|
|
The MCP-6 series is an independent 6-zone alarm control panel designed for residential or commercial security system.
Utlizing a powerful icroprocessor, MCP-6 control panel offers 6 fully programmable alarm zones plus separate Tamper and PA zones to provide maximum security to all levels of property owner.
Smart Automatic Diagnosis of Loop Resistance (ADLR) makes this panel available with NC or NO alarm devices. Further numerous features and operation modes can be set and programmed via its on-board keypad or optional remote control keypad RKP-6.
The MCP-6 has all the features and functions to offer professional security installers a cost effective alarm control panel.
|
|
|
For installation at the entrance to banks etc. in a desk or in a till. Elegant design which conforms with usual counters and yet is clearly recoginzable as an alarm button. Alarm button with one break contact each for the connection of an alarm and tamper line. White paper disc printed with "ALARM", which must be punctured to actuate an alarm. It can be replaced without the use of tools.
|
|
|
Chubb intruder alarms are designed to be an effective crime deterrent, to detect genuine incidents of forced entry, unauthorised access and personal attack, and to generate an effective response should any of these happen.
|
|
|
Concord Express delivers integrated hardwire/wireless security, providing up to 24 zones of burglary and fire protection. For residential customers-both retrofit and new construction-Concord Express is a valuable and affordable security choice. Its modular design provides flexibility for creating system solutions that customers want. Concord Express is easy to install, simple to use, and complies with SIA False Alarm Standards.
|
|
- 4 partial steps with telephone transmitter STN integrated
- infra-red detection
- order with a keypad information-order and remote controls door-key house automations
- possibility of associating the piloting of an automation.
|
|
Sounders and Signalling
Chubb sounders and signalling devices communicate the current condition of the alarm on-site and remotely to an alarm receiving centre. With a blue strobe and a 110dBA alarm, the sounder indicates when the premises are opened and closed, if there is a mains power failure, and when the alarm is activated. This is critical for a keyholder and the Police when they respond to an alarm activation.
|
|
- Compatible with control panels that communicate using the Contact ID format
- Full event reporting
- Uses GPRSdata channel for high-speed, reliable and low-cost communications to an IP receiver
- 4 on-board inputs
- 4 on-board outputs (open collector)
- SIM card (included)
- Activation and initialization via automated telephone activation system (VRU) or web-user interface provided by CONNECT 24™
- Monitors the panel’s attempts to communicate to determine if GSM backup communications are necessary
- Compatible with Sur-Gard System II/III monitoring station receivers
- UL/ULC listed
|
|
Supports up to 32 total input points (hard-wired, wireless, or combination)
Advanced false alarm reduction
Integrated proximity reader
Speaks language of choice
Introduction
Designed for residential and small commercial applications,
the Easy Series Intrusion Control Panel requires minimal
training and support and is easy to install, configure, and
test. The control center speaks while showing animated
icons, so that the user quickly understands the information
and tasks.
Optional wireless Local SecurityNetwork (wLSN) support is
available in Europe. wLSN provides two-way wireless
communication using the 868 MHz security band, easy
installation, automatic configuration, and a variety of
wireless devices.
|
|
Functional description:
The compact detector of opening makes it possible to protect the exits from your dwelling (main door, window, French window...) in any discretion.
It integrates a magnetic break contact and makes it possible to connect off-set contacts.
Technical description:
Function with the Odyssée power station.
|
|
Functional description:
The siren - flash with transmitter makes it possible to dissuade the intruders and to alert the vicinity.
Sound alarm (110 dB) and visual thanks to the flash.
Technical description:
Exist in version interior siren, without flash.
|
|
Functional description:
The telephone communicator makes it possible to order the security system remotely. It also makes it possible to alert private correspondents remotely (family, friends, neighbors...) or a company of remote monitoring during any release of the system.
|
|
| ... products without information |
| |
Owner of a pool, the law forces to you to make safe the access of your basin to the children of less than 5 years. The Desjoyaux Pools wished to meet your need by proposing JD Alarm Périmétrique to you, alarm perimetric without wire with invisible infra-red raies detecting a passage in a perimeter given, in conformity with the standard
NF P 90.307. Perimetric alarm of protector for privative nonclosed inground pools of individual use or collective which announces a danger,
the rapid intervention of a person in charge is obligatory in the event of release.
|
|
Sensor Domo is a remote information system. Designed to make life easier for the user, it comes in the form of a remote box placed in the house. Sensor Domo contains an alarm siren and comes in 2 formats:
One comes as standard with Sensor Solar and displays pool safety information (this version may also be used as an option to support, Sensor Premium);
the other comes as standard with Sensor Élite and provides the user with pool safety information and comfort information such as water temperature and pH value.
Sensor Domo comes with a main adaptor and 3 alkaline batteries.
|
|
|
|
|
|
Sensor Solar: long-lasting autonomy and information feedback
Sensor Solar is an autonomous immersion detector containing a lithium battery (7 to 10 years%u2019 use depending on conditions) and a solar panel that supports it to increase autonomy. Fixed to the poolside, it has 2 100 dB minimum alarm sirens: one fitted to the central detector unit, the other inside a remote box (Sensor Domo) placed in the house and connected by secure radio link to the central detector unit.
Sensor Solar contains %u201CWind Control%u201D Technology and reactivates automatically after swimming.
Sensor Solar is available from our 2,000 retailers. Complete this form to obtain details of the retailers nearest your home.
specifications
%u2022 Complies with the French and EC Standards
%u2022 «Wind Control» Technology
%u2022 Automatic reactivates after swimming
%u2022 Display of the unsupervised periods
%u2022 Magnetic keys to activate and change modes
%u2022 Integrated 100 dB siren
%u2022 Remote siren 100 dB (Sensor Domo)
%u2022 Failure signal
%u2022 Low battery signal
%u2022 Fixing kit supplied
%u2022 Lithium battery supplied
%u2022 Solar energy
%u2022 Casing resistant to impacts and UV rays
%u2022 Device dimensions: 275 x 220 x 100 mm
%u2022 Parts and labour guarantee: 2 years
product features
%u2022 Central detection unit with probe
%u2022 Sensor Domo (remote siren)
%u2022 Fixing kit (screws, plugs, foam, washers, contact magnets)
%u2022 Installation and user guide + guarantee clauses
%u2022 Test form (for guarantee validation)
%u2022 Manufacturer%u2019s compliance certificate
%u2022 1lithium battery
|
|
%u201CSee without being seen%u201D, is the perfect definition of Sensor Espio.
Designed and developed by our Research & Development teams following requests from users and feedback from professionals, Sensor Espio is an invisible immersion detector.
Sensor Espio is under constant development. It is planned to be launched on the market in the 2nd quarter of 2006.
Sensor Espio is exclusive to MG International.
|
|
|
|
|
|
Sensor Élite: the smart immersion detector
Sensor Élite is an autonomous immersion detector that offers the user information concerning safety and comfort.
Fitted with a lithium battery and a solar panel that supports it to increase autonomy, Sensor Élite is fixed to the poolside. In addition to an integrated siren, it contains a temperature sensor and a pH probe. This information (pool safety, temperature and pH value) are transmitted by secure radio link to a remote box placed in the house and fitted with a siren (Sensor Domo). Sensor Élite is exclusive to MG International.
Sensor Élite contains %u201CWind Control%u201D Technology and reactivates automatically after swimming.
Sensor Élite is available from our 2,000 retailers. Complete this form to obtain details of the retailers nearest your home.
specifications
%u2022 Complies with the French and EC Standards
%u2022 «Wind Control» Technology
%u2022 Automatic reactivates after swimming
%u2022 Display of the unsupervised periods
%u2022 Magnetic keys to activate and change modes
%u2022 Integrated 100 dB siren
%u2022 Remote siren 100 dB (Sensor Domo)
%u2022 Failure signal
%u2022 Low battery signal
%u2022 Fixing kit supplied
%u2022 Lithium battery supplied
%u2022 Solar energy
%u2022 Pool temperature sensor
%u2022 pH analysis probe
%u2022 Casing resistant to impacts and UV rays
%u2022 Device dimensions: 275 x 220 x 100 mm
%u2022 Parts and labour guarantee: 2 years
product features
%u2022 Central detection unit with probe
%u2022 Sensor Domo (remote siren with report temperature and pH)
%u2022 Fixing kit (screws, plugs, foam, washers, contact magnets)
%u2022 Installation and user guide + guarantee clauses
%u2022 Test form (for guarantee validation)
|
|
|
|
|
|
Sensor Premium : the biggest-selling immersion detector
Sensor Premium is an autonomous immersion detector that complies with the French and EC Standards. Powered by a supplied Alkaline battery, it is fixed to the poolside and has a powerful integrated 100 dB minimum siren. With its 2 magnetic keys (supplied) Sensor Premium is easy to install and user friendly.
Sensor Premium may be supplemented by the Sensor Domo remote siren as an option.
Sensor Premium contains %u201CWind Control%u201D Technology and reactivates automatically after swimming.
Sensor Premium is available from our 2,000 retailers. Complete this form to obtain details of the retailers nearest your home.
specifications
%u2022 Complies with the French and EC Standards
%u2022 %u201CWind Control%u201D Technology
%u2022 Automatic reactivates after swimming
%u2022 Display of the unsupervised periods
%u2022 Magnetic keys to activate and change modes
%u2022 Integrated 100 dB siren
%u2022 Failure signal
%u2022 Low battery signal
%u2022 Fixing kit supplied
%u2022 Alkaline battery supplied
%u2022 Casing resistant to impacts and UV rays
%u2022 Device dimensions: 275 x 220 x 100 mm
%u2022 Parts and labour guarantee: 2 years
product features
%u2022 Central detection unit with probe
%u2022 Fixing kit (screws, plugs, foam, washers, contact magnets)
%u2022 Installation and user guide + guarantee clauses
%u2022 Test form (for guarantee validation)
%u2022 Manufacturer%u2019s compliance certificate
%u2022 1 x 9V alkaline battery
|
|
Security Pool
Child Siter
Pool alarm Bracelet
Adaptable For the Pets
Characteristics
- Sure & Reliable
- Alarm of more than 90 dB
- The bracelet frog is equipped d%u2019une buckles locking
- Conforms to standard FCC
- Functions in a ray of more than 60 meters
- Radio operator Integrated FM
- In the event of problem d%u2019alimentation, a food by piles can take the relay - Each bracelet is associated according to its color with an alarm
- There exist 6 different colors of bracelet
- Adaptable to the Pets
|
|
|
JD Alarm is a system of alarm for privative nonclosed inground pools of individual use or collective which announces a danger, the fast intervention of a person in charge is obligatory in the event of release.
|
|
| ... products without information |
| |
|
Acoustical alarm transmitter with 26 selectable tones, power supply: 10-28V / 0,03A, loudness: 80-116dB, adjustable, dimensions: ø 92mm, height 75mm, protective system: IP 54, colour red, VdS-approval number: G296013, connection possibility for triggering of a second tone, additional module AM 41 or AM 41-Z required in conjunction with RZN 4100 and RZN 4300, possibility of remote cutoff in conjunction with general display panel SF 43-A or SF 43-AZ
|
|
|
Piezoelectric buzzer in three versions, power supply: 24V / 0,02A, loudness: 90 dB, additional module AM 41 or AM 41-Z required in conjunction with RZN 4100 and RZN 4300, possibility of remote cutoff in conjunction with general display panel SF 43-A or SF 43-AZ
|
|
|
|
|
|
The GE Security FireworX fire alarm family consists of 3, 5, and 10 zone conventional fire alarm control panels, and integrated upload/download DACT/Dialer, serial annunciator modules, and serial remote relay modules, all microprocessor-controlled. The FireworX family is ideal for both new and retrofit installations alike.
FireworX incorporates features designed to simplify installation, operation and maintenance. These include front panel programming, one person walk testing, and selectable IDC and NAC types. In addition, these panels have combination waterflow and supervision IDC. Options for the FireworX panels include serial bus relay modules programmable for common or zone activation, serial bus remote annunciators, city tie and reverse polarity modules, and optional trim rings for semi-flush mounting. An optional fully integrated upload/download DACT/Dialer provides 32 character LCD display, event history log, support for contact ID and SIA DCS 4/2, and upload/download of Panel/DACT configuration, status and event history.
|
|
|
|
|
|
Modular Walls with concealed monitoring technique for added security
The protection of Art requires a highly sophisticated security technique that is not visible to visitors and which does not influence the aesthetic of Art or objects being displayed.
At the same time, the modular walls are required to be flexible for designing Temporary, Traveling, and or Art Exhibitions. MBA Design & Display products Corp. has developed a unique security technique that conceals the detection field inside the wall.
mila-wall® modular walls can be prepared for concealed object monitoring that can be connected to an alarm system. Electrodes are built into the wall in a defined area (as shown). This area creates an electrical detection field when connected to an alarm system of your choice. An electrical field will surround and protect the art or object hung on the wall module. Any change of the field by people or objects will change the electrical field which in turn releases an announcement. This announcement can be forwarded to a facility alarm system or it can release an optical or acoustical alarm directed at the protected object. The electrical field begins at approximately 39” (1000 mm) from the bottom of the wall module and ends at approximately 98” (2500 mm) from the bottom. This provides a detection field of approximately 60” (1500 mm) in height. The sensitivity in which an alarm is released can be adjusted to meet your requirements. The maximum detection distance begins approximately 15 ½” (400 mm) away from the wall module.
|
|
|
|
