|
|
|
|
|
|
Insulation
Kalzip insulation products conserve energy through their use by reducing the requirement to heat or cool buildings, limiting CO2 emissions. They are also HCFC and HFC free and have a global warming potential (GWP) rating of less than five
The most common insulation used is a quilt type, non-hygroscopic material that will not absorb any moisture, but simply retain it on the surface of its fibres thus encouraging evaporation to take place.
The use of a compressed insulation, completely filling the roof void above the vapour control layer, together with the breathability of the Kalzip sheet seams, negates the need for a breather membrane material within the Kalzip roof system.
Kalzip's range of insulation products includes glass and rockfibre quilt, semi-rigid slab and high density slab. At the heart of the range are Kalzip Insulation Plus 35 and Plus 37, which are high performance mineral fibre quilts offering extremely efficient thermal performance.
To complete the range further, glass and rockfibre insulants are available offering a wide variety of thermal performance values together with the flexibility of use where additional acoustic performance is required.
|
|
|
Semi-rigid panel rolled out of naked acoustic performance, glass wool high, adapted to the system of partition-wall great height. Be integrated into the system of Technostar partition-walls.
|
|
Semi-rigid panel to unroll out of glass wool covered with a veil comfort with transverse marking all the 100 Misters is integrated into the systems Intégra Réno and Vario.
The products of range ISOCONFORT are particularly well adapted for an easy installation and rapid between rafters. They allow the maintenance of a board of air ventilated between insulation and the cover for the perenniality of this one. Thanks to marking, cutting is easy. Elasticity and rigidity guarantee a perfect adjustment with the frame.
|
|
NoiseReducer products are designed for use in commercial and residential wall and ceiling assemblies to effectively reduce transmission of airborne sound and provide thermal insulation.
NoiseReducer Sound Control Batts are designed for wood stud interior walls and floors to help you add “the sounds of silence” to any home, as well as helping you differentiate yourself from your competition. Quite simply, NoiseReducer Sound Control Batts provide a sound-absorber that fills the void between interior wood studs. This absorber effectively breaks the path of sound. In other words, NoiseReducer batts keep the peace in new homes and work environment... limiting sound levels without limiting normal activity.
|
|
DESCRIPTION
- Boards of resin bonded glass fibers in a range of densities.
- Unfaced boards for use where an exterior finish will be applied.
- Foil Scrim Kraft (FSK) faced boards provide a clean metallic surface finish.
- All Service Jacket (ASJ) faced boards provide a white surface finish.
USES
- Where rigidity properties of a board product are required.
- Adding sound absorption to interior spaces.
- For exposed or non-exposed applications where a Fire Hazard Classification of 25/50 is required.
|
|
Ideal product for false ceilings and insulated wall claddings.
The panel consist of a stiff sheet metal support, which produces an excellent finish on the exposed part, and a flexible "nonwoven glass fibre" support (see MONOLAMIERA). On the exposed part, this panel is made with the same profiles and colours as the ISOPAR panel.
Maximum length of ISOPAR MONOLAMIERA single sheet panels is 5 metres.
|
|
|
Semi-rigid panel rolled out of naked acoustic performance, glass wool high, adapted to the system of partition-wall great height. Be integrated into the system of Technostar partition-walls.
|
|
Semi-rigid panel to unroll out of glass wool covered with a veil comfort with transverse marking all the 100 Misters is integrated into the systems Intégra Réno and Vario.
The products of range ISOCONFORT are particularly well adapted for an easy installation and rapid between rafters. They allow the maintenance of a board of air ventilated between insulation and the cover for the perenniality of this one. Thanks to marking, cutting is easy. Elasticity and rigidity guarantee a perfect adjustment with the frame.
|
|
Sunglass is specialised in the production of curved glass for the sector of building and architecture, industry and decoration
Research, experimentation and high level technologies have enabled the company to achieve ambitious goals that demonstrate and highlight its great technical and productive capacity as well as the high quality and reliability of its products.
|
|
|
When accentuated sightlines are desired on the exterior of the building with minimal framing visible from the interior, Series 6000 is the product for your building. This system is "reversed" from the conventional curtain walls of today with the structural element of the wall to the exterior of the building with small trim caps to the interior. Gaskets are available with factory molded corners. Continuous horizontal gutters result in superior air and water performance. Glass is set from the interior of the building reducing field installation costs. The Series 6000 is available in a standard 3" wide x 6-3/4" deep offering but can be customized to the specific needs of any project.
|
|
-Aluminium visible on outside, identical verticals/horizontals, 52mm.
-Three basic cowls: flat, convex, ogival.
-5 mullions of 14 to 327 cm4 inertia.
-Glazing hold from 6 to 28mm with same gasket on frame work (grooves and spacer bars). This makes it possible to adapt the groove in function of the glazing and the usable K coefficient (4 possible grooves).
|
|
|
|
|
|
1、Unitized Curtain Wall System:
Project: 6 Mort Street, Australia
The unitized curtain wall system is usually applied on the buildings which have a uniform exterior wall design. It can control and ensure the overall quality of the product; ensure the accuracy of installation; shorten the construction period considerably; provides "flexible skin" which enables the curtain wall to withstand building movement and thermal movement; provides an effective water drainage system and a pressure-equalized system.
2、Stick Curtain Wall System:
Project: North Tower Smaralind, Iceland Europe
The stick wall system can be used on any type of structure or exterior wall. These systems tend to work best on highly intricate or articulated wall designs.
3、Hybrid Curtain Wall System:
Project: Highline 23 Tower, New York
The hybrid wall system is best for use on buildings where a compromise between a unitized wall system and a stick wall system is required due to design or construction issues. It tends to use the better qualities of each to allow smaller, more manageable units.
4、Window Wall System:
The window wall system design is typically utilized on buildings where the structure conflicts with the exterior wall zone forcing the windows to run intermittently between floor slabs.
The window wall design achieves a reasonable amount of performance against air and water infiltration and does tend to surpass the curtain wall in acoustic ability (basically between floors).
|
|
|
The 1204 KAWNEER system allows the creation of curtain claddings, semi curtains, panels, faces and frame-surrounding facets, outlining each glass pane or panel of a hollow joint.
|
|
The 1202 Kawneer system offers various depths of uprights and crosspieces to facilitate adaptation to all project constraints, from curtain cladding and semi-curtains, to plane panelled and faceted. The 1202 cladding has the advantage of no height limit.
Depending on requirements, the cladding can be equipped with French-style openings, fixed hinge windows, tilt/turn windows and windows with an Italian-style frame invisible from the outside.
|
|
The AA 210 is a quick installation modular curtain wall for vertical cladding.
The construction principle allows for significant reduction in the amount of time for installation on-site, in order to suit the pace of the main construction.
The modular cladding is assembled in the workshop using an industrial production method, which guarantees its waterproofing and acoustic performance once complete.
It can be combined with French doors, fire doors or concealed Italian openings.
|
|
MC Curtain Walling
Clean and narrow 52mm sight lines both horizontally and vertically
A single fully integrated suite to incorporate a flexibility of designs
Facades can be facetted to create more interesting shapes and sizes
MC trame is an innovative addition to the range, which emphasises the horizontal, or vertical lines by eliminationg the need for cover caps on the other.
These extrusions can be used to support silicone glazed roofs.
|
|
The image of curtain walling is most often associated with substantial office buildings. Curtain walling systems enable large facades to be quickly and simply constructed and still allow for considerable expanses of glazing. However curtain walling sections can also be used as the skeleton for a glass enclosure, with little or no impact on the external appearance.
When the glass is structurally bonded to the aluminium section, the impact to the design is minimal, with sight lines typically as small as 52mm. The depth of the curtain walling will depend on both the vertical and horizontal size of the structure, but the sight line will remain constant.
|
|
| ... products without information |
| |
|
|
