|
|
|
ECOi 2 Way is a high-performance multi system with excellent energy-saving features, designed for creating comfortable environment when either heating or cooling is required.
|
|
|
|
|
|
TRIAQUA ALL IN ONE COMBINED AIR SOURCE HEAT PUMP
3AQUA-11
Smart Combination of Air Conditioning Heating, Cooling and Clean Sanitary Water Heat Pump Heater.Two Water Tanks Built Inside. Seperate Water Cycle For Air Conditioning and Domestic Water.
4 Times Energy Saving as Normal Gas or Petrol Heater. 1/4 OF Normal Bill Help You to Win the Whole Unit Free In One Year.
Main Characters:
1. Can be connected with solar water heater system.
2. Fault self diagnosis and warning function.
3. From the functions, we have desigend the unit specially according to the requierment of the European countries for the propose of environment protection.
4. From the design, our Triaqua have two seperate parts: indoor unit and outdoor unit. Only the indoor unit has the water recirculation. The outdoor unit has no water recirculation. It avoids the most dangerous problem of water freezing.
5. Our system has two water tanks built inside. One for domestic hot water, second for air conditioning heating and cooling. It contain 3 circuits built inside. One is for refrigerant, the other two are for water.
The following Hydraulic components are built inside to simplify installation work.
(1.Domestic Hot Water pump (2.Air conditioning water pump for 11KW
(3.Expansion vessels. (4.Filling system.
(5.Water tanks. (6.Purging system.
(7.Safety valves. (8.Water filter.
(9.Manometers.
The above parts are all installed and preset in the factory. It can save 80% installation time and can save several thousand EURO labour cost.
6. Our parts are always choosend with the top brand in the world
|
|
|
|
|
|
Our air to water heat pump is a new generation heat pump prduct developed with the most advanced heating technologies. The heat pump utilizeds the energy from surrounding air and converts it to the hot water for house air conditioning heating cooling and domestic hot water supply. The whole range of this heat pump is strictly tested with our European partners to make sure the best quality for European market. Especially for super low temperature area. The working abient is -15 degree to 45 degree and keep supply of warm water from 35 degree to 60 degree.
We select the best well known components for our heat pump such as Copeland compressor, Siemens, Danfoss, Wilo. It provide the most reliability to our customers.
Striking characters distinguish from other products
1.High efficiency and energy saving
2.Environmental friendly refrigerant
3.Keep working in super low temperature
4.Using step fan motor to make the accurate control
5.Water flow protection, pressure prtection, temp protection keep the the system safety.
|
|
|
|
|
|
Aqualis Caleo
Air-source heat pump for heating of individual homes and small businesses. As it operates in the high temperature ranges (+65°C for an outdoor temperature as low as -12°C), it can be connected to emitters of all types, terminal units (such as fan coil units and water cassettes) or radiators. May be installed in new or renovated housing and buildings to replace or be used in conjunction with a gas or oil-fired boiler. Provides complete autonomy and offers comfort and real energy savings when combined with a domestic hot-water tank and a buffer tank. Designed as standard for outdoor installation without any special weather protection.
Three models available
Heating capacity: 13 to 19 kW
- Complete packaged unit housed in a corrosion-resistant recyclable plastic casing,
- EVI (enhanced vapour injection) scroll compressor,
- Water-cooled brazed-plate heat exchanger,
- Variable-speed propeller fan,
- Inrush current limiter as standard on single-phase model, as required by French standard NF C 15 100,
- Hydraulic module with accelerator pump,
- Microprocessor-based control unit with MICROCONNECT two-wire remote control and self-regulating functions,
- R-407C refrigerant,
- Domestic hot-water tank optional.
|
|
Medium capacity air-to-water heat pump for "high temperature" heating only. Serves as a boiler backup in large homes and multi-residential buildings as well as businesses, hotels and healthcare facilities.
Particularly suited to renovations, the unit is designed to be connected to an optional mixing tank with multiple connections that supplies water to high-temperature radiators.
This packaged unit is designed to be installed outdoors in urban environments. No special precautions are required to protect it from adverse weather other than frost (in areas where frost is a possibility).
Available in four sizes:
TDC 80Z to 150Z: High temperature HEATING only; hydraulic system without buffer tank
Heating capacity: 25 to 48 kW
Outdoor use (-20°C to +45°C)
|
|
|
|
|
|
Duolis Inverter is a split system air-to-water heating-only heat pump with DC Inverter technology. It is designed to be used alone (new homes) or as a boiler backup (renovated homes) in single-family homes. It produces hot water as high as 60°C at outdoor temperatures as low as -10°C for use in radiant floor heating systems, radiators or fan coil units.
Duolis Inverter uses DC Inverter technology combined with our efficient µConnect control system to deliver consistent comfort levels for all occupants.
When installed with a SANI 300L or PACSOL unit, Duolis Inverter can satisfy a home's entire domestic hot water needs and reduce its electricity bills by more than 70%.
Duolis Inverter offers even more advantages!
CIAT has thought of everything: Duolis Inverter features the most widely known accessories to reduce installation times and take up to 30% less space!
Duolis Inverter comes with the following accessories:
Screen filter
80 l mixing tank
4 kW electric auxiliary unit
8 l expansion vessel
Noise insulation on compressor
Soft start
Room thermostat
Crankcase heater
Variable capacity model
Variable heating capacity (5.3 to 12 kW)
|
|
|
|
|
|
Aqualis 2
Air-source reversible heat pump for heating and cooling of individual homes and small businesses. May be connected to emitters that radiate gentle heat, such as underfloor heating and cooling systems, terminal units (such as fan coil units and water cassettes) or low-temperature radiators. May be installed in new or renovated housing and buildings to replace or be used in conjuction with a gas or oil-fired boiler. Designed as standard for outdoor installation without any special weather protection.
Eight models available
Heating capacity: 6 to 19 kW
Cooling capacity: 5 to 18 kW
Use:
Air-cooled chiller for cooling of individual homes and small businesses. May be connected to emitters such as underfloor heating and cooling systems or terminal units (such as fan coil units and water cassettes). Designed as standard for outdoor installation without any special weather protection.
- Complete packaged unit housed in a corrosion-resistant recyclable plastic casing,
- Scroll compressor,
- Water-cooled brazed-plate heat exchanger,
- Low-speed propeller fan,
- Hydraulic module with accelerator pump and expansion vessel,
- Microprocessor-based control unit with MICROCONNECT two-wire remote control and self-regulating functions,
- R-410A refrigerant.
|
|
SANYO's policy of product development continues with the expansion of the ECOi Mini, the 2 pipe heat pump small VRF system specifically designed for the European market.
Offering between 11kW and 16kW cooling capacity in 3 sizes and up to 10 indoor units connected, the ECOi Mini sets new standards of performance and flexibility. Utilising R410A and DC inverter technology, SANYO offers VRF to a new and growing market.
Forming a new key part of the SANYO VRF line up, the ECOi Mini is compatible with the same indoor units and controls as the rest of the electric and gas-powered range.
|
|
Reversible medium capacity air-to-water INVERTER heat pump for heating and cooling in individual or collective housing, tertiary, hotel or healthcare sectors.
May be connected to emitters such as underfloor heating and cooling systems, terminal units (such as fan coil units and water cassettes), air handling units or low-temperature radiators.
Designed as standard for outdoor installation in an urban environment without any special weather protection.
2 models available
- IVDC: Reversible heating or cooling with hydraulic system, without tank
Heating capacity from 41 to 53 kW
Cooling capacity from 36 to 47 kW
|
|
Medium-capacity air-cooled chiller for heating and cooling of residential buildings, businesses, industrial facilities and healthcare facilities. May be connected to emitters such as underfloor heating and cooling systems, terminal units (such as fan coil units and water cassettes) or air handling units. Designed as standard for outdoor installation without any special weather protection.
20 models available
- LD: Without hydraulic system
- LDC: With hydraulic system, without tank
- LDH: With complete hydraulic system and tank
Cooling capacity: 20 to 300 kW
Heating capacity: 20 to 285 kW
|
|
Air/water reversible single unit heat pump with DC inverter technology for individual homes or small businesses, Aqualis Inverter is designed to be installed in new housing or as a boiler backup for renovation projects. With a water outlet temperature up to +60°C, this heat pump meets the needs of all emitters (underfloor heating and cooling system, cassette or fan coil unit type terminal units, radiators, etc).
Thanks to the combination of DC inverter technology and our powerful µConnect control, Aqualis Inverter offers regular comfort adapted to all needs.
Used in conjunction with a SANI 300L or PACSOL, this heat pump ensures the complete production of domestic hot water with 70% savings compared with an electrical immersion heater. And for limitless comfort, opt for the between season swimming pool heating option!
2 variable power models
Heating capacity from 5 to 12kW and from 5 to 14kW
Cooling capacity from 4 to 11kW and from 4 to 13kW
|
|
Our range of heat pump IS OCTOPUS constitutes a complete solution which settles simply and which can be brought into service quickly. With range IS, it is not necessary to dig or drill in the ground.
THE "ICE STICK" EFFECTIVE AND ECOLOGICAL HEATING
This pump produces energy intended for heating by the means of aluminum profiles which condense the vapor of the water air, which is transformed then into white frost.
This heat pump makes it possible to heat your house, your second home or other buildings in a more economic and profitable way that with sources of energies such as fuel, gas or electricity.
Thanks to the heat exchanger, heat is forwarded to the hydraulic system (radiators low temperature or heating floor) in the house. Range IS can be adapted a system of heating existing (fuel, pellets, electricity....)
Our site in www.octopus-energie.com France
|
|
Range GIORPAC R and GIORPAC High Temperature, makes it possible to cover powers of 8 with 42kW in order to propose temperatures of water exit of 35° with 65°C. Heat pumps GIORPAC R AND GIORPAC R HT thus adapt as well to the systems of heating per heating floor as to the radiators low or high temperature, for new buildings or in rehabilitation. The range is adapted some are the climatic conditions and the area. The limiting temperature of operation can go until -20°C.
Produced advantages: a raised COP, a low sound level, a robust and reliable system calling upon Scroll technology, a powerful regulation for a comfort and economies optimum. Single-phase current available until 21kW
Associated with a Solar Boiler Giordano, it cover the totality of the thermal needs for an hearth, hot water and heating, and allow up to 80% of energy saving.
|
|
Air/Water: 5.4 - 20 kW
The Air/Water version of the Vitocal 350 achieves outputs of up to 20kW, even when the outside temperature is below zero
This model is perfectly suited to new build and to the modernisation of heating systems with radiators in existing buildings.
A particular benefit of this heat pump is that it exploits the energy source very easily. Collectors do not need to be buried and bore holes do not need to be drilled. It can be installed indoors or out and draws energy from the ambient air without the need for extensive installation work. Even when the outside temperature is below zero, it can achieve flow temperatures of 65°C
|
|
|
|
|
|
Weishaupt air/water heat pumps use free, everyday air as a an energy source and are highly efficient and powerful. Weishaupt air/water heat pumps are available for heating capacities of 6.6 to 22.3 kW.
Outstanding energy yield: The air/water heat pump works efficiently even with an outside temperature of -25° Celsius. Every Weishaupt heat pump is equipped with a high capacity heat exchanger.
Install anywhere: If there is not enough space indoors, the air/water heat pump can be installed outside. Its quiet operation means it can be installed as close as 5m from the next building.
Extremely quiet: Triple anti-vibration mounts, the fully sound insulated internal housing, the specially formed ventilators and the high capacity scroll compressors without mechanically actuated valves all ensure extremely quiet operation.
Also for cooling: By reversing the operating principle the Weishaupt air/water heat pump can also, with the appropriate accessories, be used for cooling buildings.
Longevity: Specially chosen materials, polished technology and robust construction all ensure reliability for years to come.
Forward looking investment: Modern technology enables high efficiencies and therefore lower operating costs. The availability of air as an energy source is unlimited.
|
|
Air accumulates heat energy throughout the year as a result of solar radiation, water and wind.
Therefore, this natural element represents an inexhaustible, clean and - most importantly - a
free source of energy, which can now be exploited thanks to thermodynamic heating, also
known as aerothermic heating.
The Airwell RCH-V range of air-to-water heat pumps with boiler back-up enables this natural
form of heat energy to be transferred into the residential environment: energy saving, comfort
and respect for the environment are the primary advantages of this technology.
|
|
- User friendly control and monitoring system
- Low noise level
- Easy installation
- Intelligent defrosting
- Anti corrosion coated condenser fins
- Heat recovery for exhaust air as option
|
|
|
|
|
|
Water chiller
WSAN-XSC: heat pump
WSAT-XSC: cooling only
Air cooled
Outdoor installation
Capacity from 163 to 493 kW
The R-410A SPINchiller series presents a new concept of chiller offering:
-EFFICIENCY that increases as the heating load decreases, while guaranteeing maximum requested load when necessary. SPINchiller always ensures maximum comfort with very high efficiency and consequently considerable energy savings;
-a modular approach. Several basic units may be connected together to form a single structure according to the required capacity. This allows high production standardisation and therefore utmost operating RELIABILITY;
-simple unit-system combination, since these units are SELF-ADAPTING to the characteristics of the actual system, thereby avoiding delicate, timeconsuming calibrations. Easy connection to the service system plus a simple control system and easy maintenance drastically reduce work requiring specialised personnel with consequent reduction in installation costs;
-extended operating limits to keep the system running, even under exceptional start-up and load conditions;
-customisation of the unit, also for special requirements both in the civil and technological air-conditioning sphere, thanks to the many available optional accessories. The ECOBreeze and HydroPack accessories in particular enhance the qualities of flexibility and energy efficiency. The latter, for example, consistent with the concept of modularity, has several pumps in parallel with the possibility of reserve pump, to monitor the system load variations better and to regulate the water flow in the critical system starting (or restarting) stages so that outside servicing is avoided.
|
|
|
|
|
|
Water chiller
WSAN-XEE: heat pump
WSAT-XEE: cooling only
Air cooled
Outdoor installation
Capacity from 24,3 to 72,2 kW
Liquid chillers and heat pumps of the ELFOEnergy WSAT-XEE and WSAN-XEE series are units designed for outdoor installation and best energy efficiency in relation to their reduced size.The ELFOEnergy series has been the turning point in the evolution of chillers.Every unit has been conceived and made by applying state-of-the-art technology,emphasising the qualities of EFFICIENCY, SELF-ADAPTATION and EASY INSTALLATION that distinguish this product Thanks to its constructional and electronic peculiarities, ELFOEnergy permits:
-high energy efficiency, in particular during partial-load operation, thanks to the use of two compressors with different capacities that work on a single refrigerant circuit;
-Eurovent energy efficiency classification class "A" in heating operation,also in full load condition;
-adaptability of operating parameters to the load conditions of the connected system, thereby optimising consumption, efficiency and working life of the parts;
-easy, quick installation thanks to the standard hydronic group and the factory test carried out prior to dispatch;
-installation of hydronic group with non-standard working head pumps or with double pump.
|
|
The Daikin Altherma total heating and cooling system is based on heat pump technology and represents a flexible and cost effective alternative to a fossil fuel boiler, with a cooling and sanitary warm water option.
The inherent energy efficiency characteristics of Altherma makes it an ideal solution to reduce energy consumption and CO2 emissions.
|
|
12 sizes from 40 to 222kW of Heating Capacity
Easy installation : Aquasnap includes an integrated hydronic module and a standard disconnect switch
Exceptional quiet operation: all units have scroll compressors and low noise shrouded Flying Bird II fans.
Chlorine free R407c green refrigerant
User friendly Prodialog Plus control with direct display machine main parameters : temperatures, pressures.....
Easy integration into any building thanks to reduced footprint and low profile
Standard Protection Grills
|
|
9 sizes from 19kW to 79kW
Chlorine free R407c green refrigerant
Scroll compressor design - Single circuit
Integrated Hydronic ModuleIntegrated Hydronic Module
High Static Axial Fans for Ducted Applications - 100 to 150 Pa
Direct Drive Axial Fan : no belt, no air flow adjustment at start-up
User friendly Prodialog Plus control with direct display machine main parameters : temperatures, pressures and CCN Clock board functionalities as standard*
|
|
To replace your boiler gas or fuel, divide your energy invoice by four. Compatible with the circuits standard radiators with a temperature d%u2019eau being able to reach 65° C.
- Reversible to offer airconditioning
- D%u2019eau medical Production hot in continuous flow
- Connection on exchanger for heating of pool and/or jacuzzi
Rare fact on the market of the ENR:
Our COP include the incidence of de-icing, and are announced of -15°C with +25°C.
These stations of eco heating are intended for the industrial sector but also for the infrastructures for which the requirements out of domestic hot water are important: Hotels, restaurants, centers of balneotherapy, hydrotherapy, thalasso, centers sporting, etc
It is also appropriate for the dwellings for which the energy needs are important (Lodgings, house of hosts, or private habitat comprising a pool).
|
|
To replace your boiler, divide your energy invoice by four.
- Compatible with the circuits standard radiators with a water temperature being able to reach 65° C.
- Reversible to offer airconditioning
- Compatible with the medical production of warm water in great quantity.
- Coupling on plate heat exchanger for the heating of pool/jacuzzi.
EXAMPLE: TRI 30KW 400 VOLTS 50HZ Curve of 0,6 for heating floor
COP with -15°c with INCIDENCES OF DE-ICING: 2,46
COP with +14°c with INCIDENCES OF DE-ICING: 5,86
Stations of eco heating of 20kw with 100kw for habitat, writing desks, hotels, multifamily apartment, industrial building.
|
|
|
|
|
|
To replace your boiler, divide your energy invoice by four. Compatible with the circuits standard radiators with a temperature d%u2019eau being able to reach 65° C.
Reversible to offer airconditioning, compatible with the medical production d%u2019eau hot and the heating of pool.
D%u2019énergie transfer, or how to air-condition your habitat, to recover the calories and to restore them with your domestic hot water or your pool. So that our children do not pay our comfort. Not to more produce CO2, of Nox or other pollutants. To decrease our energy consumption l%u2019environnement in a spectacular way while respecting.
There exists a innovating system which recovers its energy since l%u2019air external to heat and air-condition your habitat.
eco heating: comfort, wellbeing, ecology.
Cast solid unit placed at l%u2019exterior, simple to connect, it is equipped d%u2019un reversible hydraulic system for heating and the d%u2019énergie transfer.
Machine consuming of l%u2019énergie electric having for main feature to restore on average over a qu%u2019elle year between 3 and 4 times more d%u2019énergie calorific does not consume d%u2019énergie electric.
|
|
|
|
|
|
A technical solution supplements, simple and effective with TeamAO, the new Air/water CAP, which takes into account the reality of an installation of heating in floor heating or radiators.
With TeamAO, Frisquet proposes a supply complete, simple to implement and not requiring any intervention on the refrigerant.
The pack is composed of a MODULE EXTERNAL with Inverter technology, with exchanger and refrigerant filled with origin and pre proportioned to 2 kg and of an INTERIOR MODULE gathering all the elements (exchanger, bottle of mixture, regulation external,...) he allowing to control the installation and to maintain a COP high all the year, whatever the conditions of step. A glycolé primary education circuit (fluid antifreeze included in the supply) connects these 2 modules to ensure heat exchange in closed loop, therefore in an environment had a perfect command of whatever the installation of heating.
TeamAO, it is also a guaranteed comfort and energy performances optimized thanks to its modulation of power from 30% to 100% and its evaluation in real-time of the COP. Its interior module designed to be coupled to a boiler fuel or gas, or to integrate an electric resistance, allows TeamAO, to rock automatically with the most sparing energy: CAP or raises, or to combine both.
· Powers 8 kw or 11 kw
· High normative COP: 4,1 or 3,7 according to powers
· Single-phase current or three-phase current
· Connection 1.2 or 3 circuits
TeamAO, a complete unit including/understanding:
· 1 external module
· 1 interior module
· Regulation extéreure
· Coolant antifreeze, prédosé 20 L
|
|
Air/Water heat pump "TeamAO"
FRISQUET provides a heat pump solution of which the main features are to be high efficient, reliable, and also to be very easy to fit up and to use. The last but not the least, TeamAO provides a real heating comfort.
With a range of 8 kW and 11 kW, single or three phase, and an efficiency COP to 4.1, the heat pump TeamAO apply to low energy houses and on the other hand, can perfectly be installed with gas or fuel boilers, or can store an electric resistor (2-4-6 kW stage). In this case, TeamAo constantly measures the COP value and automatically works at the low cost energy.
The TeamAO's supply corresponds to 2 UNITS :
- an outdoor unit with inverter system and heat exchanger. It already contains refrigerant fluid R410A.
- an indoor hydraulic unit whith control and regulating device
|
|
|
The hot-water heaters Thermodynamiques Hekia (or heat pump for Domestic hot water) recover up to 75% of free energy. A cellar, a garage, a boiler room or a linen room are ideal parts for an active recovery of heat. The waste heat of a boiler or dry a linen, of a freezer or refrigerator, it is as many calories recovered by the heat pump to heat free your Domestic hot water by improving its output.
|
|
... see all the products in the category
Heat pumps
|
|
|
