|
|
RL70EP Architectural Pathway
RL70EP stand-alone pedestal pathway lights feature 2.75" outer diameter tubes and bolt-down, vandal-resistant flanges, which are used in both indoor and outdoor locations
|
|
Matter presence, sensuality of the forms
A such signature, FORZA brings its key of originality to a decoration avant-gardist. Its reversed cone, wrapped in its mineral gangue with the flexible fold, its hat which can incidentally be used as support-upright, do one of them
true urban furniture.
Force and elegance
Conceived in an esthetic reflection & anti-vandalism, FORZA is equipped with one
reflectors out of steel boards which offer a shaving lighting.
Luminous diffuser - IP 55
- Class II
- Reflectors out of steel boards galvanized 5 mm thermolacquered. Screws and bolts stainless, drowned by facing.
- Polycarbonate Washbasin frosted 4 mm - Diffusion with 360 °
Not provided recommended sources
- FC 32 W - GX24Q-3
- FC 42 W - GX24Q-4
- IM 35 W - G8.5
- IM 70 W - E 27
- SHP 70 W - E 27
Body of the foldaway one
- Total Height 0,93 m
- Cylindro-conical reversed
Ø head 440 mm Ø foot 200 mm
- Weight: 150 kg
- Mineral Pallet of Azuly to the choice
|
|
|
|
|
|
Housing: In extruded aluminium, cylindrical section, Ø 180.
Diffuser: In vandal resistant and V2 self-extinguishing clear polycarbonate, UV-stabilized. Louvre in anodized 99.85 aluminium.
Painting: In several stages. First stage: black epoxy cationic electrocoating, upon chromate treatment, resistant to corrosive and saline environments. Second stage: UV-stabilizing primer, and lastly rough finish with gris coating.
Lampholder: In white polycarbonate, with phosphor bronze contacts (FLC), socket G24q. In ceramics with silver-plated contacts. Socket E27.
Electric gear: 230-240V/50Hz power supply. Hard wire, 0.50 sqmm cross-section, PVC-HT sheath resistant up to 90°C, according to CEI 20-20 standard, or silicone flexible wire terminated with quick-connect clamps in admiralty brass, glass braid, 1.0 sqmm cross-section. 2P+T terminal block, maximum allowed lead cross-section of 4 sqmm.
Standard supply: Steel flange to be sunk underground.
Regulations: Produced according to applicable EN60598-1 CEI 34-21 standards, IP54IK10 degree of protection in compliance with EN 60529 standards.
Non-polluting louvre, ideal for installation in zone 1 (UNI10819).
|
|
|
Die-Cast alu minium, cataphoresis treated and powder painted body in colour RAL 9006. Cast aluminium locking rings. A4 stainless steel screws. 12 mm tempered glass cover. Fixed to the ground with the special tie rod to be ordered separately or with dowels. Also available in black and white. Versions for other types of lamps or with screen for one-side emission are available on request.
|
|
Slim and elegant bollard and wall light, complementing the Madison lantern and column range
Slim and elegant bollard
Variety of lamp types
Luminaire head takes on floating appearance when lit
|
|
|
Lighting with solar energy BS2 is an advantageous and fast solution for a beaconing of alleys, ways and solid masses. Thanks to its autonomous solar function, it is established anywhere without electric network connection.
|
|
The photoelectric cells store solar energy during the day in a battery. The diodes start automatically as of fallen the night and stop in the small hour. Lighting is planned for one night complete (optimum sunning).
Assets: a microprocessor allowing to control the luminous power of the diodes according to the supplied energy.
Characteristics: Ø 130 mm/Height 1 Mr. Matériau: stainless. Solar collectors on the higher part of foldaway and with 360°. Electronics of management with integrated microprocessor and refillable battery. 2 modes of lighting: normal/energy saving (ex: in winter). 5 leds white (3x0,4W with the level of the diffuser + 2x0,12W directed towards the base).
|
|
Lenght 750 mm
Width 750 mm
Height 1730 mm
Weight 230 kg
Materials:Polished or cut granite
|
|
|
PB: double emission direct and indirect lighting bollard. Product includes: 1m pre-mounted H07RN-F cable and PG16 cord grip to ensure a perfect watertight seal.
|
|
Location: Recommended illuminated bollard to limit and mark paths, parks and pedestrian zones.
Material: Zinc plated steel and bronce colour painted.
Diffuser: Engraved methacrylate.
Fixing: 4 M8 embedded bolts (not included).
Gear tray: E27
23W compact fluorescent.
|
|
Location: Recommended illuminated bollard to limit and mark paths, parks and pedestrian zones.
Material: Injected aluminium cast iron and black oxiron painted.
Diffuser: Semi-transparent glass.
Fixing: M10 x 200mm embedded bolts included. Stainless steel screws.
Gear tray: E27
Protection level: IP54, Class I
|
|
|
BASE: Made out of GG-20 pearlitic cast iron, weighing 37 Kg. The 3 anchorage bolts are M-14 zinc-coated steel, 230 mm in length. DIFFUSOR PROTECTOR: Made of three 2 mm thick steel tubes, 48 mm in diameter, and 3 mm thick steel plate. COVER: In L-2520 cast aluminium. DIFFUSOR: 3 mm thick opal extruded methacrylate tube. NUTS AND BOLTS: In A4 stainless steel.
|
|
Neo-Prisma Steel
Steel sheet painted with oxiron anchored with threaded bolts to foundation 110 mm below finished ground level.
420: 150 kg / 320: 100 kg / 100: 35 kg.
All models with door for cable access in stainless aluminium alloy.
|
|
|
Enhancing the outdoor entrance and arrival areas of health centres, offices, businesses and residential hotels, etc, is essential. Kalank bollards provide this when combined with the size 2 recessed round luminaire of the same name. Kalank bollards come in a steel tube sturcture with a vandal-proof cast aluminium luminaire and polycarbonate diffuser, and a choice of 4 colours for the finish.
|
|
|
The aim of the Chartres bollards is to enhance outdoor arrival areas and gardens, and to mark out drives. The Chartres bollards can be combined with Chartres residential bulkhead lights. They are available in two heights 600 and 1200 mm. To personalize the lighted area even further, structures in the Chartres range can be fitted with oval, pyramid or size 1 round Chartres bulkhead lights.
|
|
BORNEO DIFFUSER
The materials used in the Paralume bollard make it suitable for installation in public and private gardens, on paths and allays, etc. 600 mm, 800, or 1050 mm high bollard light. aluminium alloy column. Caps are attached by slotted ovoid-head captive screws and fitted with clear polycarbonate diffuser with internal aluminium louvre.
|
|
There was a lighthouse on the island of Pharos off Alexandria. One of the seven wonders of the world. Its light might be seen from far away and guided ships to safety.
Light is life and liveliness. Worth heading for through darkness.
|
|
Strong visual coherence with the props Tempo, Rondo and the Pedestrian mast
- Choice between 3 sources of light
- Laminated Coating ACS (2 completions)
|
|
Atalaye
The ground luminaire Atalaye is designed for diverse landscape lighting applications, such as recessed wall and/or path light.
|
|
Crownlight meets the many demands of garden, park, entranceway and staircase
lighting.
|
|
Low lighting bollard with single or double lighting.
|
|
The bollard luminaire Doppio combines both upward and downward light.
|
|
|
Foldaway low Géo, out of brushed stainless steel. Height 1,1 m, Ø 140 or 206 Misters Equipée double d%u2019un refracting MTR® or d%u2019un reflectors, equipment 70 W SHP/IM and 80 W BF. Available in version prop anti-parking.
|
|
Foldaway low Géo, out of brushed stainless steel. Height 1,1 m, Ø 140 or
206 Misters Equipée with a refracting telescope MTR® or double reflectors,
equipment 70 W SHP/IM and 80 W BF. Available in version prop
anti-parking.
|
|
| ... products without information |
| |
|
|
