|
|
Description:
60mm diameter beacon for flush-mount adjustment consisting of a stainless-steel square or round trim and a tempered-glass circular diffuser. Lights up with LEDs and it has accessories available for non-mains use (PBL units) or at low safety voltage (TL transformer). Particularly suitable for signalling in damp environments.
Characteristics:
Format: AQUA
Operation: Luminaire
Voltage: 230 V 50Hz, 24 V AC/DC
Mains lamp: Amber, white, red and blue LED
Emergency lamp: -
Degree of protection: IP66 - IK07
Autonomy (h): It depends on the power suppy unit*
Electrical insulation: Type II, Type III
|
|
|
|
|
|
B-SIDE LED is an extraordinary urban luminaire and for its organic and light design it suits harmonically at any space granting a high visual comfort.
B-SIDE LED has been designed for lighting both public and private walk through areas. Its auto lighting system allows it to light as well as work as a signaling spot so it becomes a space structuring element.
This new luminaire, is specifically thought for LED sources, so it gives us a high efficiency lighting and a minimum maintenance thanks to the 50.000 hours of its led life.
The range of B-SIDE LED bollards consist of 6 models according to their height and power, all them with an IP65 (Very High protection against powder and liquids). It is made of aluminum extrusion and injection, and painted in grey textured polyester. Its base has an anticorrosive treatment of Alodine 1200, which allows us to fit it on any type of surface.
B-SIDE LED is an excellent anti-vandalism lighting solution, providing safety and solidity for lighting to public parks, gardens and many different urban areas. This is due to its rugged construction (IK 10: Maximum grade of protection) which ensures the fitting remains intact when exposed to possible attacks or collisions.
|
|
Description:
20mm diameter flat-fitting unit comprising a round stainless steel embellisher and a circular polycarbonate transparent diffuser that picks up the LED colour. It includes accessories to enable operation only when connected to the mains power supply (TL safety transformer) or with the mains power on or off (PBL equipment).
Characteristics:
Format: LEDA
Operation: Luminaire
Voltage: 24 V AC/DC
Autonomy (h): it depends on the power supply unit *
Mains lamp: Amber, white, red and blue LED
Degree of protection: IP64 IK07
Electrical insulation: Type III
|
|
Description:
6mm diameter flat-fitting unit comprising a cylindrical stainless steel body and a polycarbonate opal or transparent diffuser that picks up the LED colour. It includes accessories to enable operation only when connected to the mains power supply (TL safety transformer) or with the mains power on or off (PBL equipment).
Characteristics:
Format: CLAVO
Operation: Luminaire
Voltage: 24V AC/DC
Autonomy: It depends on the power supply unit*
Mains lamp: Amber, white, red and blue LED
Degree of protection: IP64 IK07
Electrical insulation: Type III
|
|
Brio WE
Inox build- in Led light (ground, path, wall...)
Power value 20 W
Resistant stainless steel body 3.5t maximum supported
Total watertightness IP- 68
|
|
1750 Bourgogne - Outdoor LED marker lighting for ground embedment or wall fixture, circular Ø 44mm offering a large panel of luminous effect (choice of LED quantity, colour and efficiency) .
Available in red, yellow/ orange, green, blue, cold white or warm white with dynamic RGB colour change on request.
Offering various embedment options based on the required type of connection.
IP68
Chocks resistance 60J
|
|
A2 Range - MODULAR -
Exit sign with individual battery or for use with central battery systems
Synthetic housing.
Viewing distance: 15 or 30m
Maintained or non-maintained operation, or AC/DC power supply.
|
|
|
|
|
|
Keope ceramics introduce the innovative system of lighting TI-LED.
This system represents an ideal solution or in order to decorate or in order to resolve problems of lighting, tracing covered luminous in little illuminated atmospheres. Chosen emitters LED from Keope Ceramics guarantee an elevated luminous flow between those available ones on the market and concur to realize shining solutions of illuminotecnica; moreover the luminous bundle of the LED does not emit dangerous ultraviolet rays, neither the heat of the infrared, thus avoiding problems of illuminated aging or scolorimento of the superficial ones. The used LED, than are taken advantage of a technology to the said solid state to "inverse pyramid", do not contain parts in motion, do not risk therefore to break off themselves, to get out of order themselves, to lose harmful substances or to contaminate the atmosphere. The advantages that this technology introduces are numerous: a greater duration of any other luminous source, practically null costs of maintenance, costs of fall-back, departure to cold without some problem. System TI-LED is applicable to the most modern collections of the production of Keope Ceramics and is available in n° 5 formats.
The color emitted from the LED depends from the color of the stopper in polycarbonate protect that them. The stoppers, interchanging, are available in seven colors. It puts down regarding it, the containing tiles the LED can be rested using traditional adhesives and it is not necessary to take part preventively in the bottom of rests as I block it in the below part the tile is of approximately 3 milimeter www.ti-led.it
|
|
MINI and NIQ leds projectors to be embedded. They incorporate high intensity LUXEON K2 Leds, so the luminance power is assured.
They are valid projectors for indoor and outdoor uses, but its safety class IP68, makes ideals for outer architectonic illumination and aquatic illumination of sources or spaces. These lights incorporate a high resistance glass that makes suitable for zones where there is circulation of people (walks, gardens, public facades, dancing sources in whom it is walked above, parks of game for children,…)
|
|
Luminous bar with LED conceived to trace lines
luminous continuous in any rigid form of mediums.
The bar is equipped with 240LED/m moulded in one
profile of embedding out of aluminum anodized with one
very low thickness. It is fed in low tension of
security (48V), which returns it adapted particularly to
the installation in the public places. Colors of the LED:
cold white (HW) or white heat (HE).
- Low thickness (18mm). Length on request
(until 2m). Possibility of aligning several bars
in order to create continuous luminous lines.
- Electronics components moulded and thus protected
moisture and shocks.
- Advantages of the LED: remarkable longevity (according to
color up to 100.000 hours); low fuel consumption;
resistance to the vibrations)
|
|
|
Until now, the low power consumption and limited output of early generation light emitting diodes were typically only applied for observable decorative or indicative uses, capitalizing on the rainbow hues and programming abilities that are advantageous for entertainment venues, traffic signals, signage, and ornamental elements. In fact, it was often said,"LEDs are meant to be seen, not seen by," however, with the recent development of new super-bright white diodes and other performance improvements, the acceptability of LEDs for mainstream uses has grown exponentially.
|
|
|
The Extremeline 100 series is a powerful projector system in a low profile (3.1" H 1.4") linear LED strip that combines industry leading LEDs with ultra high performance optics spaced to maximize illumination power while producing exceptionally tight beam control without striations.
|
|
Voltages:
LED StarBrite Controller: 85V~132V/170V~264V AC, 50/60Hz
LED StarBrite: 10V~15V DC
Power Consumption:
LED StarBrite Controller: Input: 200W, Output: Max. 150W
(it can drive 4pcs of LED StarBrite)
LED StarBrite: Less than 30W
8 Routes*18 LEDs=144LEDs
Brightness of LED StarBrite:
More than 150cd when all the LEDs emit white light
Strobe speed adjustable
Work ambient temperature:
0°C~40°C
IP Rate:
IPX3
LEDs life:
30000 hours
Control:
DMX 512, Stand-alone mode, Master/slave operation
12 pre-set programs
26 channels
Other Features:
White colour channel available with strobe and dimmer
for testing brightness;
Pre-set programs can be selected both from DMX
control and manual;
Key-press lock for avoiding improper operation
Net Weight:
LED StarBrite(15m signal connection cable included): 20kg
LED StarBrite Controller: 2.3kg
|
|
|
Ground is a recessed floor light IP 67 equips with 3 LED of power of 1W. 6 colors of LED and 3 optics are available (see above). This embeds is suitable for motor vehicles, it resists has shocks of 10J and has a weight of 10OOKg.
|
|
|
Smallest recessed floor light in the world in LED of power IP 66. Floor is a product of beaconing, without optics, its light is diffuseea180°.
|
|
| ... products without information |
| |
ColorSpot 2500E AT
The ColorSpot 2500E AT comes to the market as the most powerful Robe moving light fixture. It is a moving head featuring the MSR GOLD 1200 FastFit lamp and a 1400W electronic ballast. These components enable the ColorSpot 2500E AT' s extremely powerful light output, with a zoom range of 10-30°. The mechanical dimmer/shutter system provides very smooth dimming. The fixture was designed specifically for large stages, big concert halls, outdoor applications and all professional installations where a large light output is needed.
|
|
|
The ColorSpot 575 AT includes all the effects imaginable - two separate gobo wheels with the "SLOT&LOCK" system, two separate colour wheels (one with the "SLOT&LOCK" system), motorized multi-step zoom with three different apertures of 15, 18 and 22 degrees, motorized iris, prism, separate and variable frost effect, remote focus and more. A new optical system and a new dichroic glass reflector increase the light output of the Color- Spot 575 AT. Completely new software enables very smooth rotations of gobos and prism, and 8- or 16-bit resolution for gobo indexing, prism indexing and dimmer. This product is the right solution for all types of installations from big clubs, large discotheques and venues to concerts and touring applications.
|
|
|
The ColorSpot 1200E AT is an electronic ballast version of ColorSpot 1200 AT, which adds even more features like flicker-free operation, enhanced light output, extended lamp life, power-saving mode for economy and reduced weight.
|
|
|
The ColorWash 1200E AT is a powerful moving head wash light that comes complete with a CMY colour mixing system; variable CTO; 2 colour wheels - each with 6 easily replaceable slots for colours and effects; a combined dimmer/shutter and many more features. The ColorWash 1200E AT zoom has a range of 10 - 87° depending on the lens type used. The electronic ballast enables features like flicker-free operation, extended lamp life and power-saving mode. The large LCD display - highly successful on Robe's ColorSpot 1200 AT profile fixture, makes the operation of the ColorWash 1200E AT quick and easy. An Ethernet connection offers additional connectability. The ColorWash 1200E AT is an ideal tool for large theatres, live and television shows, and for all types of installations from multi-purpose venues to large clubs.
|
|
|
The ClubWash 300 CT includes a 250W discharge lamp, high luminous efficiency parabolic reflector, CMY colour mixing, colour wheel with 6 dichroic filters plus open, smooth dimmer and silent fans for cooling. The fixture is perfect for small to medium installation applications.
|
|
|
|
|
|
Robe's new ColorWash 2500E AT moving light fixture is the sister of the ColorSpot 2500E AT and Robe's most powerful wash unit to date.
It is designed for use in large lighting rigs and for venues and installations of all types needing a really punchy moving light effect. It is also ideal for outdoor applications including washing large surface areas (like walls and buildings), and as a searchlight effect.
The ColorWash 2500E AT is fitted with the Phillips MSR Gold 1200 FastFit lamp and a 1400W electronic ballast for the flicker-free operation demanded by TV and fashion environments. The unique optical system maximises brightness and features a high luminous glass reflector.
The colour facility includes both CMY and CTO colour mixing systems and two colour wheels, each with 6 'slot+lock' colour options plus open, offering plenty of variety, from the richest saturates to the subtlest pastels, including 63 colour macros.
Each colour wheel rotates at variable speeds in both directions. There's an option for 'random colour' selection via audio input, or for straightforward 'auto random' colour selection.
The dimmer/shutter unit encompasses the full range of dimming and also produces a highly effective variable-speed strobe effect of 1- 12 FPS. Variable 'random pulse' effects can be activated via pre-programmable macros.
The unit's standard zoom range is 7 to 44 degrees. A front-fitting PC lens option gives a 6 - 35 degree zoom, and a front-fitting wide-angle lens offering a 75 - 87 degree range. All these options make the ColorWash 2500E AT one of the most dynamic fixtures in Robe's inventory.
The unit is controlled, set and addressed via Robe's Navigation System (RNS) which features a practical, easy-to-read graphic LCD display, two control buttons for the control wheel and comes complete with inbuilt demo sequences.
DMX operation offers the choice of 5 DMX protocol modes - utilising 17, 21, 23, 24 or 30 control channels. In addition to standard DMX control, the fixture fully supports Remote Device Management (RDM) operation, and is ready for this "out of the box" with no additional installation required.
The CW 2500E AT has an Ethernet port, supports ArtNet and ACN protocols, and can also operate in 'stand alone' mode.
The colour wheel positioning, zoom function and dimmer shutter all have 8 bit or 16 bit resolution for the fine stepless operation of these effects, specially helpful for long fade-time cues.
The fans can be operated in both "Auto" or "High" modes and are virtually silent.
The LCD display on the unit's base is easy to read and understand, and Robe has included an inbuilt analyser to make fault-finding, pre-setting and diagnostics as simple and intuitive as possible. The ColorWash 2500E AT features 3 editable programs of up to 99 steps each, also easily programmed via the LCD display
|
|
|
The Scan 575 XT is ideal for bigger clubs and spaces where high light output is vital, thanks to a 575 Watt lamp and specially engineered optics. Features include 2 combinable gobo wheels, one offering static gobos and one with rotating gobos; remote focus, iris, rotating prism, frost filter and both CTO and CTB correction filters.
|
|
|
The Scan 1200 XT is ideal for all applications. This light and compact scanner features 2 colour wheels; static gobo wheel with 5 metal gobos and rotating gobo wheel with 4 rotating, indexable and replaceable gobos; effect wheel with 3 different prisms; motorized focus and iris; full range dimming and variable strobe effect. This, the most powerful scanner in Robe scans range has proved to be good for large professional installations.
|
|
|
Based on the successful ROBE DJ Scan 150 XT, the fixture has new electronics and software, extending the ClubScan 150 CT with the master/slave and stand-alone operations. The option of "auto-" or "music-trigger" for easy control is also available; the gobo wheel features 13 unique new gobos; a colour wheel with 11 dichroic filters and UV effect filter and 3 multi-colour filters + open and a shutter with a strobe effect.
|
|
|
The Scan 250 XT is ideal for all clubs, discotheque or pub applications where an element of colour and sparkle is required. Features include gobo wheel with 6 rotating, indexable, replaceable gobos + open; colour wheel with 11 dichroic filters open; remote focus, rotating prism, frost effect and dimmer and shutter.
|
|
|
|