|
|
Wide range of wall-washing effects with white- and rich, saturated colours and colour changing effects.
These compact, high-performance LED-based units offer ease and flexibility of installation, operational efficiency and outstanding control. They are sufficiently robust to withstand the demands of a wide range of indoor and outdoor applications and can be controlled by a Philips controller or a DMX512-compatible third-party controller.
The ColorBlast 12 Powercore offers high performance, operational efficiency and simplified ...
|
|
ColorGraze and eWGraze Powercore – linear, white and colour-changing LED surface light for wall washing and grazing.
ColorGraze and eWGraze Powercore is a linear product optimised for surface grazing, wall-wash lighting and efficient signage illumination. Featuring Powercore technology, ColorGraze and eWGraze Powercore processes power directly from line voltage, dramatically simplifying installation.
Superior beam quality offers uniform beam saturation as close as 152 mm, and a compact, low-profile design combined with flexible mounting options allows for discreet placement within wide-ranging architectural applications.
|
|
|
|
|
|
|
DANUBE FC is a professional use LED colour changer for exterior and interior architectural applications that features 36 super flux and high luminance 3W full colour LEDs. This incredibly powerful performance is delivered from a remarkably compact unit and the electronic colour mixing offers superb output with real uniform colour coverage. Two versions are available, one with an IP66 weather protection factor for virtually any exterior application, and the other with an IP20 rating, for indoor use. The interior version has completely silent operation and so is suitable for theatre or television use, but of course would be an ideal light source in many applications such as retail environments. DANUBE FC's environmental impact is really small with no ultraviolet radiation and infrared emanation, an exceptionally low power consumption and a drastically reduced maintenance requirement, where the life of the light source is remarkably extended compared with any other conventional lighting equipment and no lamp replacement is requested. Making installation equally straightforward, DANUBE FC has integral power supply unit and on board control, with selectable colour sequences for stand-alone operation, and master/slave function to operate multiple units in synchro without any additional software requirement. However, DANUBE FC, can also be controlled from any standard DMX512 digital controller. A choice of various beam angle optics is available.
|
|
|
IP66-rated, the Wall Washer Shield XB-36 is the optimal high brightness fixture for all outdoor large scale installations in areas with demanding climates. Unlike conventional products, the Wall Washer Shield XB-36 is extremely resistant against strong water jets and temperature variations. The highly reliable heat dissipation mechanism ensures an improved operating temperature range from -20°C up to 60°C, leading to higher stability and longer LED lifetime. A built-in heat sensor provides additional thermal safety, which will automatically reduce the light output if the temperature limit is exceeded. Outstanding design and new technology provide users high flexibility to choose different color combinations: RGB, monochrome or any other customized color. A wide range of available optics ensures amazing colorful illumination of even the largest and most demanding outdoor surfaces.
|
|
|
|
|
|
|
Fitted with thirty-six 3W full colour LEDs and designed for refined professional use, STROKER is a super flux and high luminance colour changer for exterior and interior use that incorporates state of the art electronic colour mixing and high reliability, meaning powerful, uniform and effective colour rendering and minimal maintenance. Superb output with real uniform colour coverage is provided by the newly conceived elliptical optics that can now capture a greater fraction of light with a higher transmission efficiency. Radical technological progress is coupled with the most severe attention to the practical and ease of use requirement of the show-business professionals: light weight and compact size for extreme manageability, IP65 certified weather protection featuring true year-round use, comfortable set up via the built-in fixing yoke and the optional display plate, onboard dip-switch set for quick DMX addressing and IP65 XLR connectors for trouble-free touring use. The noiseless operation enhanced by the use of magnetic levitation motor fans makes the unit suitable for applications such as theatre, museums, TV studios and movie sets, as well as for live shows, public areas and architectural installations of manifold kinds. STROKER’s environmental impact is really small with no ultraviolet radiation and infrared emanation, an exceptionally low power consumption and a drastically reduced maintenance requirement, where the life of the light source is remarkably extended compared with any other conventional lighting equipment and no lamp replacement is requested.
|
|
|
|
|
|
Wall Washer XB-18 is a stylish, compact high-power LED fixture that generates high brightness single color or color changing light for a rich wall-washing effect. The Wall Washer XB series is rated for both indoor and outdoor use, and is equipped with an extruded natural anodized aluminum finish, which acts as an efficient heat sink for the Luxeon® K2 LEDs. With a wide range of available optics and beam angles, the densely packed high brightness LEDs can be used for highly focused and concentrated light output as well as for a long and wide light spread over increased distances.
A heat sensor within the LED casing provides additional safety by a thermal management system, which will automatically reduce the light output gradually should the optimal working temperature be exceeded - once the operational temperature range is reached, the Wall Washer XB will automatically return to maximum light output. For optimal customization, the LEDs can be connected in any desired combination: RGB, monochrome or any other specified LED combination.
|
|
|
|
|
|
|
GRAPHITE 600 is a weatherproofed 575W colour changer which has been designed for permanent exterior installation. The newly conceived outline provides for a compact and solid housing that blends discretely with any architectural environment. The standard optic group featured produces an electronically adjustable beam between 15° and 20°. In addition, the range of optical combinations gives the ability to narrow the beam aperture down to 10° or increase it up to a wide angle output of 45°. Beam shapers are also available for creative concepts. The subtractive colour changing system that features variable transmission CYM dichroic filters can create a virtually endless variety of colour hues and has been designed for excellent performance on smooth mixing between colour changes. The special effects configuration includes an electronic zoom, a mechanical shutter for instant black out, dimming and strobing facilities for dynamic lighting creations, remote lamp ON/OFF function and digital control of all tasks, including stand alone options and permanent colour selection, with a maximum of six channels of DMX signal. The powerful and reliable performance of the fully equipped GRAPHITE 600 is a breakthrough in the constantly evolving architectural stage.
|
|
Architectural floodlight for illumination of large architectural façades,
enhancing & details, bridges, tower blocks, public monuments
and themed attractions.
Highest available illuminance up to 500ft with 6 different lens options.
Philips Core Technologies used:
Powercore® technology – Power and data combined, eliminating
the need for an external power supply
Chromacore® – An unprecedented means for adding intelligence
to LED illumination devices
Optibin® – Production process that ensures light output and colour consistency
|
|
Our commitment to reliability and performance is enhanced by offering multiple wattage UL listed power supplies and "On Boarc" drivers that also reduce initial and installation costs.
Insight provides with its sustainable designs, a 2 year warranty on all LED lighting products!
|
|
XENO wallwasher
Professional vertical solution
The youngest member in the XENO range (design: Jean-Michel Wilmotte) is the XENO WW wallwasher.
|
|
Imperia T6 Arm provides an intense wash of light for signage, menu boards or vertical surfaces from a surface mounted arm fixture. Available in a choice of arm styles, the Imperia Arm uses the compact, long life T6 ceramic metal halide lamp and is powered from a remote ballast.
Die cast lamp housing with specially designed optics provides intense even wash of light.
Captive lamp housing door allows for hands-free relamping.
Remote ballast only.
Available in over 200 powder coat paint finishes.
UL Listed for Damp or Wet Location.
|
|
The PROJECTOR WAll WASHER RVB with diodes of 0 5 mm (of swell luminosity, uses technology RVB. Possible synchronization grace 6 its controller. The PROJECTOR WAll WASHER RVB can also use any program of piloting DMX. The aluminum structure is completely sealed.
To optimize your luminous effect, you can adjust the nail of position of shocks PROJECTOR.
Available also in low tension.
|
|
The PLUG & PLAY are a rpoduit ready with employment (no programming necessary) with catch sector 230V.
Projector color LED - 230V
- Projection until 6m
- Products of outside - IP 44
- Products available only on order
Advantages
Power
Low electricity consumption
Lightness and facility of installation
Great reliability
Allows the development of work of art, buildings, trees remarkable... with a great simplicity of operation and a great autonomy.
|
|
Wall washer "MoonStone" with LED of power are entirely manufactured out of aluminum.
Two lengths with the catalog: 490MM and 990MM with possibility of to measure.
MoonSone is equipped with LED of power of last generation, privileging a exeptionnel returned colors (IRC 93 in hot white).
In its version RGB, LED of power full color (3 chips green/blue red/in the same LED) are installed for a perfect homogeneity of the colors, and this of the exit of the beam to more than 5 meters.
MoonStone for the interior already available, version seals for September 2009.
|
|
|
18 x 1,2W LED outdoor IP65 colour changer with RGB system, driveable with DMX 512-A signal. 5 DMX channels, strobe and rainbow effects at adjustable speed.
|
|
|
PABLITO PM : picture light made of extruded aluminium. Reflector diameter: 2.9 cm. Finishes: gold plated, chrome, lacquered matt gold. The ballast is housed within the rectangular back base.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
