|
|
|
|
|
|
Quality Weldmesh using wire diameters 2.50mm - 5.00mm for industrial applications
Finish Options
Wire diameters range from 2.50mm to 5.00mm. The following coatings are possible: Self Colour (uncoated mild steel wire with a copper washed finish), Galvanised (galvanised after manufacture), Pre-Galvanised (manufactured from pre galvanised wire), Stainless Steel and Plastic coated. Weldmesh Heavy is supplied in panels (see technical information for detail) and rolls (60ft and 120ft).
Industrial Protection
The use of Betafence Weldmesh Heavy in industrial environments is constantly increasing, particularly in the areas of safety, security, storage and for building and construction. Weldmesh is supplied from a standard range of panels and rolls (see technical information for detail). Whatever the use, guards for machining, partitioning, outdoor storage, balustrades, scaffolding or perimeter fencing there is a Betafence Weldmesh type to suit the need.
Specialist Applications
Betafence Weldmesh Heavy is easy to work with and is easily combined with other materials. This makes the mesh multi-functional and can be used in all types of construction. Weldmesh can be bolted, stapled or welded and used in conjunction with wood, angle iron, slotted or punched angle and steel tube.
100% Guaranteed Quality
Betafence Weldmesh Heavy not only provides a solution for countless problems but advanced engineering and technology allows Betafence to guarantee consistent top quality. Betafence Weldmesh benefits from superior welding technology, the horizontal and vertical wire are electrically welded at each intersection to form a virtually unbreakable mesh.
|
|
A range supplements according to your constraints
Kopp is able to propose to you a whole range of fences, equipped according to the risks incurred by the site to protect.
Among the possible devices, we can supplement the fence by the following devices:
Bavolets, supplemented by barbed wires intended to obstruct the climbing. Preferably, the bavolets will be directed towards outside if the authorizations necessary are allotted and that they do not encroach on the close property.
The doubles bavolets (2 branches laid out in "Y") are intended to accommodate concertinas.
The barbed wires, brambles, concertinas can form integral part of the fence in reinforcement, or laid out with the top or the foot of the wall.
Lighting is an essential element of the analysis of risk according to the desired level of safety. We can control it to any system of detection of presence
|
|
The Prestéco panel is a panel reduced compared to the Prestipli panel.
The wire used is wire 4 mm, but the mesh was étroitisée with the dimension of 100*50 mm in order to confer a robustness equivalent to Prestipli to him.
The width of the panel is of 2485 mm, and it adapts to all the Vermigli posts: Prestige1 posts, Trade wind, Elite or Classic out of aluminum, like with the posts steel Prestimax or 60*40.
|
|
"Prestipli Panel"
The Prestipli panel is the standard panel of the market of the fence in panel: realized in mesh 200x50 and wire 5 mm, it are simple and harmonious.
Rigidity is obtained thanks to the horizontal veins, whose form was especially studied.
|
|
Netting simple torsion strong wire offers single a flexibility ratio/resistance. He is recognized like the durable solution and effective for the entourage of the sensitive perimeters, the prevention against the stone falls or the shock protection more the violent ones.
The mesh can be of nominal size 20,25,30,45,50,60 or 80, according to wire used.
The diameter of the wire can be, in galvanized, 2.2 mm, 2.7 mm, 3.0 mm, 3.9 mm, and in plasticized,
plasticized by extrusion = 1.7/2.8 mm, 2.6/3.8 mm, in green
plasticized by fluidization = 2.0/2.5 mm, 2.5/3.0 mm, 3.0/3.5 mm, 3.5/4.0 mm, 4.0/4.5 mm, in green
|
|
Together panneaux+poteaux of high strength.
They are a unit any steel, whose elements, connected the ones to the others via screws and bolts stainless autocassante, are panels reinforced by flats, and the posts with high module of inertia.
The panels are carried out in mesh 150*50, that is to say more reduced than the standard mesh what ensures a better resistance, in wire of 6 mm, and are rigidified by flats which are added with the panel itself.
The link between posts and panels is made by also welded cronières, who ensure the unit a perfect solidarity.
|
|
|
It is most known of the posts of the Prestige range and the basic element of the modern fence of reference: the nobility of aluminum and the robustness of steel are combined to propose with the user requiring a top-of-the-range fence.
|
|
The Prestité fence, practical and general-purpose.
The most economic series of the fences lattice VERMIGLI. Accept indifferently panels PRESTIPLI and PRESTECO. Combine a very great reliability and a very great security.
|
|
The panel doubles wire Prestidif is one of most resistant panels of the Prestige range.
The horizontal wire are doubled around a vertical wire.
The standard product is the 8+6+8 (wire vertical 6 mm, horizontal wire 8 mm).
This panel is the product to be retained in all the cases where a reinforced security is necessary.
|
|
Truly innovative shapes and uncompromising safety: these are the credentials of the new DITEC Qik barrier.
Soft edges, rounded corners, high performance and suitability for any type of installation environment.
Newly designed and technically advanced, Qik is the ideal solution for a totally safe access control of medium to high transit environments such as hotels, banks, shopping malls, as well as blocks of flats, companies and camp sites, which always require access control of car parking areas, to ensure their use to authorised people only.
The new Qik barriers are available in grey and red or in stainless steel, the ideal solution for harsher environments such as areas near the sea.
The wide range of lengths and DITEC accessories available ensure that all installation requirements are met.
|
|
|
|
|
|
Automatic lifting barriers
FAAC automatic barriers are an excellent solution for control of vehicle accesses in private, industrial and commercial areas. A wide range of products satisfies the broadest requirements in terms of entrance width and transit frequency: from the access of a condo parking area to the access point of a motorway.
The core of FAAC barrier range consists of four models: 615 for medium transit frequency applications, 620 for intense traffic accesses, 640 for intense traffic management in large industrial accesses, and 642 that provides high resistance to any type of aggressive environments through its rugged stainless steel hood.
Other three versions of the 615 and 620 models complete the range: 615 R (Rapid), 620 R and 620SR (Super Rapid), ideal for applications requiring very short opening times (e.g. parking areas, motorways).
All FAAC barriers are based on hydraulic technology that ensures very high performances, reliability, and very long product life. Unlike electro-mechanical barriers, hydraulic barriers have fewer gears, and the wear is considerably reduced by the use of a fluid (oil) as a lubricant.
Since 1993, FAAC’s quality and reliability are recognized by Società Autostrade SpA, administrator of the Italian highway network, which has selected FAAC high performance automatic barriers for all its tollbooths.
|
|
The BL 229 raising barrier is a universal barrier : its high performance and great reliability enable it to be used in a wide range of applications : traffic management, parking lots, industrial sites... and even toll roads (for the "fast" version).
Its main features are :
Modularity
- Barrier designed for many applications and environments
- Numerous accessories offered, allowing to meet various installation constraints, and various requirements in terms of security
- Barrier equipped with control logic allowing operation perfectly adapted to every situation
- Change of configuration or operation possible, even after initial installation of the product
Performance
- Fast and quiet movements
- Assimilation of major flows of vehicles
|
|
Swivel skirted barriers are available in both torque motor and hydraulic models
FB Barrier (torque) up to 5500 metres
HB Barrier (hydraulic) up to 7500 metres
|
|
The BLG 76 raising barrier with fence is built on the robust architecture of the BL 52, and is equipped with a boom carrying a mesh fence.
It is an interesting alternative to a sliding gate, because in addition to closing an access hermetically, it makes it possible to control it, vehicle by vehicle, and in a more fluid way.
Its main features are :
- Reinforced security
- Closing access to pedestrians as well, even on a very wide road
- Robustness and dissuasion of the unit
- Strict and effective entry control
Assimilation of a major flow of vehicles
- System faster than a sliding gate
Compactness on the ground
- Small overall dimensions in comparison with a sliding gate
|
|
Private areas, commercial or industrial companies often require access control to their car parking sites to allow entrance to duly authorized people only.
Nowadays, although technology offers a variety of control systems, barriers remain the simplest and most convenient solution to control parking access.
DITEC offers a winning product: UPPER barriers.
UPPER barriers can easily and effectively meet your parking-access requirements.
They have a simple and functional design.
They are provided in their traditional RAL 2000 orange colour, specifically chosen for safety reasons or in stainless steel, to withstand the harshest weather conditions and saltiness, which is a common problem in coastal areas.
|
|
The FBS is a barrier with electromechanical motor reducer for l%u2019automatisation of carparks, d%u2019accès or of private zones - fast Transformation into version left or right opening.
It is planned for an intensive semi use.
Ensure a traffic of 60 operations/hour.
Enclosure: Cataphoresis treatment + varnish powders yellow polyester (Weight env 75 kg).
Smooth: out of aluminum punt varnishing with the powders polyester with a protector rubber. (Section 25 mm X 90 mm) length 3 or 4 Mr.
Engine: Electromechanical motor reducer with fast releasing by key to allow the manual movement of the stringer in the event of power cut.
Logic: Electronic wardrobe pre cable length with deceleration in closing and opening, operation: step by step or automatic.
|
|
|
|
|
|
Barriers
Betafence barriers are a part of the range of products to provide total access control in combination with our range of professional fencing systems.
Benefits
Complete assortment
Automatic operation for openings up to 10 m, usingthe same motorisation and electronic controls for the different types available. Manual barriers available for penings up to 7 m.
Reliability
Durable design with advanced electronic control and motorisation.
Standard: 230 Volts monophase, optional: 3 phase - 230/400 VAC
Access control
The electronic control can be programmed to suit every project or special requirements of the customer.
A wide range of options is available: induction loop detection, photo-cells, key switch, RF-remote control, timer clock, card reader, key pad, coin receiver, parlophone, videophone.
Quality
Stainless steel housing, with polyester powder coated finish. complete with integral cast aluminium mechanical platform.
Electronic control enclosure IP54.
Polygone form aluminium arm, white plastic coated with red reflexion strips.
Ideal for
Specially for industrial surroundings and situations where access control is required.
|
|
Manual barrier intended to control the passage of vehicles and pedestrians.
Extremely solid and practical
Easy installation (platinum)
Exist in several lengths (of 3M to 8 M) useful passage
Fixing on platinum or to seal (to be specified)
Construction:
- Integrated Counterweight.
- Smooth out of aluminum with reflecting bands.
- Principal Support and rest of hot galvanized steel stringer.
- Detent pawl in closed and opened position.
- Support of arrow bored for closing lock.
- System of locking in closed open position (lock with European cylinder) - Height except ground 1000 mm
- Weight 84 to 193 kg
- Principal Support 400 X 270 mm
- Support of stringer 100 X 200 mm
Option:
- Captive Key with the principal support: one cannot remove the key without closing the barrier.
- Lock fireman SP 11 mm available.
- Key fireman
- Gauge of sealing for model with platinum
|
|
|
|
|
|
TYPE "REINFORCES" SOLAR
Conceived to control the access to the carpark
TOTAL AUTONOMY
Thanks to its Solar collector it is reloaded without any intervention for its user, some is the sunning.
Steel base of 6 millimetres Cap resting on a reinforced framework
preserving crushings
Stainless mechanism provided d%u2019un completely tight clutch Electronic system All the components are treated by metallization and thermo lacquering (guaranteed anti-corrosive)
Plate protector of the solar cell strong thickness, translucent
The arch is equipped luminous d%u2019un conspicuous announcing 8 functions, with a permanent analysis of the system
Tight electronic boxes
A meter indicates the number of movements carried out
Anti-crashing system:
resisting àplus of 16 tons
In the event of shock in the direction of circulation, l%u2019arceau is preserved by 2 springs with gas
L%u2019ouverture of the cap is protected from vandalism by a double security and a polycarbonate pane reinforced strong thickness
Security
If l%u2019arceau meets an obstacle:
During the increase, it goes down again
During the descent, it s%u2019arrête
And on a new request of the remote control, it goes up or goes down again
Standards and guaranteed
Together of l%u2019electronic IP 67 seals
Conform to the European standards
IN 346 and 953
CERTIFIED by REPORT/RATIO APAVE
GUARANTEE: 1 year MANUFACTURER
Option: descent forced by key fireman created for the accesses to the hospitals
Installation:
Fixing on the ground by 4 ankles or chemical sealing
|
|
Protect carpark FLEXY
Flexible arches in the two directions
- Height 600 mm
- Galvanized or thermolacquered (green)
- Lock of automatic blocking partly high, protected from the ground
- Flexible Arches in the two directions
- Version lock: European, identical cylinder, without cylinder, lock fireman.
- Weight 12 kg
|
|
Protect carpark TUB 1000
Conceived to control the access to the carpark.
- Height 455mm
- Galvanized Ø 48 mm
- Execution on 3 shoes rounded
- Partly high Lock of blocking,
- Version lock: European, identical cylinder - Weight 11 kg
|
|
GREEN PALACIO design Serge Botello
Material: steel oxidized corten or metal painted.
Dimensions: (mm) 970 X 180
|
|
METIS design Charles-Pierre Lamy
Materials: Matt stainless steel AISI 316 L and steel corten oxidized.
Dimensions: (mm) 900 X 160 X 30
|
|
|
A modular piece, bollard or containment rail bicycle rack and even occasional seat, made of cast iron and extruded aluminium for marking the boundaries of urban areas, a solution for problems of demarcating the city.
|
|
For passages of up to 8m and 16m.
A Came patent which is widely applied in demarcating private and public parking for single or multiple spaces. High in technology content, it is uniquely designed and perfectly integrable even in particular architectural settings and historical town centers.
|
|
BARRIER TO CHAIN CABINET PILOMAT® CHAIN
PILOMAT® CHAIN is a sturdy barrier to chain cabinet in order to delimit steps carrai and wide areas of parking till 20 m.
They Electronic incorporated with motor double quantity to 24V centers that she allows of
to raise chains till 60 kg of weight.
She is equipped of impact sensor
in order to guarantee the maximum emergency of operation.
She advises herself to add the guide to earth for
control of the chain when lowland.
Possibility to connect a card of recharges and batteries tempone
|
|
HARRIER E. Barrier for Parking.
Robust and resistant with body of galvanized steel and lacado to the oven. Recommended for installation in parking with continuous use and great speed of maneuver. Round arm, allows the change of hand in a simple maneuver. It can equip arms from 2.5 to 8.0 ms
|
|
For passages of up to 2.5m and 4m.
The fast automatic barriers are the ideal solution when you need to control and select roads and parking areas in residential and collective settings. They are available with both 230V and 24V motors and also in the special inox steel (rust proof) cabinet version. Ideal for application near the sea or in high traffic areas.
|
|
For passages of up to 7.6m.
Gard8 features innovative design features and is the latest in the line of automatic road barriers. It is the ideal solution to control roads and parking areas in industrial and collective settings. It comes in both the 230V and 24V versions.
|
|
|
|
