-of-the-art features for safety, efficiency...

n October 2012 an agreement was reached between Endurance Wind Power and medium wind company Norwin, allowing Endurance to manufacture the Norwin 225kW wind turbine. Endurance has branded the turbine the Endurance Wind Power X-29 and we are delighted...

This is an excellent wind turbine from Northern Power Systems. It was originally...

{{productDetail[69620]}}

High Energy Yield |
Suitable for medium wind speed areas
Integrated mechanical drive train to minimize energy loss
Key components such as gearbox, generator, and transformer made by HHI
| High Reliability |
Safety lock system
Back up battery protects blades in case of power fault
Blades...

| High Energy Yield |
Suitable for medium to low wind speed areas
Integrated mechanical drive train to minimize energy loss
Key components such as gearbox, generator, and transformer made by HHI
| High Reliability |
Flexible coupling for main component...

High energy yield
Efficient design with light weight
Corrosion-proof...

{{productDetail[69960]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With ArchiExpo you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation