|
|
design Co Twee for Dark
Initially, the 12-25’ is a lamp for walls and ceilings, which can rotate via a built in magnet to all directions. This way the lamp can even rotate 360° (an absolute world premiere) you can light every corner in a room, each time from a different angle. The 12-25’ is standard available in glossy white, glossy black and chrome. On request available in all RAL colors.
The light has been expanded with 2 versions: the famous little ball is available as a built-in and an built-on version, in groups of 2 and/or 3.
Types : Suspension – wall –ceiling - table – set 2 – set 3
Measurements : Ø 160mm - 2,5kg /piece
Lamp possibilities : Halopar-20 50W - QR 111 - CDM R 35W
Available colors : white – black - chrome
|
|
Ray design Afra e Tobia Scarpa
Ray, specifically designed to correctly illuminate works of art. The lighting project for the exhibition of the Carlo Crivelli poliptych at the Academia Galleries of Venice was the “field test” in wich Ray proved to be particularly suitable thanks to its essential and non invasive design. Ray is available with one to eight lights in the wall, ceiling, pendant, track and floor versions, and it can also be applied in commercial and office spaces, in operative or executive rooms and to highlight architecture.
Technical characteristics
- An extrude aluminium electrified bar wich is ancore to an adjustable glass plate by means of two coaxial joints. The plate can house between one and four swinging and rotating lights
- Precision training and adjustment with respect to the surface. Protection glass and tinted filters available
- Wide light beam training adjustment flexibility, even independently: 360° vertically, 45° of the glass plate with respect to the base
|
|
Lamp: QR-CB51 20-35-50W
Lamp type : halogen
Lamp base : GU5,3
Light distribution: down
Power supply : 12V
Degree of protection: III
Ip rating : IP20
Material: Aluminium
Glowtest: yes
Standard: EN60589-1
Fixation: ceiling
Mounting: semi recessed
Weight: 0,85 kg
|
|
Die cast aluminum wall mount cylinder.
Marine grade corrosion resistant heavy walled housing and lens frame, high pressure die cast aluminum construction. Die cast looking swivel, tilts 45 degrees.
|
|
Halogen spotlight in thermoplastic material with clear glass.
TRANSFORMER
- Flat 16
- Mignon
- TVB
- Flat
- Set 210
- Set 60 IP44
|
|
Halogen spotlight made in die-cast aluminium and glass.
Halogen spotlight made in die-cast aluminium and glass.
TRANSFORMER
- Flat 16
- Mignon
- TVB
- Flat
- Set 210
- Set 60 IP44
|
|
Max 50W, metal recessed dichroic halogen spotlight IP55.
Max 50W, metal recessed dichroic halogen spotlight IP55.
TRANSFORMER
- Flat 16
- Mignon
- TVB
- Flat
- Set 210
- Set 60 IP44
|
|
Completely adjustable multi-lamp fixtures. The Wipp range is created with exactly the same great installation flexibility and use as the Witra series of products, characterised by a double aluminium ring to support the light source. The glazed grey finish of all the parts of the product contribute to increasing still further the lightweight characteristics from an architectural point of view, which makes it suitable for almost all applications.
Light Sources:
Light Source Metal halide (PAR30 MH) with socket E27 (35-70W).
Light Source Reflector Halogen (AR111) with socket G53 (100-50-75W).
Emissions:Direct
Power supply:
According to the models, 12V control gears or directly with 230V mains voltage using an electronic transformer housed in the product. All versions with integrated transformer can be dimmered directly on the primary circuit by using a trailing edge dimmer (IGBT technology). For models with metal halide lamps, the control gears have to be ordered separately.
Body:
The lamp support consists of a double aluminium ring for gyro adjustment. In the recessed versions, the parts of the body are in steel plate. Joints and forks are made in die-cast aluminium.
NOTE: Each fixture in the Witra Range can be transformed into Wipp on request; please refer to the Witra Range. Martini S.p.A. is willing to receive orders for non standard fixtures of the Wipp Range based on an accurate evaluation of the quantities required.
Colours:
Glazed grey.
Accessories:
Kit with safety glass.
|
|
Totally adjustable multi-lamp fixtures. Decorative rings available in various colours. Essential design and technology are the elements that have gone to create the new range of Miniwitra fixtures. The unobtrusive design fits in well in all enviroments without altering the architectural harmony.
Light Sources:
Light Source Reflector Halogen (AR70) with socket BA15d (20-50W).
Emissions:Direct
Power supply:
12V control gears voltage using an electronic transformer housed in the product. All versions with integrated transformer can be dimmered directly on the primary circuit by using a trailing edge dimmer (IGBT technology).
Body:
The lamp support consists of a glass ring for gyro adjustment. Joints and forks are made in die-cast aluminium.
Colours:
Body glazed grey. Available with rings acid-treated white, aquamarine green, crystal, opal blue.
|
|
|
A completely adjustable fixture. Minimal design. Different lamp types. Designing space with light, guiding and controlling the beam of light inside each room has become an aspect of paramount importance in fitting out show-rooms, shops, hotels and other public premises. The complete adjustability of this fixture that helps us keep energy consumption down and avoids wasting the diffusion of the light, is achieved thanks to a flexible movement of the fixture on the two axes (vertical and horizontal). The extremely rigorous design of the die-cast body, the super pure aluminium optics, the use of ceramic glass, the possibility of choosing out of 4 different types of lamp and the extreme ease with which it is installed are the fundamental features of the Krono series: a direct expression of Martini quality and research.
|
|
The OPTIMAL rigid stem light puts into practice the concept of charge of elements. All OPTIMAL metal reflectors can be used. The head has a adjustability of 160º. For use with bi-pin lamps.
|
|
The PET rigid stem light was developed for the B15d lamp and the special reflector lamps. Clean and simple design. The lamp is secured against unintentional disconnection.
Same design as PET however the stem length is only 50mm/2”
When using plug-in lights of a length of less than 100mm/4” in combination with surface-mount transformers please use reflector lamps with an aluminum coating. The heat from these lamps is directed forward, away from the fitting.
|
|
|
A light series developed for professional use. Timeless design with many possibilities: colored lenses, UV filters, louvers etc. Sophisticated metal housing. For use with alutec MR16 lamps (no cool beam).
|
|
|
FIAMMA: projectors for halogen, dichroic and discharge lamps. Precision and adjustability. Possibility of 355° horizontal rotation and 90° vertical rotation, thanks the aiming self-locking system. Professional optics subjected to pure aluminium reflective treatment provide clean and precise beams. Efficiency. The electrical component are separate from the optic unit to optimize heat dispersion, ensuring the lamps maintaining a constant operating temperature. The bayonet system on the whole Fiamma range makes it extremely easy to install and replace lamps, without the need for tools. The possibility of inserting chromatic, UV and corrective filters on the front, or universal chromatic and refractive filters for QR-LP 111 directly on the lamp, offer maximum freedom of expression and design.
|
|
|
PROJECTEUR COVE: projectors for HIT-CE lamps. Mounting of joint in upper position for indirect lighting. Mounting of joint in frontal position for direct lighting. 359° horizontal rotation, +/- 90° vertical inclination.
|
|
The Avant lights is characterised by the most comprehensive Lamp range of lamp varieties, sizes, finishes and technical accessories. Minimalist, with stylised proportions it fits perfectly into any architectural atmosphere. There are four very different sizes of models, with two possible finishes, two-tone light/dark grey or matt white. All of these models are available with halogen, metal halide and LED lamps.
This range of lights can be used in places such as shops, museums and galleries since it has technical accessories like refractors, anti-glare grills and colour filters that enable high technical performance levels.
|
|
Recessed downlight in thermoplastic material with 1 LED.
|
|
Delicate and small built-in and surface-mounted spots with great lighting power, designed for the OSRAM MiniStar reflector lamp with bi-pin socket or alternatively fitted with a latest generation 1W power LED.
All metal parts are turned and milled of solid brass or aluminium, and are available in two finishes: satin-nickel or glossy nickel. In the surface-mounted models, the transformer or the LED driver is built into the base. The joints can be swivelled and rotated.
|
|
Lightnig Classic-Line 12V
Downlights, Spotlight, Star light
Advantages:
Low voltage halogen lighting system
Light effect: brilliant, white halogen light with very good colour reproduction
Light output: very high (1,800 cd)
Service life of bulb: 2,500 hours
Safe and easy installation with screw-retaining device and ultra-flat specialty transformers
Installation height: 34mm
|
|
TUB 6123
Recess mounted ceiling lamp. Injected aluminium base for mounting, finished in bright chrome. U-shaped injected aluminium support, finished in bright chrome, with transparent glass tube containing main body of lamp (uses GY6.35 bulb holder for 50 W low voltage bulbs). Light beam may be swivelled 300° on base axis and 120° at the head, giving great flexibility for lighting any point round the lamp. A track-mounted version is also available, and a surface mounted version with one or two lights.
|
|
DAU SPOT 6028
Wall mounted lamp with injected aluminium baseboard and extruded aluminium body. Polymer injected base for mounting. Uses GU10 bulb holder for 75 W bulbs. Light beam can be adjusted in two directions: 300° rotation from base axis and 90° tilting of head. Made in brushed satin aluminium. This lamp is part of an extensive range, which includes ceiling lamps, track lights, table lamps and floor lamps.
|
|
The Multiple Semi-Recessed Adjustable fixture is excellent for retail and commercial accent and display lighting. Each head can be aimed according to your displays, giving you flexibility equal to track lighting with a less conspicuous look and reduces clutter on the ceiling. Avialable with low wattage CDM-Tm Mini MasterColor, T4 ceramic metal halide or PAR20 metal halide lamps. Specially designed optics (for CDM-Tm & T4 only) provide just the right amount of light for your needs.
Family of semi-recessed luminaires provide aiming flexibility equal to track lighting with a less conspicuous look and reduces ceiling clutter.
Die-cast aluminum lamp housings provide proper alignment of lamp reflector and lens for consistent performance.
Choice of 1, 2 and 3 light configurations.
Provides 358 degree rotation and 70 degree lockable tilt.
Choice of custom tints that warm standard 3000K ceramic metal halide to incandescent hues (CDM-Tm & T4 only).
|
|
2525
H. cm.13 - S. cm. 12 - L. cm. 60
3xDicroica HI-SPOT 50W/220V (GU 10)
senza trasformatore.
Adjustable wall lamp, 3 lights.
|
|
Alaska Triple Square
Part Number:
01019 Alaska Triple square
Gross weight:1.9 Kg Front View
Outer carton quantity: 8
|
|
Catalog #:ITH96
Description:Aria H.I.D Metal Halide Track
Lamp:GE CMH 20W GU6.5 Base
Options:120V ProSeries, 277V ProSeries, Glare Control
|
|
ABC policy : A
lamptype : discharge
sockettype : G12
ILCOS code : MT G12
ZVEI code : HIT-CE
number of lamps : 1
wattage (W) : 70
light diffusion : direct
input voltage : 230V
gear : int. Gear
dimmable : niet dimbaar
installment : surface
mounting : wand/plafond
dimensions (mm) : ¯150/L360
weight (kg) : 2 9
class : I
application : Interior lighting
standard : CE
F-standard : yes
safety distance : 0.7 m
|
|
NEW PRODUCT 2007/2008
LED Spot light for bed side.
To be inserted into a wood panel.
Delivered with a 3 Watts (equivalent 40 W) LEDlight white warm light (3000° K).
Narrow beam to allow confortable reading .
For bed side use.
Price quoted for 1 spotlight with one miniature (15mmx30mmx45mm) electronic transformer.
50 000 hours.
Available from October 2007 in a black and nickel bright finish with or without switch.
Please note: To be fixed into a wooden panel.
|
|
When you need reliable, durable lighting for industrial applications, EFO has the solution and more. Not only do we offer the quality and intensity you desire, our fixtures are energy efficient to boot. Our recommended industrial fixtures have passed military shock and vibrations test and with a 50,000 hour LED life, you’ll never be caught in the dark.
The powerful LED Dock Light shines into even the darkest corners. Driver is build in.
|
|
|
Luminy 1 and 2 - Small outdoor accentuation LED Proyectors - 1W or 3W, all LED colours available, great choice of collimators for various light beams opening, easy to install. IP68 for underwater applications
|
|
LED Assembling Module Type AT951
The LED Assembling Module Type AT951 was customised to meet individual illumination conveniences.
Versatile
LEDworx® assembling spotlights are part of a building kit of different modules that can be fit together user-defined or can be customised as separate LED-spot for individual illumination settings. This makes our LED-modules not merely an illumination device, but also tool for personalised and creative living.
Aesthetic
The LED spots are available in black or white colours and are produced from reusable synthetic material. Cover and lens optics are manufactured from UV-resistant polycarbonates.
|
|
|
|
