|
|
WATERPROOF
Pool cover drive mechanism is fully submersible, no longer are drains a problem nor does recess flooding mean an expensive electric motor replacement
SAFETY
No electrics near the pool for greater safety. All pool cover electric power and switches are remote at the equipment pad, also means fewer problems with pool cover inspections.
POWER
Hydraulic power delivers more power, yet dials in only as much as needed to operate the pool cover. Virtually all pool configurations can now be covered, what before was a limitation is now the norm.
FAILSAFE
Pressure relief valves gently stop the pool cover if it meets an obstruction, instead of breaking a mechanical shear pin linkage that needs to be replaced before operation of the pool cover.
DURABILITY
Hydraulics are widely used in heavy equipment. The unique patented duo-motor HYDRAMATIC system eliminates mechanical linkage and clutches to change pool cover direction and motion of the cover. It has the least number of parts of any other automatic pool cover system, yet has the full range of safety and convenience features. Originally designed for Commercial Application.
LIMIT SWITCHES
Elegant in its simplicity, the end of travel of the pool cover at each end of the pool is controlled by pressure relief valves.
WARRANTY
The HYDRAMATIC pool cover system comes with a twenty year limited warranty on the mechanism, and a seven year limited warranty on the fabric. For additional warranty information on your Aquamatic pool cover, call your Aquamatic representative.
|
|
|
The extended cantilever deck process also allows freeform pools to use an undertrack installation with track channel. With this technique, the tracks are laid out parallel to each other at the widest part of the pool on the first deck. A second deck is built slightly raised to allow the cover to open and close without obstruction, and it mirrors the shape of the pool.
|
|
|
Vanishing-edge and vanishing-end pools are designed to highlight the horizon line when sitting in the pool. A vanishing-edge pool (also known as an infinity-edge pool) can have an automatic pool cover installed with a special undertrack setup. Discuss incorporating a cover system into your vanishing-edge pool during the beginning planning stages.
|
|
Using its experience in the extruded slats sector, Deceuninck has developed POOLONPOOLUP, an exclusive pool covering system, which is perfectly adapted and highly innovative.
POOLONPOOLUP ensures safety, maintains water temperature throughout the year, shields the pool from the elements and protects it throughout the winter.
|
|
The deck-on-deck application uses track channel for seamless integration of an undertrack system on freeform pools. It can be used for concrete, vinyl-liner or fiberglass pools.
During pool construction an outer, slightly raised deck with a rectangular opening is placed around the pool. This allows the tracks, which must always run parallel to one another, to be laid out at the widest part of the pool. The track is hidden under the coping of the slightly raised deck and is therefore out of sight. With this technique, you can also include other features such as spas and waterfalls
|
|
Manually open and close the pool cover in 50-70 seconds!
Durable maintenance free operation
Handle medium to large pools with ease
Looks like an automatic pool cover
Moves like an automatic pool cover
Exceeds ASTM F1346-91 standards
No electrical hazard near the pool
Excellent SEVEN year fabric warranty
Lifetime mechanism warranty
Mechanism can be locked to prevent access
|
|
The HydraLux cover is ideal for commerical applications.A HydraLux pool cover consists of rigid PVC-profiles floating on the water. Opening and closing is fully automatic, and as easy as pushing a button.
The HydraLux can be installed many ways.
Ask your sales representatives for details. The HydraLux cover is fully automatic and easy to use, maximizing your savings.
The HydraLux cover is available in a wide range of colors and materials.
**Clear slat recommended for indoor applications only**
|
|
The fully automatic Indubrella cover system will cover effortlessly, the most intricate shape of pool.
The pool cover operates at the press a button.
The system when in operation, encloses the pool a few decimetres above the surface of the water.
An insulating layer of air is built up under the cover. In this way the Indubrella pool cover virtually eliminates evaporation, thus saving energy and costs.
With the resulting reduction of evaporation, there is less potential for condensation, therefore less corrosion in the swimming pool hall. Additionally, savings of pool chemicals.
Thanks to the precise design and manufacture of the pool cover, the Indubrella-system is custom made to fit each individual pool, regardless of shape, size and virtually any obstruction.
An alternative solution to the in-pool Indubrella-cover, is to suspend the mechanism from above. The cover will automatically descend and envelop the pool surface.
|
|
-ideal for larger pools
-suitable for rectangular pools
-energy saving
-hygienic
-strong and durable
-fully automatic operation
-long durability
-reliable
-good wind resistance
The Inducon slat folding cover can be installed either above ground or underground. A new innovation is the advanced lifting system in which the cover is fully integrated in the pool surround. In the standard integrated model, the topside of the storage space can be used as a bridge with a railing or as the position for the starting blocks.
Product details slatted folding cover:
Material: shockproof hard pvc
Colour: grey
Thickness of slat: 10 mm
Sealing of slat: using conductor splice
Temperature resistance: -30°C - +70°C
Heat conducting capacity: 0,14 kcal/m/h°C
Water absorption according to DIN 53 428: max. 3 vol.%
Water condensation permeability DIN 53 122: very good, 1.0
Ozone resistance according to DIN 53 509: very good
Chlorine resistance: very good
Weight: 4.0 kg/m²
Life span: 10-20 years
The Inducon slat folding cover can be installed either above ground or underground. A new innovation is the advanced lifting system in which the cover is fully integrated in the pool surround. In the standard integrated model, the topside of the storage space can be used as a bridge with a railing or as the position for the starting blocks.
Product details slatted folding cover:
Material: shockproof hard pvc
Colour: grey
Thickness of slat: 10 mm
Sealing of slat: using conductor splice
Temperature resistance: -30°C - +70°C
Heat conducting capacity: 0,14 kcal/m/h°C
Water absorption according to DIN 53 428: max. 3 vol.%
Water condensation permeability DIN 53 122: very good, 1.0
Ozone resistance according to DIN 53 509: very good
Chlorine resistance: very good
Weight: 4.0 kg/m²
Life span: 10-20 years
|
|
COVREX – COMPLETE PEACE OF MIND
The aim of Covrex© is to provide long lasting safety as well as aesthetics. Developed on the basis of the new French safety standards and approved NF P90-308, Covrex © pool cover is perfectly safe for children, and even adults, to walk on.
Covrex© pool cover is made from solid PVC sections to ISO 1183 and can be cut easily to fit all shape of swimming pools.
The triangular profiles are designed in such a way that they optimise heat transfer during the day and insulation during the night. In fact, the pool water temperature will be easy to maintain due to Covrex© total insulation.
As opposed to old type of pool covers, Covrex’s high PVC density gives better result when it comes to cleaning maintenance: This surface prevents any algae formation, and dirt accumulation, both on top and underneath
There are two possible installation methods: underwater installation – below the surface, giving you additional space round your pool. Or on the edge of the pool, which is cheaper and easier to install, and could be transformed into a diving platform if required.
Covrex is available in either grey/beige which fits well into most surroundings or dark blue which absorbs more of the sunlight.
|
|
HydroDeck
HydroDeck has everything:
fully automated operation, safety, heating, insulation and attractive build-in options. The strong slats provide safety and insulation. Solar slats provide, effective, environmentally friendly heating of the water.
HydroDeck covers can be fitted perfectly into the surroundings of the swimming pool with the aid of made-to-measure build-in and build-on systems. Operation can take place by means of a simple key switch or a wireless remote control.
HydroDeck slats
HydroDeck slats are, in terms of design and quality, some of the best available in the market and have proven themselves over a period of 15 years.
Specifications
The quality of the cover is directly dependent on the slats. HydroDeck slats have double hook fastening, 3 large airtight chambers, 60 mm net width and are 14 mm thick. The plastic has an extra UV stabiliser and high quality additives. This is how HydroDeck guarantees perfect functioning and a long life span. The slats are sealed with the patented end caps and a unique adhesive seal.
Solar slats
HydroDeck solar slats heat swimming pools effectively. The additional charges for the high quality plastic that is required for this product are recouped in a very short time. The transparent top layer creates a greenhouse effect, thereby greatly increasing the temperature of the bottom layer. This heat is removed efficiently by the circulating water. The use of HydroDeck solar slats usually makes extra heating unnecessary. In cases of extreme UV radiation, regions with extremely low temperatures or for an extremely long life span we recommend Polycarbonate slats.
|
|
| ... products without information |
| |
| ... products without information |
| |
|
|
see the results for the following category
