|
|
A mixed roof tile ot double curvature, where eaves and ridge tile bring together design and functionality to provide easy-to-install roofs with the special beauty of Arab roofs.
Made in intense red. there Is a great variety of finishes to enable new buildings to blend in perfectly with the old constructions.
A roof tile conceived to satisfy the needs and preferences of all professionals, available in two sizes with a large variety of complements to guarantee timeless.
|
|
Mediterranean essence. A mixed roof tile in white body that brings together the whole taste of the Mediterranean. Manufactured from a careful selection of white clays that are dry grinded to achieve a clean roof tile with a colour uniformity previously unheard of.
Perfect for sunny areas inland and close to the sea. Available in two sizes and with the exclusive double curvature of La Escandella mixed roof tiles.
|
|
Traditionally, this has been the root tile most used across the whole of Spain and is reused in new buildingsdue to the beauty of its colour, achieved with the natural passing of time.
Available in three sizes and a large number of finishes on white and red clays, these are the curved roof tiles that best adapt to the new buildings where it is hoped to conserve the taste of the old without breaking the line of traditional scenery. A curved 40 x 15 roof tile with a more pronounced curvature particularly recommended for fitting to asbestos cement plates.
|
|
PLANUM. Its design and size make easier the installation and reduce its laying cost. Planum Roof Tile, available in several colours and finishes, is a solution where aesthetical and functionality are joining together in order to build roofs with the last trends in architecture.
A new developed tile which is keeping the gist of a traditional material but adapted to the modern architectural language of nowadays.
|
|
VISUM3 is a patented interlocking tile with an innovative triple cambered design that gives the appearance of three traditional plain tiles side by side when laid.
Because its triple exclusive decoration system, VISUM3 offers a broader range in tones and hues, so that no two tiles will appear exactly the same.
VISUM3 has a lower installation cost than other products, with the high quality terracotta standards of La Escandella.
|
|
PLANUM. Its design and size make easier the installation and reduce its laying cost. Planum Roof Tile, available in several colours and finishes, is a solution where aesthetical and functionality are joining together in order to build roofs with the last trends in architecture.
A new developed tile which is keeping the gist of a traditional material but adapted to the modern architectural language of nowadays.
|
|
VISUM3 is a patented interlocking tile with an innovative triple cambered design that gives the appearance of three traditional plain tiles side by side when laid.
Because its triple exclusive decoration system, VISUM3 offers a broader range in tones and hues, so that no two tiles will appear exactly the same.
VISUM3 has a lower installation cost than other products, with the high quality terracotta standards of La Escandella.
|
|
A kind of root tile that keeps alive the spirit of these notable buildings.
Adapted to today's construction needs, the roof tiles are larger pieces, which means that the cost of installation and materials is significantly reduced without compromising the elegance and durability of the roofs made with these kinds of roof tiles.
Versatile and easy to fit, especially when dry, as it can be fitted by forming columns or using the meeting joint system. The roof tile has a semi-
perforated hole for nailing and another on the rear to make it easier to tie to the battens.
|
|
VISUM3 is a patented interlocking tile with an innovative triple cambered design that gives the appearance of three traditional plain tiles side by side when laid.
Because its triple exclusive decoration system, VISUM3 offers a broader range in tones and hues, so that no two tiles will appear exactly the same.
VISUM3 has a lower installation cost than other products, with the high quality terracotta standards of La Escandella.
|
|
VISUM3 COLONIAL GREEN is a patented interlocking tile with an innovative triple cambered design that gives the appearance of three traditional plain tiles side by side when laid.
Because its triple exclusive decoration system, VISUM3 offers a broader range in tones and hues, so that no two tiles will appear exactly the same.
VISUM3 has a lower installation cost than other products, with the high quality terracotta standards of La Escandella.
|
|
VISUM3 RUSSET is a patented interlocking tile with an innovative triple cambered design that gives the appearance of three traditional plain tiles side by side when laid.
Because its triple exclusive decoration system, VISUM3 offers a broader range in tones and hues, so that no two tiles will appear exactly the same.
VISUM3 has a lower installation cost than other products, with the high quality terracotta standards of La Escandella.
|
|
VISUM3 GREY IDELLA is a patented interlocking tile with an innovative triple cambered design that gives the appearance of three traditional plain tiles side by side when laid.
Because its triple exclusive decoration system, VISUM3 offers a broader range in tones and hues, so that no two tiles will appear exactly the same.
VISUM3 has a lower installation cost than other products, with the high quality terracotta standards of La Escandella.
|
|
VISUM3 GREY VERMONT is a patented interlocking tile with an innovative triple cambered design that gives the appearance of three traditional plain tiles side by side when laid.
Because its triple exclusive decoration system, VISUM3 offers a broader range in tones and hues, so that no two tiles will appear exactly the same.
VISUM3 has a lower installation cost than other products, with the high quality terracotta standards of La Escandella.
|
|
PLANUM. Its design and size make easier the installation and reduce its laying cost. Planum Roof Tile, available in several colours and finishes, is a solution where aesthetical and functionality are joining together in order to build roofs with the last trends in architecture.
A new developed tile which is keeping the gist of a traditional material but adapted to the modern architectural language of nowadays.
|
|
PLANUM. Its design and size make easier the installation and reduce its laying cost. Planum Roof Tile, available in several colours and finishes, is a solution where aesthetical and functionality are joining together in order to build roofs with the last trends in architecture.
A new developed tile which is keeping the gist of a traditional material but adapted to the modern architectural language of nowadays.
|
|
|
|
|
|
ADVANTAGES
These are medium-sized tiles, of excellent proportions, which achieve an aesthetic effect in itself very similar to the traditional Portuguese roofs (concave tile).
They are rather easy to lay and there is a vast range of accessories available, which enables a good adjustment to any kind of architectural style, i.e., modern or traditional.
This model comes naturally from the previous model Portuguese T Plus, already known by its qualities such as:
Resistence, this is due to the high baking temperature (about 1050 ºC);
Fine Colour, because of both the careful selection of pulp and the high baking temperature;
Excellent final aesthetic effect, because of both the careful selection of pulp and the high baking temperature;
The new model has other advantages apart from those mentioned above:
Less number of tiles required for each square metre (12,3 tiles/m2 as opposed to 13,2 tiles/m2 in the previous tiles), which naturally reduces the costs of each square metre;
He fittings have a better longitudinal and transversal clearance enabling a less demanding size of the chantlate, in terms of angle plate and distance between the shingles. Thus, it also means less labour force needed because the working time needed is also less;
Quicker laying, due to the two aspects mentioned before and, consequently, the costs for each square metre are reduced;
A wind-mill is set on the top of the concave tile which intends to conceal the "collar" of the previous tile. A better visual effect is therefore achieved;
|
|
|
|
|
|
ADVANTAGES
These are medium-sized tiles, of excellent proportions, which achieve an aesthetic effect in itself very similar to the traditional Portuguese roofs (concave tile).
They are rather easy to lay and there is a vast range of accessories available, which enables a good adjustment to any kind of architectural style, i.e., modern or traditional.
This model comes naturally from the previous model Portuguese T Plus, already known by its qualities such as:
Resistence, this is due to the high baking temperature (about 1050 ºC);
Fine Colour, because of both the careful selection of pulp and the high baking temperature;
Excellent final aesthetic effect, because of both the careful selection of pulp and the high baking temperature;
The new model has other advantages apart from those mentioned above:
Less number of tiles required for each square metre (12,3 tiles/m2 as opposed to 13,2 tiles/m2 in the previous tiles), which naturally reduces the costs of each square metre;
He fittings have a better longitudinal and transversal clearance enabling a less demanding size of the chantlate, in terms of angle plate and distance between the shingles. Thus, it also means less labour force needed because the working time needed is also less;
Quicker laying, due to the two aspects mentioned before and, consequently, the costs for each square metre are reduced;
A wind-mill is set on the top of the concave tile which intends to conceal the "collar" of the previous tile. A better visual effect is therefore achieved;
|
|
ADVANTAGES
As a result of 45yeares of experience and success, margon tried to ally the advantages of state-of-art technology to traditional aesthetics. From these two concepts resulted roof-tile ibérica.
ECONOMIC APLICATION
12,8 roof-tiles/m2 (white the canal roof-tile usually needs an average of 32 roof-tiles/m2)
EASY APLICATION
Quickly placed without requiring extra care when fixing the roof-tiles and foregoing extra insulation material (contrary to the canal roof-tile requirements)
SAFE APLICATION
Fixation to the lath work using safety bolts, double protection friezes against contingent infiltrations, recovering of yhe most sensitive points to occasionl infiltration.
|
|
|
|
|
|
ADVANTAGES
These are medium-sized tiles, of excellent proportions, which achieve an aesthetic effect in itself very similar to the traditional Portuguese roofs (concave tile).
They are rather easy to lay and there is a vast range of accessories available, which enables a good adjustment to any kind of architectural style, i.e., modern or traditional.
This model comes naturally from the previous model Portuguese T Plus, already known by its qualities such as:
Resistence, this is due to the high baking temperature (about 1050 ºC);
Fine Colour, because of both the careful selection of pulp and the high baking temperature;
Excellent final aesthetic effect, because of both the careful selection of pulp and the high baking temperature;
The new model has other advantages apart from those mentioned above:
Less number of tiles required for each square metre (12,3 tiles/m2 as opposed to 13,2 tiles/m2 in the previous tiles), which naturally reduces the costs of each square metre;
He fittings have a better longitudinal and transversal clearance enabling a less demanding size of the chantlate, in terms of angle plate and distance between the shingles. Thus, it also means less labour force needed because the working time needed is also less;
Quicker laying, due to the two aspects mentioned before and, consequently, the costs for each square metre are reduced;
A wind-mill is set on the top of the concave tile which intends to conceal the "collar" of the previous tile. A better visual effect is therefore achieved;
|
|
|
|
|
|
ADVANTAGES
These are medium-sized tiles, of excellent proportions, which achieve an aesthetic effect in itself very similar to the traditional Portuguese roofs (concave tile).
They are rather easy to lay and there is a vast range of accessories available, which enables a good adjustment to any kind of architectural style, i.e., modern or traditional.
This model comes naturally from the previous model Portuguese T Plus, already known by its qualities such as:
Resistence, this is due to the high baking temperature (about 1050 ºC);
Fine Colour, because of both the careful selection of pulp and the high baking temperature;
Excellent final aesthetic effect, because of both the careful selection of pulp and the high baking temperature;
The new model has other advantages apart from those mentioned above:
Less number of tiles required for each square metre (12,3 tiles/m2 as opposed to 13,2 tiles/m2 in the previous tiles), which naturally reduces the costs of each square metre;
He fittings have a better longitudinal and transversal clearance enabling a less demanding size of the chantlate, in terms of angle plate and distance between the shingles. Thus, it also means less labour force needed because the working time needed is also less;
Quicker laying, due to the two aspects mentioned before and, consequently, the costs for each square metre are reduced;
A wind-mill is set on the top of the concave tile which intends to conceal the "collar" of the previous tile. A better visual effect is therefore achieved;
|
|
|
|
|
|
ADVANTAGES
These are medium-sized tiles, of excellent proportions, which achieve an aesthetic effect in itself very similar to the traditional Portuguese roofs (concave tile).
They are rather easy to lay and there is a vast range of accessories available, which enables a good adjustment to any kind of architectural style, i.e., modern or traditional.
This model comes naturally from the previous model Portuguese T Plus, already known by its qualities such as:
Resistence, this is due to the high baking temperature (about 1050 ºC);
Fine Colour, because of both the careful selection of pulp and the high baking temperature;
Excellent final aesthetic effect, because of both the careful selection of pulp and the high baking temperature;
The new model has other advantages apart from those mentioned above:
Less number of tiles required for each square metre (12,3 tiles/m2 as opposed to 13,2 tiles/m2 in the previous tiles), which naturally reduces the costs of each square metre;
He fittings have a better longitudinal and transversal clearance enabling a less demanding size of the chantlate, in terms of angle plate and distance between the shingles. Thus, it also means less labour force needed because the working time needed is also less;
Quicker laying, due to the two aspects mentioned before and, consequently, the costs for each square metre are reduced;
A wind-mill is set on the top of the concave tile which intends to conceal the "collar" of the previous tile. A better visual effect is therefore achieved;
|
|
ADVANTAGES
As a result of 45yeares of experience and success, margon tried to ally the advantages of state-of-art technology to traditional aesthetics. From these two concepts resulted roof-tile ibérica.
ECONOMIC APLICATION
12,8 roof-tiles/m2 (white the canal roof-tile usually needs an average of 32 roof-tiles/m2)
EASY APLICATION
Quickly placed without requiring extra care when fixing the roof-tiles and foregoing extra insulation material (contrary to the canal roof-tile requirements)
SAFE APLICATION
Fixation to the lath work using safety bolts, double protection friezes against contingent infiltrations, recovering of yhe most sensitive points to occasionl infiltration.
|
|
|
|
|
|
ADVANTAGES
These are medium-sized tiles, of excellent proportions, which achieve an aesthetic effect in itself very similar to the traditional Portuguese roofs (concave tile).
They are rather easy to lay and there is a vast range of accessories available, which enables a good adjustment to any kind of architectural style, i.e., modern or traditional.
This model comes naturally from the previous model Portuguese T Plus, already known by its qualities such as:
Resistence, this is due to the high baking temperature (about 1050 ºC);
Fine Colour, because of both the careful selection of pulp and the high baking temperature;
Excellent final aesthetic effect, because of both the careful selection of pulp and the high baking temperature;
The new model has other advantages apart from those mentioned above:
Less number of tiles required for each square metre (12,3 tiles/m2 as opposed to 13,2 tiles/m2 in the previous tiles), which naturally reduces the costs of each square metre;
He fittings have a better longitudinal and transversal clearance enabling a less demanding size of the chantlate, in terms of angle plate and distance between the shingles. Thus, it also means less labour force needed because the working time needed is also less;
Quicker laying, due to the two aspects mentioned before and, consequently, the costs for each square metre are reduced;
A wind-mill is set on the top of the concave tile which intends to conceal the "collar" of the previous tile. A better visual effect is therefore achieved;
|
|
|
|
|
|
ADVANTAGES
These are medium-sized tiles, of excellent proportions, which achieve an aesthetic effect in itself very similar to the traditional Portuguese roofs (concave tile).
They are rather easy to lay and there is a vast range of accessories available, which enables a good adjustment to any kind of architectural style, i.e., modern or traditional.
This model comes naturally from the previous model Portuguese T Plus, already known by its qualities such as:
Resistence, this is due to the high baking temperature (about 1050 ºC);
Fine Colour, because of both the careful selection of pulp and the high baking temperature;
Excellent final aesthetic effect, because of both the careful selection of pulp and the high baking temperature;
The new model has other advantages apart from those mentioned above:
Less number of tiles required for each square metre (12,3 tiles/m2 as opposed to 13,2 tiles/m2 in the previous tiles), which naturally reduces the costs of each square metre;
He fittings have a better longitudinal and transversal clearance enabling a less demanding size of the chantlate, in terms of angle plate and distance between the shingles. Thus, it also means less labour force needed because the working time needed is also less;
Quicker laying, due to the two aspects mentioned before and, consequently, the costs for each square metre are reduced;
A wind-mill is set on the top of the concave tile which intends to conceal the "collar" of the previous tile. A better visual effect is therefore achieved;
|
|
ADVANTAGES
As a result of 45yeares of experience and success, margon tried to ally the advantages of state-of-art technology to traditional aesthetics. From these two concepts resulted roof-tile ibérica.
ECONOMIC APLICATION
12,8 roof-tiles/m2 (white the canal roof-tile usually needs an average of 32 roof-tiles/m2)
EASY APLICATION
Quickly placed without requiring extra care when fixing the roof-tiles and foregoing extra insulation material (contrary to the canal roof-tile requirements)
SAFE APLICATION
Fixation to the lath work using safety bolts, double protection friezes against contingent infiltrations, recovering of yhe most sensitive points to occasionl infiltration.
|
|
|
|
|
|
ADVANTAGES
These are medium-sized tiles, of excellent proportions, which achieve an aesthetic effect in itself very similar to the traditional Portuguese roofs (concave tile).
They are rather easy to lay and there is a vast range of accessories available, which enables a good adjustment to any kind of architectural style, i.e., modern or traditional.
This model comes naturally from the previous model Portuguese T Plus, already known by its qualities such as:
Resistence, this is due to the high baking temperature (about 1050 ºC);
Fine Colour, because of both the careful selection of pulp and the high baking temperature;
Excellent final aesthetic effect, because of both the careful selection of pulp and the high baking temperature;
The new model has other advantages apart from those mentioned above:
Less number of tiles required for each square metre (12,3 tiles/m2 as opposed to 13,2 tiles/m2 in the previous tiles), which naturally reduces the costs of each square metre;
He fittings have a better longitudinal and transversal clearance enabling a less demanding size of the chantlate, in terms of angle plate and distance between the shingles. Thus, it also means less labour force needed because the working time needed is also less;
Quicker laying, due to the two aspects mentioned before and, consequently, the costs for each square metre are reduced;
A wind-mill is set on the top of the concave tile which intends to conceal the "collar" of the previous tile. A better visual effect is therefore achieved;
|
|
ADVANTAGES
As a result of 45yeares of experience and success, margon tried to ally the advantages of state-of-art technology to traditional aesthetics. From these two concepts resulted roof-tile ibérica.
ECONOMIC APLICATION
12,8 roof-tiles/m2 (white the canal roof-tile usually needs an average of 32 roof-tiles/m2)
EASY APLICATION
Quickly placed without requiring extra care when fixing the roof-tiles and foregoing extra insulation material (contrary to the canal roof-tile requirements)
SAFE APLICATION
Fixation to the lath work using safety bolts, double protection friezes against contingent infiltrations, recovering of yhe most sensitive points to occasionl infiltration.
|
|
|
|
|
|
ADVANTAGES
These are medium-sized tiles, of excellent proportions, which achieve an aesthetic effect in itself very similar to the traditional Portuguese roofs (concave tile).
They are rather easy to lay and there is a vast range of accessories available, which enables a good adjustment to any kind of architectural style, i.e., modern or traditional.
This model comes naturally from the previous model Portuguese T Plus, already known by its qualities such as:
Resistence, this is due to the high baking temperature (about 1050 ºC);
Fine Colour, because of both the careful selection of pulp and the high baking temperature;
Excellent final aesthetic effect, because of both the careful selection of pulp and the high baking temperature;
The new model has other advantages apart from those mentioned above:
Less number of tiles required for each square metre (12,3 tiles/m2 as opposed to 13,2 tiles/m2 in the previous tiles), which naturally reduces the costs of each square metre;
He fittings have a better longitudinal and transversal clearance enabling a less demanding size of the chantlate, in terms of angle plate and distance between the shingles. Thus, it also means less labour force needed because the working time needed is also less;
Quicker laying, due to the two aspects mentioned before and, consequently, the costs for each square metre are reduced;
A wind-mill is set on the top of the concave tile which intends to conceal the "collar" of the previous tile. A better visual effect is therefore achieved;
|
|
CHARACTERISTICS:
Mumber of roof-tiles/m2: 12,8
Unit eight: 3,6 kg
Units per pallet: 300 units
Distance between supports: 37,4 cm / 37,0*
*Ibérica Ultra
|
|
|
|
