|
|
Functional and aesthetic design are the characteristics of the TIL lighting series. This product features a newly developed, asymmetrical reflector system. Internal light shield available upon request.
TIL is a winner of the International iF Design Award 2005
|
|
|
A linear wall lighting system featuring direct/indirect light output. HPL composite ultra slim profile (6mm) with decorative parallel lines in translucent polycarbonate. Twin asymmetric polycarbonate diffusers control light distribution and guarantee IP40 protection. Control gear mounted within extruded aluminium upper body which allows continuous light distribution. Control gear options: Non-dimmable electronic, dimmable analogue or dimmable digital. Accessories: Shorter modules retaining emergency lighting systems.
|
|
|
Wall-mounted luminaire SCALA, for 2 x compact lamp 55W with lampholder 2G11, indirect emission, cover in dessinal sheet metal, anodised, silver-coloured bracket and front sides, high-intensity reflector, protection degree IP20, with 1 x high frequency twin-ballast, B = 592mm, H = 75mm, A = 277mm
|
|
Mirage design DIL
Aluminium appliance, with special attention paid to details. Asymmetrical light emission, giving indirect or two-way emission. It uses linear or compact fluorescent light sources with traditional or electronic power supply units. The profile is completed by the possibility of having continuous rows or ceiling or wall cornices.
Applications
- Wall
- Wall with cable
- Wall mounting
- Possibility of having continuous rows or cornices
Construction features
- Body: estrude aluminium
- Plugs: die-cast aluminium
- Reflectors: 99.85% specular aluminium
Dimensions
- Section 267 mm x 67 mm
- Lenght from 300 mm to 3220 mm
|
|
Complete range of luminaires for all lighting applications with free standing, desk mounted, screen mounted, suspended and wall mounted luminaires.
Entirely new lighting technology with innovative double-segment reflector design (DSR) .
Very high efficiency.
Absolutely glare-free (in accordance with national and international regulations on health and safety at work).
Low power consumption.
Highly convenient maintenance. Luminaire can be cleaned easily and without the need for tools.
|
|
TYCOON DYD 228
Complete range of luminaires for lighting applications with free standing, desk mounted, wall mounted and ceiling mounted luminaires.
- Innovative lighting technology with CPS (Coin Prismatic Structure).
- Suitable for ceiling heights less than 2.40 m.
- Additional ceiling brightening feature.
- Horizontal and vertical application possible.
- Low power consumption.
|
|
|
The Geneva 421 is a stylish extruded aluminium wall light with energy efficient light sources and a high quality etched glass light spill feature. The luminaire is particularly suited to office lighting requirements. Complimentary Free Standing and Pendant luminaires are shown in the relevant section.
|
|
- Procyon Wall is the perfect complement to the Procyon I or II pendant-mounted luminaire.
- Contoured die-cast aluminum ends accentuate Procyon's shallow, sleek profile.
- 4-ft. and 8-ft. housings are available in one or two T5 or T5HO lamp configurations.
|
|
- Conforms to A.D.A. (Americans with Disabilities Act) requirements.
- Die-cast aluminum ends and extruded rails assure clean, crisp detailing.
- Available with emergency battery pack.
|
|
- Baffles are an integral part of the fixture housing provided in either "up" (internal) or "down" (external) configurations.
- Compact 4" X 4" profile conforms with A.D.A. (Americans with Disabilities Act) requirements.
- Available with one-lamp or two-lamp T8 or T5 configurations.
|
|
- Featuring a shallow 2" profile in precision extruded aluminum; 3 3/4" depth complies with A.D.A. (Americans with Disabilities Act) requirements.
- The Focus 58 Wall is the perfect complement to the Focus 58 pendant series.
- Ends are available as quarter-round.
- Available in one-lamp T5 or T8 configurations.
|
|
Galicea: From power of indirect white to the soft colour of wall washer. Marc Alessandri.
4 colours: black / metallized grey / bronze / white
4 screen colours: opale / red / yellow / blue
|
|
|
HALL: indirect light wall mounted luminaire for metal halide lamps.
|
|
Hi-power Downlight for Jewelry and Showcase
It creates spectacular visual, boost the beauty and color for jewelry pieces and luxury commodities with maxminum glitter.
Model no. AL-SPOT-LED-5X1AC
Dimension: Ö157.5 x H. 32mm
Cut out: Ö152mm
Light source: 5x1W hi-power LED
Current: 350mA
Color temp: 3000K, 4000K, 6300K
Casing: Aluminum
Remark: 4 movable heads, 1 accent spot
|
|
10258 GZ
Wall lamp with aluminum structure in spiral form painted in grey. With two lights on the upper side and two on the lower part.
|
|
|
Wall luminaires available in three sizes. Body in painted metal. Diffuser in painted. Available in white or grey. Sources: 230/240 V halogen lamps. Metal halide lamps. Compact fluorescent lamps. Emissions: Indirect asymmetrical (Titles 40)
|
|
WALL LAMP FOR METAL HALIDES LAMPS RX7S WITH ASYMETRIC PARABOLA.
POSSIBILITY OF EMERGENCY LIGHT FACILITY INCLUDED
|
|
|
|
|
|
METER BY METER
Design: Matteo Thun
METER BY METER is a lighting system and is employed in the field of architecture as light by the meter. It can be positioned on walls, ceilings, in corners, to frame doors, passages etc. or even to highlight lettering. It can also be used optionally as a source of indirect light with an anodized aluminum cover, or as direct light with a satinized, transparent, art glass cover. Furthermore, direct and indirect lighting sections can be combined. METER BY METER adapts on site to every situation and opens up completely new dimensions in the handling of light in architecture. There are hardly any limits to the application possibilities of METER BY METER. Allows you to use your own creativity and ideas. This light system is based on the new T5 technology of energy-saving fluorescent lamps. The light strips are cut by BELUX as required and matched to the premises. The fluorescent lamps can be interconnected by means of a simple plug connection principle. METER BY METER projects can be planned by BELUX with their own specifically developed software. METER BY METER can be equiped with Movement detector.
|
|
O-LITE
Design: Jehs+Laub
The O-LITE wall/ceiling lamp consists of several layered dispersing diffusing and light-directing shells, emitting a brilliant, widely-diffused light with reduced glare. O-LITE can be used indoors and outdoors (IP54). The casing of O-LITE is made of plexiglass and polycarbonate and is prepared for through-cable installation.
|
|
FLAT
Design: Greutmann Bolzern
FLAT conforms to the EU standard requirements for 65° anti-glare lighting, and has a light operating efficiency of more than 80%. It is thus possible to reduce the number of lamps considerably by spacing them wider apart. In addition, the lamps can be arranged across or along the line of vision, allowing architects considerably more freedom.
|
|
available colour: ALU ANODISED 275 01 01 ANO
fixation: WALL
light: DIRECT + INDIRECT
lamptype :
lamp : 1 x QT-DE12 - R7s - 150 W (max)
voltage : 230-240V / 50-60Hz
class: I
protection class: IP20
norm: CE - CEBEC
glowtest: 850°C
distance: 0,5 m
netto weight: 0.4 kg
|
|
|
Decorative wall mounted and free-standing luminatres, which bring SLUZ a little closer to the world of home decoration and private spaces. Hallways, stairs, hotel rooms and business centres are the perfect setting for a series of lumlnaires which prioritise the elegance of forms, materials and finishes. Subdued accent lighting, reflected off the wall or ceiling, together with simple and clearly defined forms of great style and personality, which have enough impact to make them the key elements in the decoration of the space.
|
|
|
Tiempo represents the best solution for the varied architectural environments of 2005 and beyond. A family of ultra high performance reflector systems interfaced with creative, diminutive mountings and a unique fixture design, make the Tiempo the superior choice where both aesthetics and performance are required.
|
|
GO XT WALL 1x39W
not dimmable, white
The GO XT CEILING and WALL luminaires are fitted with the same newly developed light panels with O.S.A.*-Technology as the GO XT FLOOR & TABLE. They boast the same advantages in terms of efficiency, glare reduction and user-friendly cleaning and maintenance. This range comprises dimmable and non-dimmable direct/indirect fixtures using T16 39W and 54W lamps. * open structure-antiglare
|
|
The PMC Steel Shape Series is one of our most popular lines. All products feature a die-formed curved steel housing for sleek modern look. Formed on sophisticated presses, this fixture has perforated areas along the length of the fixture for dramatic detail & point source light recognition
All steel shapes fixtures have powder-coated housings, with precision-formed, high reflectance (Minimum Reflectance Factor 90%), enamel reflectors for optimal efficiency. Fixtures are UL listed, and have standard electronic ballasts. Each fixture is lamp-tested at the factory before shipment.
Our ability to form custom lengths and widths allows PMC to produce the fixtures.
|
|
|
The PMC Extruded Shape Series is available in a wide range of downlight patterns options and is an efficient indirect uplight, with widespread distribution for low ceiling ratios. Standard fixtures are powder coated white, (custom colors available), reflective steel surfaces are high gloss white enamel (minimum reflectance 90%). Fixtures are UL listed, and have standard electronic ballasts. Each fixture is lamp-tested at the factory before shipment.
|
|
|
|
|
|
Features: A versatile wall-mounted lighting system with an array of finish options. In the Glow (GLO) body style, light filters through
punched metal or translucent acrylic giving the fixture a bold presence
on the wall. In the Throw (TRO) body style, a high-performance
forward throw reflector system evenly lights the ceiling. Mounting brackets can be fixed at any point along the extruded rail to adapt to field conditions.
Construction:Fixture structure is extruded aluminum. Cast end plates
are cast aluminum. Flat end plates are 20-gauge painted, stainless or
galvanized steel, copper, or brushed aluminum. GLO fixture body is
translucent frosted extruded acrylic, or punched 20-gauge painted,
stainless or galvanized steel, copper, or brushed aluminum. TRO
fixture body is frosted extruded acrylic with inner opaque reflector,
20-gauge painted steel, brushed or patterned aluminum, copper,
galvanized or textured stainless steel.
Finish: Steel fascia panels, extruded aluminum rail, cast aluminum
endplates and flat endplates are finished in polyester powder paint.
For flat endplates and fascia panels, refer to ordering matrix for optional
metal finishes or refer to Defining Section for optional paint colors.
|
|
|
The Wal-Wave luminaire performs well in stairwells, lobbies, hallways, open and small offices, and retail spaces. This fixture is a complement to the linear, shallowradiused Wave and is designed for T8 or T5/HO lamps. The low-profile indirect wall bracket can be perforated, slotted or have a solid fascia with aluminum end medallions. The Wal-Wave’s standard finish is textured matte white. Standard lengths are four and eight feet.
|
|
|
The Wal-18 is an ADA-compliant fluorescent wall sconce that complements the Pru-9 and Wal-8 . The perforated housing of the Wal-18 gives a subtle glow to the surface of the luminaire and provides a refined accent to any space. The fixture is available in painted or galvanized steel finishes with a choice of 18 watt or 26 watt compact fluorescent lamps.
|
|
|
Spotlight l*3w goes up on multidirectional kneecap. Structure out of aluminum and/or brass (according to completion). Fixing without apparent screw. For small rules of several spotlights, consult us.
|
|
|
|
