|
|
Description:
60mm diameter beacon for flush-mount adjustment consisting of a stainless-steel square or round trim and a tempered-glass circular diffuser. Lights up with LEDs and it has accessories available for non-mains use (PBL units) or at low safety voltage (TL transformer). Particularly suitable for signalling in damp environments.
Characteristics:
Format: AQUA
Operation: Luminaire
Voltage: 230 V 50Hz, 24 V AC/DC
Mains lamp: Amber, white, red and blue LED
Emergency lamp: -
Degree of protection: IP66 - IK07
Autonomy (h): It depends on the power suppy unit*
Electrical insulation: Type II, Type III
|
|
Description:
20mm diameter flat-fitting unit comprising a round stainless steel embellisher and a circular polycarbonate transparent diffuser that picks up the LED colour. It includes accessories to enable operation only when connected to the mains power supply (TL safety transformer) or with the mains power on or off (PBL equipment).
Characteristics:
Format: LEDA
Operation: Luminaire
Voltage: 24 V AC/DC
Autonomy (h): it depends on the power supply unit *
Mains lamp: Amber, white, red and blue LED
Degree of protection: IP64 IK07
Electrical insulation: Type III
|
|
Description:
6mm diameter flat-fitting unit comprising a cylindrical stainless steel body and a polycarbonate opal or transparent diffuser that picks up the LED colour. It includes accessories to enable operation only when connected to the mains power supply (TL safety transformer) or with the mains power on or off (PBL equipment).
Characteristics:
Format: CLAVO
Operation: Luminaire
Voltage: 24V AC/DC
Autonomy: It depends on the power supply unit*
Mains lamp: Amber, white, red and blue LED
Degree of protection: IP64 IK07
Electrical insulation: Type III
|
|
MINI and NIQ leds projectors to be embedded. They incorporate high intensity LUXEON K2 Leds, so the luminance power is assured.
They are valid projectors for indoor and outdoor uses, but its safety class IP68, makes ideals for outer architectonic illumination and aquatic illumination of sources or spaces. These lights incorporate a high resistance glass that makes suitable for zones where there is circulation of people (walks, gardens, public facades, dancing sources in whom it is walked above, parks of game for children,…)
|
|
LED Linear Light Type AT753-C
With the new linear light AT753-C, our expectations for best usage of energy and absolute light quality are met.
Economical
Its form makes the linear light especially adept to replace common fluorescent lights economically.
Deliberate
Specialities and advantages of linear light AT753-C are extremely robust case, waterproof, heat resistant and maintenance free. Optional: explosive protected.
|
|
|
(type 5). This innovative and compact light box (patented) is an ideal solution to create decorative lighting effects, for interior or exterior applications and for applications where vol have some problems < dimensions for light box or noise Only on request, you can have different led colours
|
|
Block of lighting of environment or anti-panic with LED with
transparent or frosted window conceived to ensure one
uniform lighting in the event of breakdown sector. The part
luminous - 6 LED of power - is placed in a box
out of tack welded aluminum of rectangular section
closed at the two ends. Lighting especially
conceived for an integration in spaces claiming
a certain esthetism.
Completion adapted to interior architecture.
Advantages of the LED: longevity (up to 50.000 hours);
low fuel consumption; resistance to the vibrations.
|
|
Luminous bar with LED conceived to trace lines
luminous continuous in any rigid form of mediums.
The bar is equipped with 240LED/m moulded in one
profile of embedding out of aluminum anodized with one
very low thickness. It is fed in low tension of
security (48V), which returns it adapted particularly to
the installation in the public places. Colors of the LED:
cold white (HW) or white heat (HE).
- Low thickness (18mm). Length on request
(until 2m). Possibility of aligning several bars
in order to create continuous luminous lines.
- Electronics components moulded and thus protected
moisture and shocks.
- Advantages of the LED: remarkable longevity (according to
color up to 100.000 hours); low fuel consumption;
resistance to the vibrations)
|
|
The MRI Luminous SkyCeiling expands the confined atmosphere of the MRI suite into a comfortable healing environment. Combining the proven effect of natural imagery with the therapeutic quality of bright RFfreeLux™ LED lighting, the MRI Luminous SkyCeiling produces a compelling experience of the sky's vast openness and vitality – calming patients during the radiological procedure.
SkyCeilings™ (virtual skylights) are architectural illusions of the sky that deliver an authentic experience of nature. Our SkyCeilings elicit genuine psycho-physiological relaxation responses in the observer and transform enclosed spaces into beautiful, daylight-filled environments of refreshing vitality. Additionally, these design solutions are also known to increase productivity, reduced fatigue and result in higher employee satisfaction in a work environment. Luminous SkyCeilings (back-lit) consist of translucent panels, a choice of our energy efficient LED or fluorescent "daylight-balanced" lighting systems, and our patent-pending 'elevator system' that gives the ceiling grid a three-dimensional appearance.
|
|
|
The Extremeline RGB series is a powerful full RGB color projector system in a low profile (3.1" H 1.4") linear LED strip that combines industry leading LEDs with ultra high performance optics spaced to maximize illumination power while producing exceptionally tight beam control without striations.
|
|
|
The Extremeline 100 series is a powerful projector system in a low profile (3.1" H 1.4") linear LED strip that combines industry leading LEDs with ultra high performance optics spaced to maximize illumination power while producing exceptionally tight beam control without striations.
|
|
|
The Slimline series is an extremely slim profile (1.4" H 1/2") linear LED strip that delivers industry leading LEDs optimally spaced to produce uniform surface illuminations. The series includes a wide selection of mounting optics to suit any installation.
|
|
|
The Baseline series is a slim profile (1.7" H 0.9") linear LED strip that combines industry leading LEDs with high performance reflector optics to generate intense beam patterns for a wide range of outdoor and indoor flood and wash applications.
|
|
|
The Colourline is a full RGB color LED linear bar (1.4" H 1.9") that combines industry leading LEDs with a cylindrical lensed housing to optimize color mixing for direct view and close proximity surface and backlighting applications. Through the use of SMD multi-chip RGB LED technology rather than individual R-G-B LEDs, insures maximum uniformity of light output.
|
|
The PLUG & PLAY are a product ready with employment (no programmatio necessary) with catch sector 230V.
Tubes color LED - 24V
- Length 1m
- Products of outside - IP 44
- Products available only on order
Advantages
Very low tension (24v)
Power
Low electricity consumption
Lightness and facility of installation
Great reliability
|
|
The Avant lights is characterised by the most comprehensive Lamp range of lamp varieties, sizes, finishes and technical accessories. Minimalist, with stylised proportions it fits perfectly into any architectural atmosphere. There are four very different sizes of models, with two possible finishes, two-tone light/dark grey or matt white. All of these models are available with halogen, metal halide and LED lamps.
This range of lights can be used in places such as shops, museums and galleries since it has technical accessories like refractors, anti-glare grills and colour filters that enable high technical performance levels.
|
|
Spot LED - small delight
Featuring an innovative light emitting diode, the Spot LED is a real revolution in accent lighting. With an adjustable projector head of only Ø 31mm, this is an incredibly small luminaire.
It incorporates the LUXEON® K2 high power LED, which delivers more light than ever before and has no UV/IR radiation. Spot LED is available as a complete range - surface mounted, recessed, track mounted and wall mounted.
|
|
| ... products without information |
| |
|
(type 5). This innovative and compact light box (patented) is an ideal solution to create decorative lighting effects, for interior or exterior applications and for applications where vol have some problems < dimensions for light box or noise Only on request, you can have different led colours
|
|
Li13105 (24 V pushbuttons)
Li13205 (24 V + LED pushbuttons)
Li13305 (250 V pushbuttons)
Li13405 (250 V mech. switches)
24 V pushbuttons: Max. 25 mA
250 V pushbuttons: Max. 1 A
250 V mech. switches: Max. 10 A
Accessories: Plaster kit
Parts included: coverplate, frame, mounting frame, button, hook. Optional parts: 24V pushbuttons + LED: connector, spacer, LED | 250V pushbuttons: protection frame, connection clamps | 250V mech. switches: protection frame, quick-connect clamps
NEW : SWITCH WITH GOLDEN FINISH (possibility to integrate a diamond)
see : www.noblebylithoss.com
|
|
|
Relaxed with a book, cosy in your favourite armchair. A dinner with friends under dimmed lights. With Niko, you always find the perfect solution that meets your demands. At Niko, comfort is a word that lives.
|
|
With the new Berker TS sensor you experience scolded again. It is enough a gentle finger pressure on its glass surface, in order to serve light, venetian blinds, roll shops and much more besides. Thus becomes the sensory scolded a haptischen experience of the special art.
Differently than other logic elements the Berker TS sensor is reduced to an almost wind-concise surface, which is interrupted by no relief, no collection or mobile parts. Thus the switch always convinces by a puristic appearance and is optically an absolute highlight.
By the reduction on the substantial it integrates itself easy in fastidious apartment and object Design.
|
|
With Berker B.IQ we make the operation of your intelligent house still easier for you. Up to four operation elements of in taboo EIB can be combined in a control unit: Temperature regulators, info. display, palpation sensor and time switch clock light scenes and further applications are simple and without software actually changing desires adaptable - so easy that it can everyone. In addition intelligent details e.g. come like the transparent inscription label strip, which can be completely simply removed after an acclimatizing phase. Or the laterally attached status LEDs, which indicate the active in each case functions. Or also the display, which communicates with you in plain language.
Available surfaces: High-grade steel brushed, glass, polar-white
|
|
... see all the products in the category
Switches
|
|
|
see the results for the following category
