|
|
| Allsteel offers seating solutions that fit your organization, office environment, and staff preferences. Every chair is designed for user comfort, engineered for performance, and manufactured for years of durable service. And Allsteel offers chairs in a range of designs that complement any interior design and every work application. |
|
Kube
Design: Eoos
Engineering: Studio Ugolini
Seating system on bar for conference/theatre from 1 to
5 seating units.The seating can be assembled in different
potions (straight/radial) also according to different floor
inclinations.Accessories: tilting board, simultaneous translation
device and voting unit either in the back or in the
armrest, left or right lighting unit, multi-purpose holder
unit, etc. Covering: soft leather or fabric furniture. |
|
| Refined design design, aristocratic elegance, noble materials, fine technics, artisanal care, tested mechanical, proved design security, studied ergonomy, all interpreters of the same project and all protagonists at theatre with Teatro. A product realized under the direction of Afra and Tobia Scarpa and ready to new interpretations under other directions. |
|
Varius Auditorio chair -1983-
Oscar Tusquets
Backrest and seat composed of molten aluminium and skimmed in flexible polyurethane BS. Upholstery in versions of Trevira Violetta CS fabric furniture 100% polyester: red red (50CS), orange caramel (53CS), chestnut brown (56CS), night grey (64CS); tela Ecosued 100% polyester: yellow sand (ECO125), burned orange (ECO224), luminous garnet (ECO096), green moss (ECO405), ink blue (ECO912), sparkled brown (ECO6777), sparkled blue (ECO6735) and sparkled ash-grey (ECO6799); leather: black, rosso bulgaro oder natural; or COM (Customer’s Own Material).
Standars made of molten aluminium and painted with black RAL 7021 powder.
Resonator made of polyurethane RIM. Arms composed of a steel frame and skimmed in integrated polyurethane.
The numbering system is done using the plastic sections in ABS placed in the upper part of the arms and in the lateral end of each row.
-Accessories:
Optional desk, made of a board birch wood of 15mm thickness, painted in micro textured. With left-handed option. It is not detachable accessory. Only for use on new Varius auditorio chairs suppliers.
Varius Auditorio chair without desk: 50-57 x 60 x H.82cm (H. Seat: 46cm)
Varius Auditorio chair with desk: 50-57 x 71 x H.82cm (H. Desk: 65cm)
|
|
Kapton 8564
Design: Sture Eng & Kjell Nordin
Kapton is an office chair furniture that offers comfort, ergonomics and elegance in its own distinctive style. It has the same Synchron tilt mechanism as the big-selling 8000 Synchron chairs furniture.
Thigh support (fore-and-aft movement of the seat), seat height and backrest height are all adjustable and the chair offers an optional adjustable headrest and a choice of seat length.
The Kapton office chair has coordinated visitor and conference-room chairs. |
|
Seat from the detail forms bent to ellipse with structure in lastroni of solid, back with profile in walnut massello, equipped revolving base of mechanism for the regulation of the height and the inclination.
|
|
Seat especially designed for conference halls, theatres and auditorium.
Seat and backrest made of beech plywood, 12mm thick, and finished with 2 layers of polyurethane varnish. Upholstery is made of open-cell polyurethane foam (self-extinguishable according to legal prescriptions), covered with M-1 fireproof fabrics furniture with an additional underlying M-1 layer –shade to be chosen by the customer.
Backrest is fixed to the set by means of two side components made of extruded aluminium. Thus, the row achieves uniformity and firmness.
Sidearms also enclose the folding socket joints, which allow the seat pan to fold by means of a spinning axle and a torsion spring, determining the automatic reversion.
Joints made of injected polyamide, very resistant to mechanical demands, and do not require maintenance.
Fixing to the floor is achieved by means of a steel plate support, 10mm thick, onto which the sidearm is anchored. Every support has two orifices for its fixation to the pavement. |
|
Seat especially designed for theatres and auditorium.
Seat and backrest made with open-cell polyurethane foam on a beech plywood core, 12mm thick, (self-extinguishable according to legal prescriptions), covered with M-1 fireproof fabrics furniture, zipper finishing, with an additional underlying M-1 layer.
Backrest is held and protected with an outer steel shell with joints to the sidearms.
Sidearms are made of steel plate (50x5mm) and enclose the folding socket
joints, which are made of injected polyamide, very resistant to mechanical demands, and do not require maintenance. Armrests made of solid beech wood, finished with two layers of polyurethane varnish –shade to be chosen by the customer.
Fixing to the floor is achieved by means of two orifices placed at the bottom part of sidearms.
This model includes seat and row numbering. |
|
Seat especially designed for conference rooms, theatres and auditorium.
Seat and backrest made of beech plywood, 12mm thick for the seat and 10mm for the backrest, framed at the sides and at the top with solid beech wood. The set is upholstered with polyurethane foam covered with M-1 fireproof fabrics furniture with an additional underlying M-1 layer.
Sidearms structure made of a steel plate, 8mm thick, with epoxy powder coat finishing.
It holds high-density veneered MDF boards. Same finishing (fabrics) as seat and backrest. It also encloses the folding socket joints, which are made of injected polyamide, very resistant to mechanical demands, and do not require maintenance.
Armrests made of solid beech wood, 10mm thick, with the same finishing (fabrics) as sidearms.
Fixing to the floor is achieved by means of two orifices placed at the bottom part of sidearms, using specific hardware. |
|
Manel Bosch / Jordi Bosch / Joan Tarrús
Seat especially designed for theatres and auditorium.
Seat and backrest made of polyurethane foam, covered with M-1 fireproof fabrics furniture with an additional underlying M-1 layer. Seat mat is fixed to a beech plywood core, 12mm thick. Backrest has a core made of syntrewood (recycled plastic material) with an outer shell made of aluminium.
Sidearms made of high density waterproof MDF panels furniture finished with wood plates, 1.5mm thick, and 2 layers of polyurethane varnish –shade to be chosen by the customer. They also enclose the folding socket joints made of injected polyamide, very resistant to mechanical demands.
The top-side part of sidearms, i.e. the armrests, is made of solid beech wood, 10mm thick.
Fixing to the floor is achieved by means of a steel plate support onto which the sidearm is anchored. Every support has two orifices for its fixation to the pavement. |
|
Upholstery on seat and backrest made with polyurethane foam on a beech plywood core, 12 mm. thick, (self-extinguishable according to legal prescriptions), covered with M-1 fireproof fabrics furniture, zipper finishing, with an additional underlying M-1 layer –shade to be chosen by the customer.
The automatic tip-up mechanism rotates seat and backrest to the fold position when the seat is vacated.
Sidearms made of aluminium with 80-micron powder coat finishing –shade to be chosen by the customer-, fixed on a steel tubular frame and legs.
Armrests are made of semi rigid black polyurethane foam. As an option, they can also be made of solid beech wood.
Fixing to the floor is achieved by means of metallic supports finished with electrostatic epoxy powder –shade and texture to be chosen by the customer.
As an option, this model includes seat and row numbering. |
|
Seat designed for theatres and auditorium.
Seat and backrest have an asymmetrical-shaped mat made of polyurethane foam, fixed on a beech plywood core, 12mm thick, with the same dimensions. The set is covered with M-1 fireproof design fabrics with an additional underlying M-1 layer, and joined to the outer structure by means of 4 steel flaps fixed to the inner side, using specific hardware.
The outer structure is also made of beech plywood, 12mm thick, finished with 2 layers of polyurethane varnish. Appearance and finishing can vary upon request.
Special design furniture of sidearms is made of high density waterproof MDF design boards, finished either with noble plywood and 2 layers of polyurethane, or upholstered just like seat and backrest.
Armrests made of solid beech wood and are bent-shaped.
Anchoring is achieved by means of a steel plate support with two solid steel pivots, specially mechanized to be inserted inside the sidearms, fixing the whole set. |
|
Seat and backrest made of high-density polyurethane foam, with a frame made of steel tube and mesh, covered with M-1 fireproof fabrics furniture with an additional underlying M-1 layer.
Sidearms made of rolled wood, 50mm thick, finished with two layers of polyurethane varnish –shade to be chosen by the customer. They hold both seat and backrest and also the folding joints, with u-shaped axles.
Armrests made of solid beech wood, finished with two layers of polyurethane varnish, fixed to sidearms by means of a steel plate, 6mm thick, placed in the inner side.
Anchoring is achieved by means of a steel plate support, 6mm thick, onto which the sidearm is fixed. Every support has two orifices for its fixation to the pavement. Epoxy powder coat finishing –shade to be chosen by the customer. |
|
Seat of minimal dimensions especially designed for conference halls, theatres and auditorium.
Upholstery on seat and backrest made with polyurethane foam on a beech plywood core, 12mm thick, (self-extinguishable according to legal prescriptions), covered with M-1 fireproof fabrics furniture, zipper finishing, with an additional underlying M-1 layer –shade to be chosen by the customer.
Sidearms made of extruded aluminium, with 80-micron powder coat finishing–shade and texture to be chosen by the customer.
Armrests made of beech wood, with two layers of polyurethane varnish –shade to be chosen by the customer.
The automatic tip-up mechanism rotates seat and backrest to the fold position when the seat is vacated.
Fixing to the floor is achieved by means of metallic supports finished with electrostatic epoxy powder –shade and texture to be chosen by the customer.
This model includes seat and row numbering. |
|
Seat especially designed for theatres and auditorium.
Seat and backrest outer pans made of beech plywood, u-shaped, 12mm thick, bent at the sides. Upholstery is made of open-cell polyurethane foam, 110 mm thick, covered with M-1 fireproof fabrics furniture.
Sidearms made of u-shaped steel plate, 3mm thick, closed at the back by another flat steel strip.
Armrests made of beech plywood finished with two layers of fireproof polyurethane varnish.
Folding system is based on a double inner support, consisting on spinning axles and torsion springs fixed to the seat.
Anchoring to the floor is achieved by means of a steel plate support, 10mm thick, onto which the sidearm is fixed. Every support has two orifices for its fixation to the pavement. Powder coat finishing –shade to be chosen by the customer. |
|
Seat of minimal dimensions especially designed for conference halls, theatres and auditorium.
Upholstery on seat and backrest made with polyurethane foam on a beech plywood core, 12mm thick, (self-extinguishable according to legal prescriptions), covered with M-1 fireproof fabrics furniture, zipper finishing, with an additional underlying M-1 layer –shade to be chosen by the customer.
Sidearms made of extruded aluminium, with 80-micron powder coat finishing–shade and texture to be chosen by the customer.
Armrests made of beech wood, with two layers of polyurethane varnish –shade to be chosen by the customer.
The automatic tip-up mechanism rotates seat and backrest to the fold position when the seat is vacated.
Fixing to the floor is achieved by means of metallic supports finished with electrostatic epoxy powder –shade and texture to be chosen by the customer.
This model includes seat and row |
|
Seat especially designed for theatres, auditorium and conference halls.
Seat and backrest made of beech plywood, 12mm thick, and finished with 2 layers of polyurethane varnish. Upholstery made of open-cell polyurethane foam (self-extinguishable according to legal prescriptions), covered with M-1 fireproof fabrics furniture with an additional underlying M-1 layer –shade to be chosen by the customer.
Sidearms made of high density waterproof MDF panels furniture finished either with beech plywood and 2 layers of polyurethane varnish, or upholstered with fireproof M-1 barrier and fabrics, just like seat and backrest.
Backrest is fixed to the set by means of two side components made of extruded aluminium. Thus, the row achieves uniformity and firmness. Sidearms also enclose the folding socket joints, which allow the seat pan to fold by means of a spinning axle and a torsion spring, determining the automatic reversion.
They enclose the folding socket joints, which are made of injected polyamide, very resistant to mechanical demands, and do not require maintenance.
Fixing to the floor is achieved by means of a steel plate support, 10mm thick, onto which the sidearm is anchored. Every support has two orifices for its fixation to the pavement. Powder coat finishing –shade to be chosen by the customer. |
|
Seat designed for theatres, auditorium and conference halls.
Seat and backrest made of beech plywood, 12mm thick, framed by a thicker board, u-shaped (28mm thick), finished with 2 layers of polyurethane varnish (self-extinguishable according to legal prescriptions) –shade to be chosen by the customer.
Upholstery on seat and backrest made with polyurethane foam on a beech plywood core, covered with M-1 fireproof fabrics furniture, with an additional underlying M-1 layer –shade to be chosen by the customer.
Sidearms made of beech plywood boards (120x60mm), with 2 layers of polyurethane varnish –shade to be chosen by the customer.
Armrests made of steel plate, 10mm thick. Epoxy powder coat finishing.
Folding joints made with lateral flaps and a solid steel axle, hiding the torsion spring.
Anchoring is achieved by means of a T-shaped steel plate support, 10mm thick, with two pivots inserted in the sidearms, fixing the whole set. |
|
Seat designed for theatres, conference halls and auditorium.
Seat and backrest have polyurethane foam mats on a beech plywood core (5mm thick), fixed to an outer shell (12mm) of beech plywood. The whole set is upholstered with M-1 fireproof fabrics furniture, with an additional underlying M-1 layer.
Sidearms made of steel plate, 6mm thick and 60mm wide.
They hold the folding socket joints which allow the seat pan to fold by means of a spinning axle and a torsion spring. Backrest is fixed by means of two pivots, made of solid steel, using specific hardware.
Welding made under tested conditions, with bow of continuous thread and controlled atmosphere. Screws and fixing materials made of finished steel. |
|
| More than you expect for less than you expected. Plush comfort. Power and data access. Low life-cycle costs. Increase learning and retention by providing comfortable seating for students. Built to ensure trouble-free longevity, Lancaster seating is durable and easy to maintain. |
|
These new versions of the Aston collection, with their distinctive design and balanced proportions, are intended for conference halls, offices and executive meeting rooms.
The Direction, Office and Conference models are distinguished by the height of the chair-back. The three models come with a choice of two bases: a 4-star base with optional automatic seat positioning mechanism or 5-star base with castors and a gas-operated height adjustment mechanism.
|
|
Ample, welcoming shapes and an elegant, discreet design add a new dimension to Catifa. Two solutions that are the ideal complement to lounge or waiting room environments. But Catifa can also be used in any and every domestic setting, such is the versatility that is a hallmark of this seating system.
Catifa 80 differs from the Catifa 70 model in its wider seat and low back. It comes with a central aluminium structure or steel sled structure. |
|
Elegance by design, this chair suppliers combines slim, sleek lines with ample surfaces and is ideal for domestic or contract use. With its unmistakable lines, Corte is the result of Arper’s commitment to R&D and comes in two superb versions: upholstered in cuoietto with visible zips, or in full-grain leather without zips
The frame, designed to make the armchair suppliers soft yet streamlined, is made of foamed steel. The leather covering is available in a range of colours.
|
|
Block of high-density polyurethane foam, covered with foam-lined velour and pasted to 19 mm plywood.
Internal heat-soldered tubular metal structure.
Choice of two backs:
Upholstered back, with metal structure and quilted with Dacron fibre.
Leather back, with metal structure upholstered in case-hide quality leather.
Four colours to choose from: white, black, terracotta and wenge.
Polypropylene swivel legs built into the wood.
|
|
Frame: Hardwood / Plywood laminate
Cover: Fixed
Seat Cushion: Fixed Foam
Back: Fixed Foam
Seat Suspension: Elastic Web
Back Suspension: Elastic Web
Scatters: None
Legs: Nylon glides
Detailing: Stainless Steel arm |
|
| With a fashionably minimalist appearance and subtly ornamented, intricate detailing, the Grand Salon Collection evokes the historic character of a bygone era to meet the complex needs of today's designers. |
|
theba
clear-line aesthetics
theba fulfills the demand for an appealing piece of upholstered furniture, combining representation and function. The formal contrast between curved and straight lines creates tension and bestows high individuality upon the furniture.
Design: Ton Haas
Lounge chair manufacturer
2040-104
Leather upholstery
|
|
BOULEVAR CS/3324-GU
Revolving chair manufacturers with metal base, while the internal structure, the backrest and the arms are made in plywood. Available in over than 100 finishes of leather or fabric furniture, it is offered also in bi-colour version. The fabric is completely removable while it is fixed - non removable - in leather.
Design design: Emilio Nanni
Dimensions in cm:
W: 64
D: 85
H: 74
Hs:42 |
|
|
