|
|
|
|
|
|
INVERSE on T-grid is the inverse solution of Tetral 15 ceiling,
made up modular panels laid into a 15 or 24 mm T-grids.
Thanks to its "П" shaped inverse profiles, 15 mm. wide, INVERSE provides
the best solution between functional and decorative purposes.
A simple solution for high style projects.
CE MARKED
FEATURES
INVERSE on T-grid features 600x600 mm modular panels, made up
of "П " - shaped blades 15 mm base and 40 mm height, which
suitably coupled form a square cell.
Cell sizes are available from 86x86 mm up to 150x150 mm.
The TETRÁL INVERSE on T-grid blades are made by BENDING SYSTEM, which gives: the accuracy of profiles and blades perfectly straight.
INVERSE on T-grid is supplied perforated. Standard perforation
patterns are hole 1,50 mm, 22% free opening, 3 mm pitch
hole 2,50 mm, 19%free opening, 5 mm pitch
The inner and outer of blades can be of same colour, or in
different colours for every decorative purpose.
Standard finishes inner orange RAL 2000 and outer silver RAL 9006
inner natural aluminium and outer black RAL 9005.
SUPPLY FORM
INVERSE on T-grid is usually supplied unassembled. Upon request, the
panels can also be supplied assembled.
FIRE REACTION
Ceir open cell ceilings are classified incombustible in compliance with international standards.
INSTALLATION
Specifically designed to fit into the standard suspension grid formed by T-15 or 24 mm. profiles, INVERSE on T-grid provides a trackless appearance of the ceiling. When the panel is laid into the suspension grid, the structure results fully integrated in the cell ceiling.
|
|
|
|
|
|
TETRÁL LINE
TETRÁL line is the linear solution of Tetrál b aluminium ceiling system, made up of modular panels which are fully downward demountable.
With thin and very decorative “U”-shaped lines, 5 or 10 mm wide, this product features parallel profiles hold by upper support bridges which placed over the panel will disappear when looking across the ceiling.
TETRÀL line is the perfect solution for every project requiring exclusive design
CE marked
FEATURES
TETRÁL line features 1200x600 mm modular panels, made of "U" blades with a base of 5 or 10 mm and height of 30/40 mm, which can be spaced at any interval (pitch) from 15 mm.
The modular panels, 1200x600 mm, are suspended from the concealed Delta suspension system.
TETRÁL line blades are made by BENDING SYSTEM, which gives:
the accuracy of profiles and blades perfectly straight.
A wide range of finishes either from pre-painted or post-painted aluminium is available, according to the RAL, NCS, PANTONE and SIKKENS colours.
HINGE-DOWN PERFECT AND EASY
Each panel is fully downward demountable and can remain hinged-down in the springs without being totally removed.
SUPPLY FORM
TETRÁL line is usually supplied unassembled. Upon request, the panels can also be supplied assembled.
FIRE REACTION
Ceir open cell ceilings are classified incombustible in compliance with international standards.
INSTALLATION
The concealed Delta suspension system allows for easy and fast placement or removal of TETRÁL line
The suspension system gives a trackless appearance and allows for demounting of the panels from below.
|
|
|
|
|
|
DESCRIPTION
With a solid position in the field of open cell ceiling for years now, the model BASE 15 is distinguished essentially by the composition of the panel, composed of elements with a greater visible surface and lateral closure profiles to rest on visible structure base 15.
TECHNICAL SPECIFICATIONS
False ceiling realised in pre-painted aluminium with a thickness of 0.5 mm. The load-bearing structure with a reverse-T cross section (Steel Strong Atena - Steel Strong Easy Base 15) constitutes a square mesh measuring 600x600 mm upon which will rest the grille panel composed of elements (TM and TF) with a U-shaped cross section with height 37.5 mm and base 15 mm which intersect with one another to form the desired mesh. The panel is supplied with a slotted lateral element to be inserted for the closure of the four sides of the grille created. The load-bearing structure will be hung from the ceiling using stiff suspension wires Ø4 adjusted by springs. On the edge, an edge profile will be applied, with an L-shaped or C-shaped section and in the same colour as the grille.
|
|
|
|
|
|
TETRÀL s15 & s24 are the aluminium open cell ceilings inspired in the classic wooden grid, made up of "U" shaped profiles with a width of 15 or 24 mm and height of 40/50 or 35 mm.
Specifically designed to fit into standard 15 or 24 mm wide T-grids, they provide a trackless appearance of the ceiling.
TETRÀL s15 & s24 are high quality products for easiest placement and removal of the panels.
CE Marked
FEATURES
TETRÀL s15 & s24 mm feature 600x600 mm modular panels, made up of "U" shaped profiles with 15 and 24 mm base, which suitably coupled form a square cell, to be inserted in a frame.
Cell sizes from 60x60 mm up to 300x300 mm.
Heights 30/40/50 mm (s15) and 35 mm (s24).
TETRÀL s15 & s24 blades are made by BENDING SYSTEM, which gives: the accuracy of profiles, more square edges and blades perfectly straight.
TETRÀL s15 & s24 mm can be supplied either plain or perforated, to achieve aesthetic and acoustic requirements.
Standard perforation patterns are as follows:
hole Ø 1,50 mm, 22% free opening, 3 mm pitch
hole Ø 2,50 mm, 19% free opening, 5 mm pitch.
A wide range of finishes either from pre-painted or post-painted aluminium is available, according to the RAL, NCS, PANTONE and SIKKENS colours.
|
|
DELTACEIR Line is the linear solution of Deltaceir aluminium ceiling system, made up of modular panels which are fUlly downward demountable.
With thin and very decorative lines, this product features parallel profiles hold by upper support bridges which placed over the panel will disappear when looking across the ceiling.
The perfect solution for every project requiring exclusive design. The closed shape of the blades drastically reduces the buildup of dust, and so the settling in the space of harmfull products to one's health.
CE marked
FEATURES
DELTACEIR Une features 1200x600 mm modular panels, made of closed profiles spaced at any interval (pitch) from 15 mm.
Profiles h30, 4 mm wide.
Profiles h20, 4 mm wide.
The modular panels, 1200x600 mm, are suspended from the concealed Delta suspension system Upon request, special modules are available: width up to 1200 mm and length up to 1800 mm.
|
|
|
|
|
|
GRIGLIATO: The FIRST alu open cell ceiling – A Classic Endless Style made in Italy
GRIGLIATO is by far the first open cell ceiling in aluminium.
It represents the endless fashion style thanks to the extraordinarly lightness of the blades.
The geometric and architectural design always makes GRIGLIATO an ultra modern open cell ceiling, perfect to enchange lighting and air distribution.
FEATURES
GRIGLIATO features 1200x600 mm modular panels, made of aluminium blades, which form square and/or rectangular cells with different dimensions and heights depending on your choice.
GRIGLIATO can be also supplied perforated, like in the picture.
GRIGLIATO is designed to be manufactured in Natural or Gold Anodised Aluminium, precious materials which adds value, both aesthetic and durability , to your open cell ceiling.
It can be set with a variety of finishes, starting from the standard pre-painted white or silver aluminium.
Easy to install,
GRIGLIATO is a CE marked product.
The ceir GRIGLIATO does not deteriorate, can be endlessy recycled and saves energy.
SEND Request Information for GRIGLIATO at ceir@ceir.com
EXCLUSIVELY PRODUCED&DISTRIBUTED BY:
CEIR THE ALU OPEN CELL CEILINGS
Caselle di Selvazzano ITALY 35030 • tel. +39.049.630 779
Email: ceir@ceir.com
|
|
|
|
|
|
REFLEX: THE TOP LIGHTING OPEN CELL CEILING
REFLEX IS THE IDEAL OPEN CELL CEILING TO LIGHT YOUR SPACES.
Thanks to its parabolic shape (with angle of view of 34°) and by antiridescent semi-specular Extra-Pure Anodised Aluminium, REFLEX enchanges the efficency of lighting avoiding any "rainbow" effect.
It is the open cell ceiling most chosen by our customer for its EXECELLENT LIGHTING FEATURES, because it PREVENTS ANY GLARE DIRECT AND INDIRECT
FEATURES
REFLEX features 800x800 or 1200x600 mm modular panels, made of “V” shaped aluminium blades, which form square cells.
REFLEX is available in two versions:
MINI Reflex with profiles high 30 mm., and
MAXI Reflex with profiles high 100 mm.
REFLEX is designed to be in Antiridescent Semi-Specular Extra-Pure Anodised Aluminium, precious material which adds aesthetic and long-lasting value to your open cell ceiling.
It can be also set with a variety of finishes, starting from the standard pre-painted white or silver aluminium.
Easy to install.
REFLEX is a CE marked product.
REFLEX does not deteriorate, can be endlessy recycled and saves energy.
SEND Request Information for REFLEX at ceir@ceir.com
EXCLUSIVELY PRODUCED&DISTRIBUTED BY:
CEIR THE ALU OPEN CELL CEILINGS
Caselle di Selvazzano ITALY 35030 • tel. +39.049.630 779
Email: ceir@ceir.com
|
|
Our open-cell ceilings help define a space and create interesting shadows and lighting effects. Available in a range of sizes and colours, our cell ceilings provide a plenum mask that emphasizes creativity. We offer two open cell ceilings: Cell systems, a fully flexible, modular system Cell tiles, a standard-sized product
Cell systems create a spacious appearance ideal for spaces where open, light constructions are desired. These systems make it easy to create different modules in one ceiling.
• Sliding Clip, hook-in or swing-down system
• Modules from 50 x 50 to 200 x 300 mm
• Cell heights from 22 to 56 mm
• Options for very small plenum depths
• Design combinations of cell 22 and 50 are possible Cell tiles are open
ceilings with a modern, distinctive character. The tiles are suitable for
the universal T-grid system.
• T-grid suspension system
• Tiles 600 x 600 mm or 600 x 1200 mm
• Four different designs for Unigrid
• Lay-on, Lay-in or concealed
|
|
|
|
|
|
Electrogalvanized steel panels, th. 0,6 - 0,7 - 0,8 mm, rectangular shape: width from 300 to 600 mm and length up to mm 1900 - square shape: up to 1170x1170 mm. As an alternative, grated panels Alugrid with customised sizes.
Electrogalvanized steel structure th. 1 mm, standard width 100 and 200 mm and length up to 1900 mm. Crossing links in standard sizes: 100x100 mm and 200x200 mm (side drawings of link-structure-panel unit).
Powder painting 70-80 microns.
Standard col. Ral 9010.
Minimum air space overall dimensions: mm. 100.
Flexibility: it allows for the composition of a pratically andless number of units, with aquare or rectangular panels, with straight or chamfered edges.
Simple and quick installation.
Full inspection of the false ceiling and easy access to the air space, without any tool.
Comlement lighting fixtures, both in panels and structure.
Location of partitioning walls under the structural elements, acting as counterpush.
Sound-proofing:
horizontal, by the insertion of soundproof panels on the whole surface of the false ceiling.
Vertical: by inserting plaster/paper sound-proof baffles at the walls.
Acoustic absorption:
different holes (see table) are available to the purpose, making the false ceiling soundproof together with soundproofing materials: specially suitable is the black Soundtex "paper tissue" film that dramatically reduces reverberation time and noise levels in general (see acoustic certifications).
|
|
|
A square ceiling tile in imitation oak with an arabesque-inspired Design.
|
|
PROMETAL® open cell ceilings are particularly suitable for entrances, large public areas, shopping centres, etc.
Smokes can be extracted through the grid design, which also hides the relevant systems and at the same time provides a uninterrupted, uniform overall look.
|
|
Type F.
It is a strong stiff wire cloth. It has a relatively flat surface allowing for excellent light reflection.
|
|
|
The U-profiles, orthogonally fitted, form modular panel to be inserted in a main structure and perfecly integrated in the ceiling. U-RASTER can be supplied with a central bevelling in the lover section of the U-profiles. U-RASTER can be supplied in large range of standard celles and, on request, produced in various cell dimensions.
|
|
|
The U-profiles, orthogonally fitted, form modular panel to be inserted in a main structure and perfecly integrated in the ceiling. Maxi U-RASTER reduces overall dimensions and transport to a minimum by assuring the best yield. Maxi U-RASTER can be supplied with a central bevelling in the lower section of the U-profiles. Maxi U-RASTER can be supplied in a large range of standard cells and, on request, produced in various dimensions.
|
|
Folding technology, bending technology and domes for innovative cover organization.
Prefabricated elements with V-milling as folding technology, curved plates, form disk elements and parallel slitting as bending technology, kits for domes.
|
|
Thickness:
up to 2.5mm in aluminium and 1.5 mm in steel
Supplied:
in metal plates in different formats made-to-measure.
Dimensions:
different formats made-to-measure. Discs, segments, margins and special shapes..
Materials:
Carbon steels; zinc-coated;
aluminium...
Finishes and coatings:
lacquering (RAL colours; textured; other special products...)
Anodized: metallic / organic
Hot and cold galvanising.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
