|
|
Model TECA offers a range of 14 different glasses, available in glossy finish and also in "Sablè" finish. Sablè glasses are opaque and are not subject to fingerprints and scratches.
The wood used for this composition is the "Natural Walnut" specially made by Tecnocucina, using different types of Italian walnuts.
|
|
A handleless kitchen with a unique shine. The high-gloss glass doors inlaid in real aluminium frames are imprinted on the back with a continuous wood grain.
DESIGN EXAMPLE: high-gloss palisander
CARCASE: graphite, side panels high-gloss palisander
WORKTOP: graphite finish
|
|
|
With this type of groove, it's also possible to use new materials of reduced thickness for the shelving, in line with the living areas. Such as White Glass, a mixture of glass and other resins, of compact appearance and with full colour, not transparent, presented her in a highly effective milk white shade.
|
|
|
Q2System form july in the Pedini Points Sale
|
|
|
|
|
|
Artematica Vitrum is a veritable cooking machine
The doors of Artematica Vitrum are constructed using a lightweight and resistant aluminium frame fitted with a matt or gloss glass front that can be coloured or simply etched. The worktop is also in toughened glass and supported by sturdy drawn aluminium bars. Glass is used for the side panel at the end of the island. Stainless steel is used on the side of the sink unit and on the rear of the island. Very thick volumes permit the top of the unit to be fitted with practical accessories such a dish-drainers, electric sockets, stainless steel bowls, weighing scales and a vacuum pump. The lower space, that is divided off by sheet steel, is suitable for the concealed running of plumbing and electric cables and for closing water and gas cocks from above. A 40 cm deep snack bar in wood to use for eating breakfast or a quick meal is installed alongside the element in glass and stainless steel so that all the materials are completely recyclable. The island hood with its stainless steel body is completed by front and vertical glass panels that have the scope of containing and conveying kitchen vapours and of protecting the wooden snack bar when cooking.
|
|
CRYSTALIA
Carefully selected materials, with their aesthetic and functional appeal, for Crystalia, the kitchen created from the effect produced by its doors in tempered and lacquered glass. Space becomes light as glass eliminates all heaviness.
The aluminum frame with stainless steel effect, the integrated handle and the central tempered lacquered glass, are its main strength.
The model is available in 13 colors. White, corn yellow, acid green, water green, rube red, chocolate, power blue, smoky gray, cobalt blue, cord gray, black and orange.
|
|
Being together in a Velvet kitchen. A mingling of more or less familiar feelings, form and substance of an interaction between space and colour, between the emotion aroused by touching new surfaces and the rationality of living in an eclectic environment. Velvet is a kitchen with a high technical-aesthetic impact, based on design criteria of ergonomic essentiality so that the kitchen units respond to the spontaneous actions of those working in it. Thanks
to the inimitable appeal of the glass, the durmast oak alternating with the lacquered surfaces, the wood finishes and exceptionally neat shapes, Velvet favours the style that matches modern living criteria with the functions required in a super kitchen. The humdrum of daily life thus becomes a refined
method of working that continues to be a favourite.
|
|
A rectangle provides the starting point. As a formal translation of a functional principle, it de-fines a frame within which the kitchen can be designed without constraints. Unlike the classic fitted kitchen, elements no longer need to be arranged side by side but can be positioned anywhere within the frame.
In various formats and individual additions, several frames create a modular system that permits a wide range of different uses. Wellbalanced proportions and dimensions in relation to space and the individual user create living environments which extend far beyond the kitchen as an area for working in.
|
|
|
|
|
|
Due to different demands on surfaces and sub constructions Lindner has developed wall panellings for any requests. Lindner offers you both standard wall panellings – standard wall panellings 900 – made of wooden building material or plasterboard building material, and metal wall panellings – metal wall panelling 910 - , glass wall panellings – glass wall panelling 920 – or aluminium wall panellings – aluminium wall panelling 930 - . These systems can be utilised not only as fully wall panellings but also as column panellings and post panellings.
Lindner Free wall claddings
Skillfully wrapped.
Lindner Free wall claddings transform every unfinished wall, pedestal or column into a real eye-catching architectural feature. They can be fully accessed for service and maintenance and can also be combined with functional properties, such as effective impact protection or outstanding soundproofing.
Lindner uses in-house manufactured steel panels with plasterboard inlays for metal solutions. Lindner is also more than happy to provide these high-quality products with effective soundproofing. You can transform your ideas into reality with a range of different finishes and colours - even with a classy real wood appearance finish.
Our wall claddings can be installed in different ways, either very close to or at a distance from the unfinished wall. This means that you can either save space or, alternatively, hide away building services and cabling – we would be pleased to advise you!
|
|
|
|
|
|
After years of intensive research and strict attention to work processes surrounding the Crystal line, a true masterpiece that has allowed the craft, through artificial crystallization, the growth of buds that stabilizes after a myriad of forms and colors.
The company's decision to channel initially this jewel in the furniture industry and the cover has led to the production and marketing of table tops, steps, slabs for floor and wall tiles and inserts of various kinds in the furniture industry.
The ability to be backlit and reflective characteristic of the crystal give the product unique applications and high aesthetic value, placing the high end of flooring and wall.
Boasting the "Made in Italy" and patented in 121 countries, captures the uniqueness and prestige thanks to the rigorous, manual that is followed throughout the growth phase of the crystal.
Currently, the structure of the slabs is composed of two panes of tempered extra-clear type interposed with polished stainless steel frame easily customizable in size and shape.
|
|
|
|
|
|
New concept floor and wall glass.
The wide range of photographic proposal, has no limit by being able to choose any high-definition images and reproduce it in various formats gives the panel an infinite scope of applications.
Imagine reproduce in large size and high quality a wall coating depicting a warm sea as the background of a massive hot tub.combined with a pavement reproducing the white sands of a stunning tropical beach.
Or look at a pavement depicting an aerial view of a city, a landscape or an ocean reproduced in large size in a particular reality and fantasy.
The high definition image will provide a strong visual impact and the plate glass gives extra gloss and transparency, giving the sense of depth.
The high hardness is ensured by a thermal process at high temperatures at which the glass is subjected only to be instantly cooled.
Following this process extra-defined tempered glass acquires a hardness three times the original glass with high bending strength and thermal shock.
Supplied in different thicknesses, with the possibility of a polyurethane backing which acts as an insulator and at the same time clinging to the glue-laying, the glass is supplied in any size up to the plate from 240cm x 120cm.
|
|
|
tela-design glass panels are available in various transparencies and depths with maximum sizes of 200 x 500 cm. As an additional feature panels can be equipped as a sound absorption means. Framing and sliding door systems are available according to project's specifications. Designs will be developed according to the project's requirements.
|
|
|
glass panels for bathroom decoration, windows, doors etc; prints of art (backpainted, (semi) transparant) in unique editions, made by Dutch artist/designer JOER. Custom made productions.
|
|
COLOREX, by projection of ink, partially dyes the glazing or on all its surface. These inks can be opaque, opals or translucent. We can also mix inks and apply them in range.
- Opaque COLOREX is intended for mural coatings and doors of wall cupboards.
- Opaque COLOREX & vision are recommended for partition-walls, doors of wall cupboards, flagstones of floor.
- COLOREX is recommended in application on a treatment MATEX in order to color engraving.
|
|
RECYCLED GLASS - AVAILABLE Q2
ABOUT :
New! Available Late Spring. Our glass is 98-100% recycled post-industrial content. Each panel contains glass aggregate that is custom formulated for colors not found in other aggregate materials. Our glass comes from crushed bottles, plates, windows, and other various products. Recycled Glass will be available in two aggragate sizes: #1 small and #2 large.
Lumicor's Recycled Glass decor is 98%-100% recycled post-industrial content or post-consumer content. Each panel contains glass aggregate that is custom formulated for colors not found in other aggregate materials. Our glass comes from crushed bottles, plates, windows, and other various products.
Add sparkle to your next design while maintaining high environmental standards.
|
|
Folding doors with frosted glass with a ceiling rail and adjustable doorjambs.
Screen divided into three sections.
SCREEN
Folding door with aluminium frame and frosted glass (All). Ceiling rail.
|
|
In a small room, the movement of a door or a cupboard door swinging open can take up too much space. Folding doors provide a perfect solution to this problem.
As a space-saving solution, a folding door is not only a very practical but also a very attractive alternative. There are many models available. Glass, wood or plastic; built up out of one or two parts - everything is possible. Our folding doors are suspended from a head rail. This means that your floor will not be obstructed by a floor guide.
Depending on your choice of folding door, the panels can be connected to each other by steel springs, wooden hinge frames or PVC profiles.
This makes our folding doors easy to use and ensures a smooth and easy operation and a long and problem-free life span.
|
|
MILO
AN IMAGE OF VERSATILITY. System of sliding, concealed sliding, folding or hinged in-line panels. Milo features an aluminium trim that can be anodised or finished in polished chrome, cherry, bleached or weng%uFFFD-stained oak, or lacquered white. The central panel is available in glass, with two sections if desired, or in wood, which can be lacquered. It is also available as a swing door, complete with locking mechanism.
|
|
MYWALL
DESIGN FOR CONTENTS. Furnishing system made up of wall-mounted panels and a series of accessory items that can be hooked onto the panels, positioned at any height and easily moved. Ideal for fitting out corner spaces. The panels are in flax-coloured laminate, while the accessories come in either bleached oak-coloured laminate or wenge-stained oak. Hardware is finished in an aluminium colour.
|
|
System in full tempered glass without any side profile, whose panels slide singularly on top and bottom track.
Single sliding and folding panels allow partial or complete opening, as well as the easy cleaning of the panel inside and outside, thanks to the 90° opening of each panel.
Aesthetically, Tuttovetro has zero impact on building sights and allows a complete panoramic sight,
|
|
Technal PPm sliding and folding doors
Three point deadlocks operated by Europrfile cylinder with top and bottom shoot bolts on closing leaf.
Any number of sliding leafs can be accommodated with any odd number sliding in any one direction.
Frame size of only 44mm with leafs mitred and cleated 34mm deep by 56mm wide
Maximum height of 2500mm with a leaf width of 900mm to give a maximum leaf weight of 45kg.
Glazing up to 22mm (usually a combination of 4mm and 6mm toughened glass with a 12mm cavity).
Solid aluminium extrusion (typical U-value of between 2.3 and 2.7 W/m2/K).
|
|
|
|
|
|
Due to different demands on surfaces and sub constructions Lindner has developed wall panellings for any requests. Lindner offers you both standard wall panellings – standard wall panellings 900 – made of wooden building material or plasterboard building material, and metal wall panellings – metal wall panelling 910 - , glass wall panellings – glass wall panelling 920 – or aluminium wall panellings – aluminium wall panelling 930 - . These systems can be utilised not only as fully wall panellings but also as column panellings and post panellings.
Lindner Free wall claddings
Skillfully wrapped.
Lindner Free wall claddings transform every unfinished wall, pedestal or column into a real eye-catching architectural feature. They can be fully accessed for service and maintenance and can also be combined with functional properties, such as effective impact protection or outstanding soundproofing.
Lindner uses in-house manufactured steel panels with plasterboard inlays for metal solutions. Lindner is also more than happy to provide these high-quality products with effective soundproofing. You can transform your ideas into reality with a range of different finishes and colours - even with a classy real wood appearance finish.
Our wall claddings can be installed in different ways, either very close to or at a distance from the unfinished wall. This means that you can either save space or, alternatively, hide away building services and cabling – we would be pleased to advise you!
|
|
|
|
|
|
After years of intensive research and strict attention to work processes surrounding the Crystal line, a true masterpiece that has allowed the craft, through artificial crystallization, the growth of buds that stabilizes after a myriad of forms and colors.
The company's decision to channel initially this jewel in the furniture industry and the cover has led to the production and marketing of table tops, steps, slabs for floor and wall tiles and inserts of various kinds in the furniture industry.
The ability to be backlit and reflective characteristic of the crystal give the product unique applications and high aesthetic value, placing the high end of flooring and wall.
Boasting the "Made in Italy" and patented in 121 countries, captures the uniqueness and prestige thanks to the rigorous, manual that is followed throughout the growth phase of the crystal.
Currently, the structure of the slabs is composed of two panes of tempered extra-clear type interposed with polished stainless steel frame easily customizable in size and shape.
|
|
|
|
|
|
New concept floor and wall glass.
The wide range of photographic proposal, has no limit by being able to choose any high-definition images and reproduce it in various formats gives the panel an infinite scope of applications.
Imagine reproduce in large size and high quality a wall coating depicting a warm sea as the background of a massive hot tub.combined with a pavement reproducing the white sands of a stunning tropical beach.
Or look at a pavement depicting an aerial view of a city, a landscape or an ocean reproduced in large size in a particular reality and fantasy.
The high definition image will provide a strong visual impact and the plate glass gives extra gloss and transparency, giving the sense of depth.
The high hardness is ensured by a thermal process at high temperatures at which the glass is subjected only to be instantly cooled.
Following this process extra-defined tempered glass acquires a hardness three times the original glass with high bending strength and thermal shock.
Supplied in different thicknesses, with the possibility of a polyurethane backing which acts as an insulator and at the same time clinging to the glue-laying, the glass is supplied in any size up to the plate from 240cm x 120cm.
|
|
|
tela-design glass panels are available in various transparencies and depths with maximum sizes of 200 x 500 cm. As an additional feature panels can be equipped as a sound absorption means. Framing and sliding door systems are available according to project's specifications. Designs will be developed according to the project's requirements.
|
|
|
glass panels for bathroom decoration, windows, doors etc; prints of art (backpainted, (semi) transparant) in unique editions, made by Dutch artist/designer JOER. Custom made productions.
|
|
COLOREX, by projection of ink, partially dyes the glazing or on all its surface. These inks can be opaque, opals or translucent. We can also mix inks and apply them in range.
- Opaque COLOREX is intended for mural coatings and doors of wall cupboards.
- Opaque COLOREX & vision are recommended for partition-walls, doors of wall cupboards, flagstones of floor.
- COLOREX is recommended in application on a treatment MATEX in order to color engraving.
|
|
|
|
see the results for the following category : 
