|
|
|
WILLSTRONG® natural ACP consists of an extruded thermoplastic core laminated between two sheets of aluminum. It is finished just like natural marble, granite and wood. WILLSTRONG has developed WILLSTRONG® natural ACP more than forty kinds of colors, such as red cherry, golden peacock, brecha marron, india red, green marble etc, and more and more colors design will be created to meet the demands in the market.
|
|
|
|
|
|
|
WILLSTRONG Aluminum Composite Panel owns advanced technologies, strict quality control process and continuous innovations, which makes WILLSTRONG to meticulously control the tolerance, flatness, the thickness and finish quality of each panel. The bonding of the aluminum and the core is achieved by both chemical and mechanical ways, giving each WILLSTRONG Aluminum Composite Panel an extraordinary bond integrity. WILLSTRONG Aluminum Composite Panel are protected and colored by Polyvinylidene Fluoride (PVDF), Polyester (PE) paints and PET films. Panels to be applied for high building cladding mainly utilize coating of KYNAR500/HYLAR5000 PVDF resins in order to guarantee an outstanding color uniformity, UV fade resistance & gloss retention finish. The paint also provides excellent flexibility & film adhesion for forming, and offers superior resistance to humidity, impact, salt spray, pollution, abrasion & graffiti. The luxurious, bright-colored, marble and wood print finishes give so many choices for architects to completely perform their creativity. WILLSTRONG Aluminum Composite Panel has been successfully applied in some places of harsh condition, such as the North Pole region in Russia, and the Equator area in Indonesia. Hundreds of applications have proved that WILLSTRONG is believable. WILLSTRONG / FR is composed of a low density non-combustible Polyethylene Core sandwiched between two sheets of Aluminum of 0.5mm thickness.
|
|
|
|
|
|
Top quality for a successful product
Mirawall was the first continuous pre-painted rolled aluminium section using powder paints to be made and sold in Italy. Painted with very flexible special thermosetting resin-based powder paints, Mirawall can undergo any sort of processing keeping intact its original colour and with excellent resistance to mechanic deformation. Thanks to the protection of the aluminium support given by the paint, Mirawall can stand up to the worst weather and pollution without any sort of blistering. For these features and the excellent smooth and fault free surface, Mirawall rolled sections are constantly used in a wide range of building applications, from facade coatings to complementary parts for window and door frames. Mirawall is addressed to those seeking a safe and innovative material for interior coating and the design industry: a growing number of designers now choose Mirawall solid rolled aluminium sections in place of compound and thermoplastic materials, thanks to their total resistance to fire and, last but not least, the endless range of available colours. In fact, the Otefal Group now offers more than 500 finishes that can be customised to satisfy any sort of specific customer request: the complete range of RAL colours and the innovative metallic and speckled colours, all of which are continuously being updated to follow customer and market trends.
|
|
|
|
|
|
IRIDESCENT FINISHES: DWALL IRIDIUM
Subjected to the liquid coating process, Dwall Iridium rolled aluminium sections are characterised by their innovative finishes, which come in iridescent shades.
Special pigments contained in the paints make Dwall Iridium an amazingly attractive solution that is also extremely resistant to weathering and sudden changes in temperature.
The technical and performance properties of the finished product mean its appearance and gloss withstand the test of lengthy exposure to the sun, and the product comes with an amazing thirty-year warranty.
The combination of light and colour in Dwall Iridium also sparks designers' creativity, providing them with a range of basic colours to play around in
order to produce the desired shades.
METALLIC FINISHES: DWALL METALLIC
The range of liquid-coated aluminium panels called Dwall is now even more attractive in a new series of extremely fashionable, elegant, metallic-effect finishes.
All Dwall Metallic panels are dual-coated, i.e. given two coats of paint: an additional guarantee of resistance to achieve high-quality architectural finishes and panelling. The special colour effect of the metallic finishes, which can enhance even the most simple shapes and volumes, is achieved by taking a resin base - PVDF or polyester resins - and adding different percentages of special pigments formulated with aluminium or with mica
platelets to give the colours this distinctive effect.
The metallic paints chosen to augment the DWALL range of colours have been borrowed from the automobile world, from prestigious marques including BMW, Volkswagen, Mercedes…
|
|
|
|
|
|
DMAX: 100% SOLID ALUMINIUM FOR ARCHITECTURE
There's now a new, very high performance, continuous-
coated rolled aluminium section for creating
the most modern architectural curtain walls:
its name is DMAX.
DMAX HAS ALL THESE ADVANTAGES:
• perfect flatness
• in Aluminium-Magnesium alloy, series 5000
• extra-thick solid metal (from 2 to 3 mm thickness) for unrivalled mechanical resistance
• PVDF coating applied in 2, 3 or 4 coats
• available in innovative finishes: pastel, metallic, iridescent and personalized colours
• personalized packaging
• thorough, strict, certified quality controls
• very thick protective film, personalized with DMAX logo
• delivery time: extra fast.
DMAX was conceived precisely as a tangible response to the frequent demand for 2/3 mm "Panel Quality" aluminium, producing a solid metal alternative to the usual aluminium/plastic composites.
This is why Otefal has come up with a new line of products, offering even higher performance than their predecessors, that can apply the PVDF super-coatings even on very thick metal.
The DMAX aluminium rolled section therefore makes a more affordable
alternative to the usual rolled composites by virtue of its many qualities - flatness (continuous stretching), workability (no milling or riveting for cassette panels), a wide range of finishes (metallic, iridescent or pastel) and, last but not least, its competitive cost.
|
|
Advised apply:
roofing and wall cladding
Workings:
notching
Minimum slope:7%
Standard production:
row aluminium
prepainted aluminium
prepainted steel
aluzinc
copper
stainless steel
|
|
|
|
|
|
COLT BRINGS STRUCTURE TO THE BUILDING ENVELOPE
Louvre walls and panels are popular with designers for many applications in industrial and commercial buildings. Their purpose can be to control light entry, to provide ventilation whilst maintaining rain defence, to provide screening, or a combination of these. Louvres can also be provided simply for aesthetic impact.
Colt louvre systems are highly adaptable. They are available in various configurations, materials, finishes and coatings to meet the requirements of almost any project. Besides louvre panels being available in aluminium, there are all manner of glass, textile, wood, terracotta clay and translucent acrylic louvres available depending upon the aesthetic and energetic requirements.
Colt louvre systems can be uniquely configured to provide the solution to your needs. They can be engineered to provide high aerodynamic performance and excellent rain defence.
TO SUMMARISE:
Colt's holistic approach is based on the integrated use of different technologies and focuses on:
- reducing the building's cooling requirements with a solar shading system
- enhancing the quality of natural daylight
- Integrating into the building envelope solar energy conversion systems such as photovoltaic cells.
Architects and building designers can chose from a wide portfolio of solutions, and Colt experts have the specialist experience to help them identify the best design, also
supplying calculations and simulation models.
'Colt louvre systems - Give facades a face'
|
|
VERSATILE VENTILATED SYSTEM
Our Ventilated Open Structure Façade systems allow light and air to travel easily through the system and establish a crisp, clean aesthetic. Traditionally built with linear panels, Open Structure Façades prove useful in a number of applications, including ventilated fences around mechanical systems such as cooling units. With our flexible open-structure systems, the possibilities are wide open.
Hunter Douglas Open Structure Façades offer excellent design, functionality and comfort:
• Performance - optimal airflow and light entry
• Economic value - outstanding durability and produced in a highly efficient way
• Green characteristics - aluminum alloy is fully recyclable at the end of the façade lifecycle
• Aesthetic product - linear and open structure façades come in multiple colours and shapes that provide design freedom
• Ease of use - simple installation and virtually no maintenance
|
|
Kalzip TF façade system
Suitable for both new build and refurbishment, the distinctive Kalzip TF37/800R aluminium profiled cladding provides a distinctive and functional solution for horizontal or slightly pitched building elevations.
The clean-cut appearance of the profile enhances the effect of light and shade across the façade area and is ideal for projects where a non industrial appearance is required. Lasting protection for the existing building structure is offered due to its compatibility with a variety of substructures, such as metal, concrete and wood.
Lightweight and flexible the TF37/800R façade is available in a comprehensive range of colour coatings and is supported by a selection of special details that have been developed to provide perfect interfaces with other building elements and systems.
|
|
Aluwall represents a modular panel system for external facing molded to measure and painted according to the RAL table.
The panels are made of aluminium, with thickness ranging from 1.5 to 3 mm, depending on the size of the panels. Minimum 100 micron thick polyester powder paint.
The panels are hooked to a vertical load-bearing structure. The bayonet hooks ensure easy, fast installation.
The panels can be shaped in different ways to obtain numerous, original and modern aesthetic variations.
The distance of the panels from the wall ensures a ventilated interspace, and helps modify the architectonic appearance of the building, without the need for modifying the structure.
|
|
|
|
|
|
ALUCOBOND® plus has been developed exclusively for the higher requirements of the fire regulations in architecture. Due to its mineral-filled core ALUCOBOND® plus plus meets the higher requirements of the fire classifications. It is hardly inflammable and offers all the proven product properties of the ALUCOBOND® family, such as flatness, formability, resistance to weather and simple processing.
ALUCOBOND® plus perfectly adapts to the contours of the buildings forming complex, flowing elements. It is the combination of formability, flatness, stability and weather resistance that characterizes this material. Due to its composite structure, ALUCOBOND® plus can take on many different shapes. It is almost like a different skin wrapping the building structure. Its perfect formability does not affect its stability and flatness. The high rigidity of the panel remains.
The composite structure of ALUCOBOND® plus results in an impressive strength-to-weight ratio, even when comparing large panel sizes. Despite its low weight, which makes ALUCOBOND® plus easy to transport and handle in the factory and on site, its rigidity and high strength make the panels keep their shape and remain flat, even when exposed to extreme temperature changes.
|
|
|
|
|
|
ALUCOBOND® A2 is the only non-combustible aluminium composite panel used in architecture world-wide. Due to its mineral-filled core ALUCOBOND® A2 meets the high requirements of the fire regulations and enhances the possibilities for the concept and design of buildings.
ALUCOBOND® A2, as indeed all the products of the ALUCOBOND® family, allows simple processing, is impact-resistant, break-proof and weatherproof and, above all, non-combustible.
ALUCOBOND® A2 is a composite panel consisting of two aluminium cover sheets and a mineral-filled core. The superb properties of this material boost one's inspiration and offer architecture a whole new range of solutions - whether your project is a private home, a public building, a corporate headquarter and offices, or a trading or industrial complex - or if your organisation wants to create a new image-building Corporate Design - whether for petrol stations, car showrooms, banks or supermarkets.
ALUCOBOND® A2 perfectly adapts to the contours of the buildings forming complex, flowing elements. It is the combination of formability, flatness, stability and weather resistance that characterizes this material. Due to its composite structure, ALUCOBOND® A2 can take on many different shapes. It is almost like a different skin wrapping the building structure. Its perfect formability does not affect its stability and flatness. The high rigidity of the panel remains.
|
|
|
|
|
|
ALUCOBOND® is a composite panel consisting of two aluminium cover sheets and a plastic core. The superb properties of this material boost one's inspiration and offer architecture a whole new range of solutions - whether your project is a private home, a public building, a corporate headquarter or offices, or a trading or industrial complex - or if your organisation wants to create a new image-building Corporate Design - whether for petrol stations, car showrooms, banks or supermarkets.
ALUCOBOND® perfectly adapts to a building's contours, flowing elements. It is the combination of formability, flatness, stability and weather resistance that characterizes this material. Due to its composite structure, ALUCOBOND® can take on many different shapes. Though both stable and flat ALUCOBOND® can be perfectly formed without any loss to its rigidity.
The composite structure of ALUCOBOND® results in an impressive strength-to-weight ratio, even when comparing large panel sizes. Despite its low weight, which makes ALUCOBOND® easy to transport and handle in the factory and on site, its rigidity and high strength make the panels keep their shape and remain flat, even when exposed to extreme temperature changes.
|
|
ALUCORE® is an aluminium composite panel consisting of two cover sheets and a honeycomb core of aluminium.
Following in the footsteps of the world-wide established ALUCORE® trademark, ALUCORE® is also a composite material for a variety of applications in transport, architecture or industrial production, showing excellent product properties such as extraordinary flatness, large variety of colours and high formability.
The aluminium honeycomb core gives the composite panel a high rigidity and an extremely low weight. ALUCORE® therefore provides the decisive advantage where very high demands are made on the material for applications such as façade cladding or roofing, e.g. if exposed to extremely high wind load and for large self-supporting roofs.
ALUCORE® is the first lightweight panel that you, too, will absolutely insist as being: a bond for life.
|
|
|
|
|
|
PROF2000® is the Novelis brand name for its polyester-powder pre-painted aluminium rolled products. This painting technique gives PROF2000® the same surface as post-painted extruded products so that the two can be perfectly coupled. Thanks to this fact PROF2000® can be used in the building industry (for facade cladding and its ancillary components) and as well as for industrial applications.
PROF2000® is used for internal covering of tunnels. The characteristics of the painting cycle make this product suitable for this application, as it eliminates the dazzling phenomenon.
The high paint thickness ensures easy periodic cleaning of the tunnel. Since the panels are light and they are produced in modules, their maintenance is simplified and they can be replaced without problems in case of damage. PROF2000® is certified to class 0 (Italian D.M. 14.1.85), the highest ranking in case of fire resistance.
Thanks to its wide range of colours PROF2000® represents the ideal solution to support the designer’s imagination and creativity. Hundreds of colours and possible shades can meet all needs. Novelis is ready to match new special colours on demand.
Set your mind free!
|
|
FF2® is available in a large number of colours. With a RAL, NCS or PPG reference number new colours can be produced specifically for you.
The continuous coil coating process ensures long lasting, brilliant colour effect. The paint system has proved itself time and time again in extreme climates.
PVdF-Coating (80/20)
PVdF-Coating is UV-resistant and is environmentally friendly
Sea water resistant
The paints will not become brittle as a result of weathering
Surface is dirt repellent
Aluminium is 100 % recyclable, without loss of quality
Wide range of colour shades
FF2® is non-combustible (A1 tested)
|
|
Pre-painted aluminium sheet polyamide paint for building and industrial applications
WINDY® is the Novelis brand name for its aluminium coils which have been pre-painted with polyamide paints. WINDY® is used in the building industry, especially in facade cladding, but also in windows frames. The excellent formability, the good bending behaviour of the product and the good resistance to UV rays make WINDY® particularly versatile and adaptable to different architectural solutions and industrial applications.
WINDY® is protected with polyamide paints and it is characterised by an excellent resistance to corrosion caused by weathering. Additionally, it has a superb resistance to the rays of the sun, above all UV rays, which cause colour degradation.
WINDY® guarantees excellent overall corrosion resistance thanks to a protective primer laid on the reverse side.
|
|
FF3® Prepainted aluminium facade panels in 3-mm thickness offers architects and building owners creative design solutions in façade cladding.
Due to its high strength - and in contrast to other alloys - FF3® provides (in the same material thickness) much larger span width, making installation and substructures less expensive. Large-size sheet - in big formats up to 2000 x 8000mm - allow for sophisticated architectural solutions and can be installed quickly and economically.
As the alloy used for FF3® Prepainted Aluminium is appropriate for welding purposes, the studwelding technique can be applied. This enables invisible fixings on flat sheet panel façades. The advantages of this technique provide quick and economical façade installations which of course do not affect the decorative front side of the sheet
|
|
|
|
|
|
Petersen Aluminum Corporation has provided the “M” and “R” exposed fastener panels in the past and has now expanded its panel offerings even more. We have introduced the 7.2 Rib, the 7/8” Corrugated Panel, the 1/2” Corrugated Panel and additional coverage widths of the “M” and “R” Panel to the lineup. These profiles provide unmatched flexibility for use in roofing, wall, interior and linear panel applications in a cost-efficient yet architecturally attractive metal panel.
The 7.2 panel provides superior versatility in roofing projects with high wind load requirements and longer spans. This profile has been tested extensively per ASTM 1592 and has excellent negative load capability even for high-wind pressures.
The 7.2 Panel is available in a full range of gauges and materials, and provides a 36” wide coverage. It is ideal for roof slopes as low as 2:12, however, it can meet slopes of less than 2:12 in some applications. Contact the local PAC rep for projects with less than 2:12 slopes for product application assistan
|
|
CGLWALLPLANK SYSTEM
incorporating coil-coated aluminium
The system features are -
High quality Pvdf paint finish
Plank width choice from 150 %u2013 350mm
Plank lengths up to 4400mm
Plank joints 5-30mm wide
Full system warranty available
Superb metallic and flat colour choice
Perfect colour consistency
|
|
|
|
|
|
New Kalzip FC facade system
Innovatively and economically by the singular Vario Systemmontage with penetration-free transfer
The innovative, flexible Vario Systemmontage is the outstanding feature of the new Kalzip FC of facade system. The installation of the aluminum profiles can take place both into both directions, alternatively from downside upward or from above downward, and independently of adjacent panels in the midst of one front surface which can be installed. Thus the assembly becomes enormously economical. As given, building-lateral obligations can be coordinated as stand positions or connection work flexibly and independently of the assembly process.
The wide panels according to standard with head tilting and moved penetration-free without are offered to rivets or screws on raster clicking rails. The matured system considers all detailed solutions and as complete package inclusive sub-construction is offered. System-conformal hitting a corner training make a gentle and harmonious accentuation for building geometry possible and underline thus the esthetic total effect of the front.
Exchange of individual elements possible
The Kalzip FC facade system is in such a way designed that individual panels can be changed when damage simply and problem-free. The complex and expensive exchange of whole front surfaces is void. The behind-ventilated facade system is equally suitable for redevelopment and new building. It is similarly to the Kalzip roof system with different surfaces and a broad Farbpalette (colorcoated surfaces in all RAL and special colors) available.
|
|
Continuous louvre system blade (pitch 33.3mm): generally used for smaller areas, feature shapes and curves
|
|
|
Continuous louvre system blade (pitch 66mm): the largest of the small format louvres retaining good airflow characteristics whilst providing a substantial degree of weatherability.
|
|
Continuous louvre system blade (pitch 95mm): extra heavy duty profile with extra high air flow, primarily used for industrial applications
|
|
Reynobond® XXL, our 2000 mm wide aluminium composite panel, opens up broad new creative horizons for you.
Benefits include fewer joints, fewer cuts and reduced fabrication and erecting costs.
Reynobond® XXL is also perfect for combining with other 2000 mm wide façade products like glass.
|
|
FunderMaxExterior Alucompact 42 F with decors from the FunderMaxExterior collection are extremely resistant to fracture, large-format panels for cladding facades and balconies.
FunderMaxExterior Alucompact 42 F quality panels are duromer high-pressure laminates (HPL) as per EN 438-6, type EDF with extremely effective weather protection. The weather protective coating consists of double hardened acrylic polyurethane resins. They have a 0.42 mm thick aluminium strip underneath the decor layer on both sides. The aluminium strips give the panels extremely high tensile strength and rigidity. This enables the production of perforated balcony elements, or the spacing between the mounting points to be increased.
|
|
Tiles in perforated
aluminium sheet, 50x50 cm. Other dimensions upon request. Choice of RAL
colours: Ideal for indoors and outdoors.
|
|
|
|
|
|
Features
- Horizontal (FWDS-H) and vertical (FWDS-V) designs available
- A variety of reveal, thickness and profile configurations are available, providing design flexibility and options for exterior walls
- Concealed clips and fasteners plus dry gaskets and concealed sealants provide a clean, uninterrupted appearance while minimizing exterior dirt streaking and staining
- Factory foamed for dependable thermal performance
- Profiled and flat panels integrate with CENTRIA Formavue® window systems, and most glass wall and window systems
- Rainscreen Principle horizontal joinery provides superior weather resistance
- Pressure equalization achieved through vents along the panel length where required
- Factory-formed sheet metal flashing or extruded aluminum trim available
- Can be easily curved or formed
- Panel mitering permits clean, sharp corners, beam and column wraps
- Trimless ends
- Thermal break between face and liner
- Lightweight - easy to handle and install; less framing required
- Stainless, striated, smooth and embossed surface treatments available
Metal
- Standard - 22/26 gage [0.76mm / 0.48mm], 22/22 gage [0.76mm / 0.76mm]
- Optional gages available, consult CENTRIA
- G-90 (Z275) galvanized steel; optional stainless steel or aluminum available, consult CENTRIA
|
|
Riblok 300
Riblok 300 has been developed to meet the ever increasing demands for forecourt canopies where it is necessary to have clean soffit lines with a durable material providing long life with low maintenance requirements.
Success has led the product application being extended to utilization in fascias, soffit applications and vertical wall designs for industrial and commercial buildings. The finished installation provides a substantially flat façade. Whilst not designed as optically flat, the solution is architecturally pleasing and economically efficient when compared with other products.
|
|
|
|
