|
|
|
|
|
|
Versatile and adaptable
Track-mounted VIVO spotlights
VIVO S
VIVO M
VIVO L
Three different sized models, designed for innovative light sources and a variety of accessories, make VIVO a highly flexible spotlight system.
VIVO S
• ideal for smaller shops and boutiques with relatively low ceilings
• blends unobtrusively into interio because of compact design
• fitted with the new, ultra-compact CDM-Tm 20 W metal halide lamp by Philips (equivalent to light output of a 75 W low-voltage tungsten-halogen lamp) or with QR-CB 50 W low-voltage tungsten-halogen lamp
VIVO M
• perfect for standard applications in shop windows, retail areas, showrooms etc.
• combining spotlights with flood and spot reflectors ensures highly attractive, accentuated shop window presentation
• fitted with HIT-TC-CE G8.5 35 W or 70 W metal halide lamp or with QT12 100 W low-voltage tungsten-halogen lamp
VIVO L
• model for applications requiring large quantities of light, e.g. rooms with high ceilings, and areas where high illuminance levels are required - i.e. in shopping centres, car dealerships, department stores, supermarkets
• fitted with HIT-CE G12 70 W or 150 W metal halide lamp or with HST GX12 50 W or 100 W high-pressure sodium discharge lamp
• ideally suited for illuminating foods by using special filters and reflectors
|
|
|
wall, ceiling or track spotlight made of brass with sandblasted, weathered brass or matt chrome finish equipped with telescopic arm and adjustable reflector. wired for 12V halogen lamps with aluminium reflector, it is supplied with a 105W 240/12V IMQ CE transformer and dimmer only for pro parete. uv filter, anti-glare ring and safety flood glass can be installed. pro track version is supplied with adapter for 12V tracks and with adapter with transformer for 240/12V tracks.
|
|
An handy joint lamp. Low voltage 12V for 24V lamp consisting of two conductor rods diam. 4 mm.
Chrome finish. The rods lenght (max 55 cm) can be adjusted with a clamp made of clear plexiglass.This clamp can be attached to either a round or flat surface to a maximum thickness of 60 mm. 50W max. In wall version you can use an innovative transformer in a transparent case
Ceiling and corner versions.A locking system, self-estinguishing ceiling-rose mode of resin. It allows the installation of the lamp at the ceiling with the possibility to adjust the rods up and down. Unlike the traditional recessed spots, this system allow to direct the light on the object that has to be lit up.
|
|
pro track
mario nanni 1995
Wall, ceiling or track spotlight made of brass with sandblasted, weathered brass or mat chrome finish equipped with telescopic arm and adjustable reflector. Wired for 12 Volt-halogen lamps with aluminium reflector, it is supplied with a 100 W 230/12V IMQ CE transformer and dimmer only for Pro parete. UV filter, anti-glare ring and safety flood glass can be installed. Pro track version is supplied with adapter for 12V tracks and with adapter with transformer for 230/12V tracks.
|
|
|
Lighting fixture for indoor installation. Bungee is made of a transparent technopolymer cable, ceiling mounted. A vertically sliding, polycarbonate ring with steel springs, containing the bulb, allows to choose the light orientation. Electrification on mains voltage for very low voltage (12V) halogen bulb.
|
|
Adam C0
bridge system
Luca Ferretto
Lighting system on cables with mouth-blown, satined borosilicate diffusers, lamp support in chromed metal and details in opal polycarbonate.
Cables lenght 196 7/8" - 393 3/4" - 787 3/8".
|
|
|
Pendant, with track system, wall and ceiling lighting fixtures for indoor installation. Fully adjustable, satin-finish white, blown glass or aluminium diffusers. Polished chromium-plated and grey painted metal structure. Electrification on mains voltage for metal halyde bulb.
|
|
|
The horizontal incandescent or compact fluorescent recessed reflector downlight is available in both 7" and 8" apertures. A wide selection of trim styles are available in a choice of reflector colors and custom paint finishes. Click here for additional horizontal compact flourescents styles.
|
|
|
The horizontal incandescent or compact fluorescent recessed reflector downlight is available in both 7" and 8" apertures. A wide selection of trim styles are available in a choice of reflector colors and custom paint finishes. Click here for additional horizontal compact flourescents styles.
|
|
Dimensions: - 6"Dia. x 8-5/8"H x 11"D
Marine grade corrosion resistant heavy walled high pressure die-cast aluminum housing, fully gasketed, stainless steel hardware, UL listed electrical components.
Lamps: PL: 13Q-32T, INC: 100W, 75W Par30, 90W Par38; HID: 39MH G12, LED: 8-1 watt diodes (8W total), 8-3 watt diodes(24W total)
|
|
|
The Gimbal is a high quality, tilting Low Voltage Halogen downlighter. Manufactured from die cast aluminium, the luminaire is available in a choice of remote or pre-wired to a dimmable branded electronic transformer featuring short, overload and thermal protection. A choice of colours is available.
|
|
|
The Capsule downlighter accepts the Low Voltage Halogen GY6.35 capsule lamp upto 100w and is available as either remote or supplied complete with a pre-wired fully protected dimmable electronic transformer. The narrow beam width makes the Capsule downlighter ideally suited to accent lighting applications.
|
|
|
The clean styling and the precision die cast quality of the Elito 053 subtly integrate the discreetly vented lamp housing, wishbone pivot and ceiling/track mounts. The Elito 053 features a low profile gear housing which can be surface or track mounted and encloses the quality electronics required for the LVH and MHB light sources. Slim vent details and inbuilt heat sinking ensure the reliability and performance of the luminaire is not compromised. The Elito 053 is eminently suited to Retail and Accent lighting environments.
|
|
|
Surface Low Voltage Halogen spot. The Conic combines die cast aluminium and vibrant blue glass. Supplied with or without a pre-wired branded electronic transformer featuring short, thermal and overload protection.
|
|
Dimensions:
10" Dia
Exterior die cast architectural bulkhead.
Marine grade corrosion resistant heavy walled high pressure die cast aluminum construction.
|
|
The Punkt Lamp is used in large halls, shopping centres and similar premises. It is equipped with a flexible ballast for 26 or 32 watts. The standard model is without shade at the bottom and offers an efficiency of 67%. The downlighter can be equipped with a 3 mm bottom shade of sandblown glass. This will reduce the efficiency a little but the combination of sandblowing and clear glass results in a high diffusion degree.
All Punkt Lamps are fully closed according to European standards for lighting equipment.
|
|
OPTIONS :
SUSPENSION SET 2 1,6m
SUSPENSION SET 4 1,6m
CABLE BASE R / S
COVERSET R 62-90-100 / S 62-80-90
DIRECT FIXATION
G53 / 230-240V / 50-60Hz / TE
|
|
ABC policy : A
lamptype : halogen 12V
sockettype : G53
ILCOS code : HMGS G53
ZVEI code : QR-LP 111
number of lamps : 4
wattage (W) : 50
light diffusion : direct
input voltage : 230V
gear : int. Transformer
dimmable : leading/trailing
adjustability : gimble 45°
installment : surface
mounting : wand/plafond
dimensions (mm) : L350/B350/H130
weight (kg) : 7 3
class : I
application : Interior lighting
standard : CE
F-standard : yes
safety distance : 1.0 m
|
|
|
ASD have extended our range of display lighting with the inclusion of a new IP65 MR16 low voltage shower light. The attractive and neat design has toughed glass and screw bezel facia which eases installation, lamp replacement and maintenance.
|
|
OPTIONS :
PLASTERKIT 101
BALLASTSET C50
ADJUSTABLE 0°- 20°
GX10 / 230-240V / 50-60Hz / EXCL.EVG...
|
|
The Luideo recessed pull down adjustable is compact and architecturally styled to fit most interior design schemes. Its specially designed reflectors combined with a choice of a clear or a frosted lens offers you a choice of beam accent lighting distributions from spot to wide flood. The Luideo offers all the aiming flexibility of a track fixture with a less obtrusive look due to the ballast being recessed above the ceiling. Its unique elbow construction pulls down out of the ceiling to help project light on graphics and displays higher up the wall.
Compact architectural style fits most interior design schemes.
Die-cast aluminum lamp housing allows for precise optical alignment of lamp, reflector and lens for improved lighting performance and consistency between fixtures.
Choice of high performance optics provide a range of beam spreads including spot, narrow flood, flood and wide flood.
45 degree tilt and 358 degree rotation allows for desired aiming angle.
|
|
PROJECTOR IN PAINTED DIE CAST ALUMINIUM AVAILABLE WITH DIFFERENT ADJUSTABLE LIGHT SOURCES, 45° ADJUSTABLE SPOTLIGHTS.
TRACK OR WALL MOUNT BOTH WITH 90° ADJUSTABLE ANGLE.
|
|
|
SYSTEM OF LIGHTING APPLIANCES WITH ADJUSTABLE SPOTLIGHTS CONSISTING OF ADJUSTABLE SPHERES 45° THAT CAN BE POINTED INDEPENDENTLY IN ALL DIRECTIONS.
|
|
OPTIONS :
COVERSET R 90-100
ACCESOIRES :
CONE 50
RING 66 + COLOUR FILTER 66
RING 66 + CONE 66
FLAP 5
|
|
The Multiple Semi-Recessed Adjustable fixture is excellent for retail and commercial accent and display lighting. Each head can be aimed according to your displays, giving you flexibility equal to track lighting with a less conspicuous look and reduces clutter on the ceiling. Avialable with low wattage CDM-Tm Mini MasterColor, T4 ceramic metal halide or PAR20 metal halide lamps. Specially designed optics (for CDM-Tm & T4 only) provide just the right amount of light for your needs.
Family of semi-recessed luminaires provide aiming flexibility equal to track lighting with a less conspicuous look and reduces ceiling clutter.
Die-cast aluminum lamp housings provide proper alignment of lamp reflector and lens for consistent performance.
Choice of 1, 2 and 3 light configurations.
Provides 358 degree rotation and 70 degree lockable tilt.
Choice of custom tints that warm standard 3000K ceramic metal halide to incandescent hues (CDM-Tm & T4 only).
|
|
available colours :
colour : ALU GREY 202 20 01 A
colour : WHITE 202 20 01 W
fixation: CEILING - WALL RECESSED MOUNTED
light: DIRECT
lamptype :
lamp : 1 x QR-CB51 - GX5.3 - 50 W (max)
voltage : 12V
control gear : EXCL.TRANSFO
class: III
protection class: IP20
norm: CE - CEBEC
glowtest: 850°C
distance: 0,5 m
|
|
description : Asy Lotis MR16
article nr :
10880505
10880502
10880526
10880509
colour :
alu
black
dark chrome
matt white
lamp : 1x QR-CBC 51 Gu 5.3 50W
|
|
Catalog #:IM8
Description:Mini Puck Light w/ Cone Frosted Glass
Lamp:12V 20W JC Lamp
Listings:NRTL
|
|
Catalog #: IV3R
Description: 3" Low Voltage Non-IC Remodel Recessed Housing
Lamp: MR16 12V 50W max.
Ballast: Magnetic Class H 50W max. 120/277V
Electronic: 50W max. 120/277V
Listings: NRTL
|
|
Mirrors & Lights
Falper Design
The floor or suspended lights and the halogen spots are a synthesis of innovative projects, which show a great attention to design, top-of-the-range quality and logical thought. They are important lights, which can freely be
used with any collection and which convey a touch of simple elegance to the bathroom. Designed by Falper and Paola Navone, they can be freely used in any part of the house.
|
|
|
|
