|
|
Corona was designed by
Poul M. Volther (1918-2001) and received a lot of acclaim when it was first launched in 1964. Since its making the chair manufacturers has been shown in a wide variety of fashion features, film and music videos. Corona was the chair used by the chiefs of state in Europe during the EU summit in Copenhagen in December 2002. A rare combination of organic expression and technical streamlining. The four upholstered shells give maximum support of the body with overt associations to both spinal column and ribs of the human anatomy. Due to its floating constellation Corona seems to be almost trans-parent and effortlessly blends in with the room.
|
|
POLTRONCINE
Solid and refined represent an important inside complement of furnishings of the room thus like in the hall and the rooms of the hotel.
Composed from a schiumato metallic chassis to autoestinguente cold, fixed lining in vellutino termolegato with expanded polyurethane ignifugo velcrabile and sfoderabile coating in accredited fabric furniture ignifugo class IM. |
|
Designed for his award-winning Oyster House, Nigel Coates' 'Oxo' seating system is based on two complementary forms which can be used together to create dynamic and flexible arrangements or as individual seats. A chaise longue, small pouffe and side table furniture complete the range.
Upholstery is available in a wide range of design fabrics and leathers. Backs and seats can be covered in contrasting fabrics. Frames are of beech and preformed ply with elastic webbed seats, upholstered in graded CMHR foams with a dacron wrap.
Seat height 410mm
Design design: Nigel Coates |
|
| Ronda, series 8480, is a design by Jorge Pensi. This comfortable armchair furniture not only makes a good impression in your entrance hall, but also makes clear what high demands you make on yourself and on others. The compact appearance and the combination of aluminium with leather or a top-class design fabric lend elegance and class to this armchair. Ronda gives any room a certain charisma. |
|
ALBAN by Yves Halard
L 64 x P 70 x H 98 |
|
Lauren
Wallsaver Chairbed
Converts into bed furniture by pulling into the room away from the wall. Back converts into head support by flipping down after bed has been pulled out. Locking front and rear casters. Concealed rear casters.
FEATURES AND OPTIONS
- Hardwood interior construction
- Interior seat panel support
- Tubular steel bed mechanism
- Foam upholstered seat, back, and arm panels furniture |
|
Functional in appearance, superbly designed and finished but offering the ultimate in comfort, this small armchair manufacturers with its austere curves is equally suitable for domestic and business use.
|
|
Alexander Taylor's luxurious armchair is available in high-back and low-back configuration with either self-centering swivel base or with beech legs. Careful selection of foam grades and a flexible back support provide great comfort while retaining the sharp lines of the chair furniture's dynamic form.
Internal frames are of beech with elasticated seat and back suspension; upholstery is of a graded CMHR polyurethane foams with a polyester wrap. The swivel design pedestal is finished in a matt mid-grey epc; alternative beech legs are finished with a clear lacquer.
Seat height 350mm
Design: Alexander Taylor |
|
A classic tub chair suppliers with complementary two- and three- seat sofas furniture.
Solid beech frame with outer shell of preformed laminated timber, upholstered in graded CMHR foams with a wrap of polyester fibre. Glides are fitted as standard but castors may be specified as an optional extra.
Seat height 430mm
Seat height with castors 470 mm |
|
Designed by Tom McHugh
Contemporary contemporary design combining wood and metal elements
Waterfowl feather back cushion
|
|
Dieter Kusch wanted to create a compatible series with many faces. The high-quality bench furniture series Vega for lobby, lounge, waiting and living area of health centres or hotel/catering service puts the room and the visitors in the limelight. The modular side parts, the darts and the buttons in the upholstery offer latitude to express individuality. The wooden subframe for a cosy, warm ambience, the metal frame for modern elegance.
|
|
| A small armchair suppliers with harmonious rounded lines and a gap at the back suggesting lightness. The half height backrest makes it comfortable, and, at the same time appropriate for work spaces. Also available with powder painted metal tubular legs, with or without wheels. |
|
Designed for both contract and domestic environments, the generously proportioned hm85 chair supplier is characterised by the meticulous detailing of its sculptural form and skilful tailoring. The steel framework with sprung seat is encapsulated in a high-density CMHR foam moulding. High and low backed versions are available, both on swivel bases; the self-centering swivel base is finished in a matt mid-grey epc, or chromed legs. Footstools are available on four star bases or chromed legs. Complementary side tables furniture are available in oak or walnut veneers, in white or pale grey laminate or in acid etched glass on four star bases only.
Seat height: 380mm
Design design: Simon Pengelly |
|
Swivel armchair with aluminium legs with wheels. Palisander, cherry or black painted wooden frame. Polyurethan foam
upholstery. Leather or fabric furniture cover. |
|
Armchair with aluminium legs. Palisander, cherry or black painted wooden frame. Polyurethan foam upholstery. Leather or fabric furniture cover.
on wheels. |
|
| KONTRA is an executive chair manufacturers in keeping with EN 1335-1/2/3 type B. It is a chair with adjustable back with up&down mechanism. Features syncro mechanism and seat height is controlled by a gas lift. Adjustable polyurethane armrests. All swivel chairs are standard equipped with hard wheels for soft floors (monochromatic wheels); soft wheels for hard floors are available upon request (bicoulour). |
|
| ALISEA is an executive chair supplier with wooden seat and back with upholstered foam. Features syncro mechanism and seat height is controlled by a gas lift. Armrests could be fixed or adjustable. All swivel chairs furniture are standard equipped with soft wheels for hard floors (bicolour); hard wheels for soft floors are available upon request (monochromatic). |
|
| CONTACT is an armchair manufacturers in keeping with EN standards 1335-1/2/3 type B. It is an armchair with seat and back in fire-retardant foam upholstered in fabric furniture or leather. The armchair's distinguishing feature is its back, which, like the arms, is made of either natural or stained beech plywood. Features synchro mechanism and gas lift. The back has lumbar support adjustment. In addition, lumbar support adjustment is standard issue on swivel chairs furniture. All swivel armchairs are standard equipped with hard wheels for soft floors. Soft wheels (bicolour) must be requested for hard floors. |
|
ALICE is a swivel armchair, in keeping with EN standard 1335-1/2/3 type C. Models with swivel base have adjustments for:
- seat height and back angle through levers located under the seat, - backrest tension, with knob located under the seat. Features seat height gas lift mechanism and locked or free float plate action. All swivel armchairs are standard equipped with hard wheels for soft floors. Soft wheels (bicolour) must be requested for hard floors. The armchairs suppliers are standard equipped with chromed aluminium fixed arms. |
|
A classic designed executive chair suppliers works comfortably in private office or conference room. The soft black leather chair manufacturers is covered by the Steelcase lifetime warranty and meets ANSI/BIFMA standards.
Standard features.
Swivel-tilt mechanism, pneumatic height adjustment, tilt tension adjustment, upright back lock, black leather on seat and back, simulated leather on balance of chair. Guest chair - black tubular steel sled base, non-adjustable glide.
|
|
An executive chair manufacturers in soft full grain leather, with two different, highly comfortable, back heights. The small back cushion can be regulated, and the modern pedestal is equipped with a pneumatic piston to allow regulation of height and incline. A model that marries ergonomic comfort and a balance between classic and modern styles.
|
|
| Sonatec is an advanced new task chair designed exclusively for Boss by established designer Paul Brooks. Sonatec incorporates a unique height adjustable plastic J-bar which is a major development for Boss and sets new engineering standards for task chairs furniture. The elegant design of the J-bar is unified with the contoured base, whilst the seat pan is generous in size to provide maximum comfort to the user. Sonatec's distinctive combination of advance technology, specialised control purposes and affordable parts has successfully pulled together to produce a sophisticated task chair with competitive pricing. Standard features include thoracic support, synchronised mechanism, 3 degree forward tilt, sliding seat, height and width adjustable arms, and a black nylon base, castors and frame. Options include: a painted, polished or RAL 9006 aluminium frame on black castors. A RAL 9006 or polished aluminium adjustable arm riser. Shukra lumbar pump. Multi-functional arms pads. |
|
Key
Combining strong aesthetics with maximum comfort, 'Key' is an intuitive chair supplier that can be 'personalised' to suit the individual. Boss Design design's new thoracic support system works in harmony with the fully synchronised tilt technique to maintain user alignment, designed to prevent back pain. The product range utilises Boss' expertise in upholstery and engineering. 'Key' benefits from a brand new method of design fabric finishing that ensures longevity and a superior finish. The Key range is available with the following options: Task chair - arms or non arm, Cantilever stacking chair manufacturer - arms or non arm, 4 legged visitors chair, non arm, Black aluminium base/9006 castors, Polished aluminium base/9006 castors, Adjustable arm with sliding pad, Grey riser on adjustable arm, Visitors cantilever with chrome frame.
|
|
| Designed by Paul Brooks, 'Sona' guarantees to provide maximum support, controlled flexibility and optimum efficiency. The elegant design is characterised by a focus on ergonomics, high quality standards and a strong aesthetic appeal. 'Sona's' unique J-bar works in conjunction with the back to provide excellent adjustability, comfort and clean lines, and offers optional Shukra lumbar support. 'Sona' is a task chair suppliers designed for flexibility and ease of use - achieved by utilising the best technology and control purposes to produce a chair which is light and easy to use but has maximum strength and durability. Standard specifications: thoracic support, synchronised mechanism, sliding seat, height adjustable arms. The arm riser, plastic base, castors, frame and arm frame are all black as standard. Options include: 4 degree tilt mechanism, black aluminium base, silver 9006 base, polished base, 9006 castors, sliding arm pad, silver arm riser and chrome frame. |
|
|
|
