|
|
|
The diversity and the quality of our multi-layer solutions steel thermo-acoustics allows a multitude of architectural combination while preserving the performances of heat insulation and acoustic with the claddings multi-skin.
|
|
A wide range of panel surfaces leaves much room for individual composition with ALPHATON® brick façades such as the ALPHATON® ribbed panel whose characteristic feature is its horizontal structure. The panel's ribbed structure camouflages the horizontal seams between panels.
Far from being merely a design element, the ALPHATON® ribbed panel is also an active acoustic façade. Sound waves are broken by the ribs on the panel's surface and are redirected into the insulation through openings in the panel. An absorption of DLalpha = 3 dB can thus be achieved.
|
|
Favemanc Acústica is an absorbent wall parameter, which is composed of large format Clinker clay plates with perforated frontal face. The panels are fixed to a wall or structure with an aluminium frame structure and fastened with special stainless steel clips.
The acoustic plate is aimed for areas with high noise levels like Casinos, Schools, Auditoriums, Concert Halls, Sport Pavilions etc. Its technical characteristics are remarkable, since they are an addition to those of a high quality extruded Clinker Clay with high levels of acoustic absorption. This calls for the application in areas of demanding criteria for acoustic insulation material.
|
|
The Phoniceram® is a single-skin cladding product with horizontal or vertical perforations, and fixed on horizontal rails. It is used for the acoustic correction of noisy areas.
It may be combined with Zephir® (cladding product). It is available in six colours.
|
|
Acoustic sound absorbing panels are used for sound damping in internal applications only.
They can be erected as cladding of sound-absorbing cabins, as partition walls and additional cladding on façades and roofs.
|
|
| ... products without information |
| |
The acoustic brick offers all its talent for the realization of the partition-walls of doubling or distribution.
An unequalled esthetics with an acoustic perforated face and a smooth face of facing.
|
|
The Acoustic Shingle is an absorbent cladding product represented by long-dimensioned double-skin bricks with perforations on one side. It is fixed on vertical profiles. It is used for the acoustic correction of noisy areas.
It may be combined with Maestral (cladding product). It is available in six colours.
|
|
The Phonbric® is a double-skin cladding product. fixed on horizontal rails. II is used for the acoustic correction of noisy areas.
It may be combined with Boréal (cladding product). It is available in six colours.
|
|
The Acoustic Shingle is an absorbent cladding product represented by long-dimensioned double-skin bricks with perforations on one side. It is fixed on vertical profiles. It is used for the acoustic correction of noisy areas.
It may be combined with Maestral (cladding product). It is available in six colours.
|
|
The Phonbric® is a double-skin cladding product. fixed on horizontal rails. II is used for the acoustic correction of noisy areas.
It may be combined with Boréal (cladding product). It is available in six colours.
|
|
|
|
|
|
The REPI SOUND panels are metallic panels with insulation made of mineral wool fit for the realisation of Roofs Coverings, Walls, Internal Division of industrial and civil building
The REPI SOUND panels are constituted of two trapezoidal or microgrooved metallic supports with interposed insulation of oriented fibre mineral wool which is arranged in fillets perpendicularly to the two metallic supports.
METAL SUPPORT:
The REPI SOUND panels are made of two trapezoidal, microgrooved or flat metallic supports obtained by cold-process profiling the sheet coils.
The materials which are used are:
- Galvanized Steel
- Prepainted Galvanized Steel
- Stainless Steel
- Natural Aluminium
- Prepainted Aluminium
- Copper
INSULATION:
The insulation is made of oriented fibre mineral wool which is arranged in fillets perpendicularly to the two metallic supports. The thickness of the insulation may vary from a minimum of 40 mm to a maximum of 300 mm with a density from 75 to 150 kg/cu.m.
PERFORMANCE AND TECHNICAL ASPECTS
The REPI SOUND panels belong to the category of fire-proof products and soundproofing and soundabsorbent products. The REPI SOUND panel obtains the soundabsorbent power thanks to its typical Perforated Sheet exposed to noise. Acoustic tests have attributed to the REPI SOUND panels values of RW equal to 32dB, 33dB, 35dB, which face the problems concerning noise reduction. In order to increase the soundproofing power, it is possible to produce a monolithic panel supplied with triple sheet, that is to say with a thin metallic sheet between two insulating layers.
|
|
|
|
|
|
The REPI SOUND panels are metallic panels with insulation made of mineral wool fit for the realisation of Roofs Coverings, Walls, Internal Division of industrial and civil building
The REPI SOUND panels are constituted of two trapezoidal or microgrooved metallic supports with interposed insulation of oriented fibre mineral wool which is arranged in fillets perpendicularly to the two metallic supports.
METAL SUPPORT:
The REPI SOUND panels are made of two trapezoidal, microgrooved or flat metallic supports obtained by cold-process profiling the sheet coils.
The materials which are used are:
- Galvanized Steel
- Prepainted Galvanized Steel
- Stainless Steel
- Natural Aluminium
- Prepainted Aluminium
- Copper
INSULATION:
The insulation is made of oriented fibre mineral wool which is arranged in fillets perpendicularly to the two metallic supports. The thickness of the insulation may vary from a minimum of 40 mm to a maximum of 300 mm with a density from 75 to 150 kg/cu.m.
PERFORMANCE AND TECHNICAL ASPECTS
The REPI SOUND panels belong to the category of fire-proof products and soundproofing and soundabsorbent products. The REPI SOUND panel obtains the soundabsorbent power thanks to its typical Perforated Sheet exposed to noise. Acoustic tests have attributed to the REPI SOUND panels values of RW equal to 32dB, 33dB, 35dB, which face the problems concerning noise reduction. In order to increase the soundproofing power, it is possible to produce a monolithic panel supplied with triple sheet, that is to say with a thin metallic sheet between two insulating layers.
|
|
|
|
