|
|
|
SHOT 280 projector for accent lighting. Supplied with a tempered glass protector, stainless steel screws and silicone joints that give it IP65 protection grade. For one-colour LEDs, available in white, blue, green and red. There are also models for RGB LEDs, one that is controlled by a pushbutton and another controlled by RGB remote control.
|
|
|
Exterior decorative surface spotlight, made from injected aluminium and painted in metallic grey. With tempered for glass closure IP65. Various accessories are available for different surfaces. Para 12v 50w QR-CBC51, incandescent PAR-20 or LED lamps.
|
|
|
GREEN 96 projector for exteriors, manu-factured from injected aluminium, lacquered in texturised grey polyester. Supplied with a tempered glass protector, stainless steel screws and silicone joints that give it IP66 protection grade. Various accessories are available to adapt the projector to a variety of surfaces and prevent glare. For QR-CBC51 type lamps with equipment included
|
|
|
SHOT 360 projector with cold stamped aluminium reflector for pedestrian or street lighting. Injected aluminium body, lacquered in texturised grey polyester. Provided with a thermal shock-resistant tempered glass protector, stainless steel screws and silicone joints that give it a protection grade of IP65. For HIT 150W lamps.
|
|
OUTMAX
Projector OUTMAX, for 1 x high-pressure sodium vapour lamp 50W with lampholder GX12-1, horizontal rotation 360°, composed of one housing, in cast aluminium, rectangular, jet black (RAL 9005), with reflector, in pure aluminium, silver anodised, narrow flood (S1), with protective glass, clear, vertical adjustment 30°/180°/30°, protection class I, protection degree IP65, with electronic control gear, with fixing rose
|
|
5725 Alfort - Ground embedded projector size circular Ø 280 mm, equipped with Ledmodules (LMS) and stainless steel housing, offering various options:
Choice of colour: cold or warm white, blue, yellow/amber, red, green and quadrichromy.
Choice of optics: beam angle at 8°, 36° or 8x50°.
The proyector is orientable in rotation (60°) and in inclination (± 20°).
Optional control via DALI or DMX interface.
Classified IP67
Load up to max. 5000Kg
|
|
|
Die cast aluminium Flood Light, complete with manoeverable 110° mini P.I.R polycarbonate detector head. The unit is weatherproof and easy to install. Each fitting is complete with 500w or 150w halogen lamp.
|
|
Uppy design Silvio De Ponte
Outdoor floodlight for halogen, discharge and high pressure sodium lamps. In die-cast and extruded aluminium and tempered glass. Finishing resistant to atmospheric phenomena. Adjustable up to 180° on the horizontal plane. Vandal-proof version available for public places. Protection degree IP65 and IP66/IP67.
Wiring
- Remote wiring (maximum distance 10 mt.) and built-in wiring.
- Low-leaking watertight supply unit with thermic protection
Construction features
- Floodlight: extruded and die-cast aluminium body; tempered transparent glass
- Supports and screw: made of galvanized steel
- In vandal-proof versions the wire is protected by a spiral, grey-coloured PVC-sheathed galvanized metal tube (FE/ZN3), equipped with a stainless-steel wire fastener
Colours
- Silver grey
- Anthracite grey
|
|
Mini LED spot light
This small spot light is discreete and has an harmonious design.IT features a bright LED. Designed to underline the details of a façade or of a building.
|
|
Adjustable Moving Head LED spotlight projector
Discreet and harmonious design, this small spotlight is
equipped with 6 to 12 SUPERWATT LEDs, many optics and LED colours.
Aluminium body Ø120mm (stainless steel for permanent immersion) Polycarbonate window Ø 105 - Anti-uv, scratch and vandalism proof
Adjustable 3 axis
IP68
|
|
GEMINI PROJECTOR LED
HBLED Projector on Bracket for technical lighting IP67
Aluminium body covered by epoxy grey paint, high transparency glass and high resistance (IK10), silicon sealing gasket for high temperatures, stainless steel tightening screws.
Alternative finishing available on demand (aluminium, 316L Stainless steel, special painting any colour on demand.
RGB VERSION
Supplied with a 6x0.22mm² cable 3mt long and equipped of special connector to interface the other components of RGB piloting system.
MONOCHROME VERSION
Supplied with a 2x0.75mm² cable 1m length
All the products of this range need an external power supply available in our accessories range.
|
|
|
|
|
|
|
SWAN is an efficient general purpose white light LED floodlight that uses thirty-six 2,4W bright white LEDs. Fitted with the highest precision technology and the latest software developments, the LEDs utilized have been coupled with the most effective lenses to give an incredibly homogeneous daylight white output. The unit can be customized with a choice of 10°, 30° or 45° lenses to suit additional requirements of alternative beam creations, always preserving the highest luminous efficacy. SWAN is also available both with 3200K and 6500K white light to meet any design specification. The extruded aluminium body is equipped with heat sink fins for an optimized thermal management and the enhanced silent operation is conveyed by the use of magnetic levitation motor fans. SWAN's environmental impact is really small with no ultraviolet radiation and infrared emanation, an exceptionally low power consumption and a drastically reduced maintenance requirement, where the life of the light source is remarkably extended compared with any other conventional lighting equipment and no lamp replacement is requested. Wall, ceiling or surface mounting can be comfortably achieved by the built-in fixing yoke and the optional display plate. The compact outline features a robust and durable extruded aluminium housing certified to an IP65 weather protection for the widest variety of applications such as accent, display, effect and landscape lighting.
|
|
Introducing Masque, a single family of exterior lighting products to accentuate architectural details, building facades and canopy lighting.
Masque offers four scaled luminaires from the diminutive Masque I to the significant Masque IV.
|
|
SPOT ON QUADRANT Æ 168mm
IP 67 - 960° - 20 joules - Class III -
Coasts of embedding: Overall Ø: 185,4 mm - Htor of the spot: 52,5
Htor with quadrant: 143,5
|
|
|
Outdoor colour changer with 18 x 3W P5II full colour leds, based on RGB system and driveable by DMX 512-A. 3-4-6-7-12 channels DMX (RGB or HSV), strobe and rainbow effect at adjustable speed, separated dimmer and temperature of colour control, flicker free, digital dispaly for presets and automatic games in stand-alone.
|
|
Floodlights
with mounting box
Safety class IP 65 · Safety class II
· for fluorescent lamps with electronic ballast
TCA-SE · TC-TSE · TC-DSE
Glass-fibre reinforced plastic
Reflector of pure anodized aluminium
Mounting box ø 90 mm
2.5 connecting terminals
Adjustment of the burning position and relamping
without tools.
|
|
|
|
|
|
|
Transparent architecture and ever decreasing public space in many cities, mean that factors such as visual comfort and limitation of glare are important criteria when selecting outdoor luminaires. The Focalflood produces a wide light distribution with the focal point in the centre of the beam. They are therefore particularly suitable for efficient lighting of facade surfaces as well as broad trees and shrubbery. At the same time, Focalflood also offers exceptionally high visual comfort with a cut-off angle of up to 50° passers-by, traffic users and people inside the building all benefit from Focalflood's all-round glare control. This results from the special design of the reflector contour and reflector surfaces. As a special feature, the version of the Focalflood for T16 fluorescent lamps is also available with Varychrome technology with electronic control for an extensive range of light colours. With their double powder-coated, IP65 cast-aluminium housings, these floodlights have long-term resistance to outdoor conditions. The smooth-surfaced design reduces dirt accumulation. Focalflood floodlights use the same versatile mounting accessories as the Beamer projectors and Parscoop washlights. They can therefore be easily combined for ambitious lighting concepts. The DALI-compatible luminaires feature digitally addressable control gear, which can individually address every single luminaire, i.e. using the ERCO Light System DALI and the pre-programmed ERCO Light Studio software.
|
|
STELVIO CYM 300 uses the MSD 250 lamp, which due
to its short arc produces even more light output than from
the HQI-TS used in the Vesuvio OS CYM 250. The colour
mixing system with cyan, yellow and magenta dichroic filters
creates virtually unlimited colour hues, coupled with smooth
blends between colour changes. Colour sequences can be
selected from a pre-programmed internal controller, with
multiple unit synchronisation possible, or controlled from the
IP65 dedicated DMX controller or from any DMX512 control
system. Remote lamp ON/OFF control and dimmer/strobe/
black out functions available.
|
|
|
The Arida 500 and 900 Series offer two fully rotatable and adjustable luminaire housing sizes in 5" and 9" diameters. All Arida luminaires are Underwriters Laboratories and Canadian Standards approved for wet locations.
|
|
Stylish and high specification 70W asymmetrical discharge floodlight, ideal for usage in all architectural, display and retail applications where a powerful yet low consumption and long lasting field of light is required.
Features:
- 70W or 150W operation (Rx7 bases)
- Asymmetrical or Symmetrical reflector
- Color frame, safety glass and 5 foot power cable standard
- Standard Black, optional White or Sliver
- Optional barndoor, clamp, safety cable and mounting kits
|
|
Powerful and dependable the Britelight can be configured for studio or architectural use. Build to serve Hollywood's highest standard this fixture is the choice of professionals the world over. The Britelight family of fixtures is built around four power levels and three reflector sizes. Choose the one for your application.
Features:
- Precision 20" electroformed reflector
- Motorized lamp focus (Studio version)
- Available in Studio and Architectural configuration
- ETL listed for wet locations
- Architectural version includes remote control, auto strike, and auto cool down
- Studio version includes lightweight electronic power supply with DMX remote control
|
|
|
PYROS: professional projector for discharge lamps up to 250W. Maximum horizontal and vertical adjustability with diecast aluminium joints. Aiming stability and precision guaranteed by the graduated ring and mechanical position locking system. Quick IP67 electrical connection system hidden inside the fixture arm with through-wiring using 2 PG11 cord grips. Relamping is possible without the use of tools thanks to the 3 rapid knobs positioned at 120° on the fixture body. Relamping can be carried out without having to remove any of the accessories mounted.
|
|
cornice ip55
IP 55 lighting fixture for indoor and outdoor applications in polished stainless steel, or grey or white painted. Designed to be placed on capitals and frames, takes it Rx7s 70W metal halide lamps, complete with electronic power supply unit, or linear halogen lamp R7s 200W.
|
|
|
standing floodlight for indoors or outdoors made of peraluman aluminium alloy. it features frosted or transparent glass and an IP67 protection rating. it can take halogen, fluorescent or metal halide lamps. louver and anti-glare ring (only for halopar 30 lamps) are also available. impact test resistance at IK10 20J (Joules).
|
|
Power supply: AC110V-240V, 50/60HZ
Control method: Master/slave mode, synchronic mode.Any channels combination can be set up. Programmable mode,Demo,Controller mode
High-temperature auto protection
Grey 256
Strobe: 1-8flash per second
Protection grade: IP65
Beam angle: 15°25°38°
Life: about fifty thousand to one hundred thousand hours
Dimensions:350*285*275mm
N.W:4kgs G.W:5kgs
|
|
Power supply: AC110V-240V, 50/60HZ
Control method: Master/slave mode, synchronic mode.Any channels combination can be set up.
Programmable mode,Demo,Controller mode
High-temperature auto protection
Grey 256
Strobe: 1-8flash per second
Protection grade: IP65
Beam angle: 20°25°
Life: about fifty thousand to one hundred thousand hours
Dimensions:585*445*295mm
N.W:10.5kgs G.W:12.5kgs
|
|
Power supply: AC110V-240V, 50/60HZ
Control method: Master/slave mode, synchronic mode.Any channels combination can be set up.
Programmable mode,Demo,Controller mode
High-temperature auto protection
Grey 256
Strobe: 1-8flash per second
Protection grade: IP65
Beam angle: 15°25°38°
Life: about fifty thousand to one hundred thousand hours
Dimensions:440*440*265mm
N.W: 11.5kgs G.W: 13.5kgs
|
|
|
|
|
|
Housing/frame: In die-cast aluminium with cooling fins.
Reflector: Asymmetric, in anodized polished and hammered 99.85 aluminium, 2µ thick.
Diffuser: Tempered glass, 5 mm thick, thermal shock and impact resistant (UNI 7142 tests - British Standard 3193).
Painting: With polyester powder, black, upon chromate treatment, resistant to corrosive and saline environments.
Lampholder: In ceramics, with silver-plated contacts.
Electric gear: 230V/50Hz supply with thermal protection. Silicone wire terminated with admiralty brass clamps; fibreglass braid insulation - cross-section: 1 sqmm (up to 400W) or 2.5 sqmm (400 to 1000W). 2P+T terminal block (maximum allowed lead cross-section: 4 sqmm).
Equipment: Gasket in silicone rubber. Cable gland in f.g. nylon, Ø 1/2 gas thread. Retained steel screws with special anticorrosion and anti-gripping treatment. Bracket in steel with protractor scale. The hinge-opening front frame stays hooked to the fixture housing.
Regulations: Produced according to applicable EN60598-1 CEI 34 - 21 standards, IP65IK08 degree of protection according to EN 60529 standards. They have obtained the ENEC European certification of conformity.
Wind surface: 2400 sqcm.
|
|
A miniature mains floodlight for 20W metal halide, halogen capsule lamps or PCB 3 LEDs 1W with a selection of glasses and attachments
Ideal for precise lighting of sculptures, plants, trees or signage, or the emphasis of architectural detail
Sealed to IP65
Glasses and attachments can be used in combination for a variety of beam distributions
Surface mounting
Large base houses control gear
Electronic gear in 20W version
Choice of reflectors, (intensive): 8° (extensive): 18°
|
|
|
|
