Beams

110 companies | 402 products
Beams
  • Category
  • What’s new?
    Submit
  • Materials
    Submit
  • Material characteristics
    Submit
  • Types of concrete
    Submit
  • Type
    Submit
  • Cross sections
    Submit
  • Longitudinal section
    Submit
  • Applications
    Submit
  • Ecolabels
    Submit
  • Ecological characteristics
    Submit
  • Other characteristics
    Submit
  • Span
    • min.
      max.
    Submit
  • Width
    • min.
      max.
    Submit
  • Height
    • min.
      max.
    Submit

Composite decking

Arval GlobalFloor combines steel and concrete, by using special developed rib and stud forms. The classic advantages of composite building, such as higher industrial prefabrication, high flexibility of use, short building times...

Composite decking

Arval GlobalFloor combines steel and concrete, by using special developed rib and stud forms. The classic advantages of composite building, such as higher industrial prefabrication, high flexibility of use, short building times...

Composite decking

Arval GlobalFloor combines steel and concrete, by using special developed rib and stud forms. The classic advantages of composite building, such as higher industrial prefabrication, high flexibility of use, short building times...

{{productDetail[1704]}}

The Cat Point Creek Bridge in Richmond County, Virginia, is a superstructure that features five 24 m girders made of Ductal®, produced by Bayshore...

The Jakway Park Bridge in Buchanan County is the first highway bridge in North America to be built with a new generation of Ductal® Ultra-High Performance Concrete (UHPC) pi-girders, the first North American highway bridge project to incorporate batching of Ductal®...

The first Ductal® bridge in France was built over a railway line in Saint-Pierre-la-Cour. With a span of 19 m and a width of 12.6 m, it supports a continuous 7.6 m reinforced concrete road, pavement and a cycle lane. Right from the design stage, the objective was...

The Sanderling Drive Pedestrian Overpass in Calgary, Alberta, Canada is 109.90m long with a 64.40m clear span and no intermediate supports, providing motorists with an unobstructed view along the busy throughway. The overpass ties the pathways between two communities through a series of ramps, approximately 103m, with some curved sections....

The Glenmore/Legsby Pedestrian Overpass is a single span, 53-metre bridge that stretches across 8 lanes of traffic in the city of Calgary, Alberta, Canada. It is the second pedestrian bridge in North America to be built with Ductal®, consisting of two cantilevered, high performance concrete abutments and a drop-in, "T-section" Ductal® girder...

{{productDetail[70029]}}

Sleek, open, transparent and flexible, the Angelina TM beam offers a new architectural dimension within an environmentallyfriendly approach....

The use of cellular beams allows a new architectural expression. Structures are lightened and spans increased, pulling spaces together. This flexibility goes together with the functionality of allowing technical installations (pipes and ducts) to pass through the openings.

The...

Surface condition:
According to EN 10163-3: 2004, class C, subclass 1

The range of asymmetric beams has wider, reinforced, welded lower flanges onto which floor elements can be laid.
By optimising usable...

Surface condition:
According to EN 10163-3: 2004, class C, subclass 1

The range of asymmetric beams has wider, reinforced, welded lower flanges onto which floor elements can be laid.
By optimising usable spaces, asymmetric...

Composite steel-concrete construction involves linking the beam to the concrete slab mechanically, to optimise materials.

Furthermore, the reinforced concrete slab, which already acts as the horizontal loadbearing surface, is used as the compression component of the composite section....

{{productDetail[55693]}}

Glulam is manufactured as standard units, in any length, dimension, strength class and surface quality based on customer...

Beam types such as curved or sloped beams in all strength classes and surface qualities.

ADDITIONAL SERVICES
Technical advice and implementation planning
Machining: from single cuts right up to...

Duo/trio beams consist of two (duo) or three (trio) timber lamella bonded together. They are available in top visual and also industrial quality. Due to the small number of glue joints, they are particularly suitable for appearance applications where the beams...

KVH® is finger-jointed solid construction timber that is graded, kiln-dried, and planed. It is suitable for application in all areas of modern wood construction.

ADVANTAGES
Short...

{{productDetail[55252]}}


Galvanized trellis...

{{productDetail[55534]}}

Easy-to-install, the CAST-IN Channels provide adjustable fixing for pre-cast concrete elements and concrete...

{{productDetail[105287]}}

The main beams are linear building elements that mainly work in flexion and are usually supported on...

The Beams Twin are prefabricated elements of constant section of precompressed concrete, freestanding of section in T inverted of variable wing of 60 up to 120 cm in height, also variable of 50 to 100 cm.

They are placed in the work attached (obtaining the flat pressure...

Main Elements of the covered structures,...

{{productDetail[132241]}}

From glued laminated timber roofs to...

From glued laminated timber roofs to...

From large glulam span coverings, to great timber...

{{productDetail[69720]}}

PERFECTION FROM THE GROUND UP
When you daydream about your dream deck, chances are you havent given much thought to what lies beneath it. Even though your decks substructure may not make the family photos, its actually the most important part of your new outdoor space. Our durable triple-coated steel beams, joists and tracks create the strongest, straightest and, yes,...

{{productDetail[56755]}}

We reproduce solid wood out of new sustainable spruce construction...

Sun-Wood antique wood bars are pre-made in many models and quickly...

At the zoo in Heidelberg, Germany, recently a new parking garage with entrance area has been built.
Therefore aluminum profiles bring together the pilaster facade of the buildings...

{{productDetail[129909]}}

HESS LIMITLESS is an innovative glulam product (patent pending). It enables the fabrication of long-span beams comprising short...

HESS TIMBER has the possibility to produce cross sections that are diversely combined (with outer skins glued on width)...

HESS HYBRID is an innovative product of the company HESS TIMBER - a symbiosis of two different wood species whose advantages ideally complete each other and therefore generate an economic product of high quality.

The combined construction...

Special shapes from HESS TIMBER can not only be produced in nearly any dimensions - we also manufacture precise...

{{productDetail[51567]}}

Our oak beams and components range from single posts to integrated ceiling beam layouts. Weve been providing our products as...

{{productDetail[70108]}}

Stability and flexibility


Glulam in spruce and hardwood is an industrial product for load carrying constructions. It is stable and has less fissures and a considerably higher load capacity than common lumber. Next to straight construction elements, two or three dimensionally...

{{productDetail[70007]}}

Glulam is the commonly used abbreviation for Glued Laminated Timber. Glulams tensile characteristics make it suitable for long span, load-bearing widths, such as bridges. It is an exceptionally strong material, used for load-bearing...

I-joists, also known as I-beams, are beams with an I- or H-shaped cross-section. The horizontal elements are flanges, while the vertical element is called the web. They are manufactured to precise specification using laminated veneer lumber or kiln dried...

{{productDetail[70119]}}

The self-bearing NPS® BASIC Beam with a mixed steel-concrete structure is recommended for structures with large spans, residential and industrial buildings,...

The NPS® LIGHT Beam, with a mixed steel-concrete structure, is fire-resistant in accordance with DM 16.02.2007 regulations. It is suitable for designs with prestressed...

The self-bearing NPS® Cls Beam with a mixed steel-concrete structure is fire-resistant in conformity to DM 16.02.2007. It is ideal for fire-resistant structures with large...

The self-bearing NPS® Rei S Beam with a mixed steel-concrete structure and a concrete footing, is patented for optimal coupling with slab ceilings, and allows fire-resistant decks to be realised with no protrusions from...

NPS® ECOTRAVE® is a self-bearing beam a with mixed steel-concrete structure and brick footing, recommended for residential construction, prevents the formation of heat bridges that prevent the occurrence of mould and condensate....

{{productDetail[55901]}}

structural system for large span roofs. Applications:
Large span roof
Small and medium spans
Civil building restructure
Tensostructures, ribbed roofs, lamellar...

{{productDetail[60330]}}

FP McCann manufacture precast concrete beams in a variety of designs and...

{{productDetail[69880]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With ArchiExpo you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation