|
|
ADVANTAGES
As a result of 45yeares of experience and success, margon tried to ally the advantages of state-of-art technology to traditional aesthetics. From these two concepts resulted roof-tile ibérica.
ECONOMIC APLICATION
12,8 roof-tiles/m2 (white the canal roof-tile usually needs an average of 32 roof-tiles/m2)
EASY APLICATION
Quickly placed without requiring extra care when fixing the roof-tiles and foregoing extra insulation material (contrary to the canal roof-tile requirements)
SAFE APLICATION
Fixation to the lath work using safety bolts, double protection friezes against contingent infiltrations, recovering of yhe most sensitive points to occasionl infiltration.
|
|
|
|
|
|
ADVANTAGES
These are medium-sized tiles, of excellent proportions, which achieve an aesthetic effect in itself very similar to the traditional Portuguese roofs (concave tile).
They are rather easy to lay and there is a vast range of accessories available, which enables a good adjustment to any kind of architectural style, i.e., modern or traditional.
This model comes naturally from the previous model Portuguese T Plus, already known by its qualities such as:
Resistence, this is due to the high baking temperature (about 1050 ºC);
Fine Colour, because of both the careful selection of pulp and the high baking temperature;
Excellent final aesthetic effect, because of both the careful selection of pulp and the high baking temperature;
The new model has other advantages apart from those mentioned above:
Less number of tiles required for each square metre (12,3 tiles/m2 as opposed to 13,2 tiles/m2 in the previous tiles), which naturally reduces the costs of each square metre;
He fittings have a better longitudinal and transversal clearance enabling a less demanding size of the chantlate, in terms of angle plate and distance between the shingles. Thus, it also means less labour force needed because the working time needed is also less;
Quicker laying, due to the two aspects mentioned before and, consequently, the costs for each square metre are reduced;
A wind-mill is set on the top of the concave tile which intends to conceal the "collar" of the previous tile. A better visual effect is therefore achieved;
|
|
CHARACTERISTICS:
Mumber of roof-tiles/m2: 12,8
Unit eight: 3,6 kg
Units per pallet: 300 units
Distance between supports: 37,4 cm / 37,0*
*Ibérica Ultra
|
|
|
Its large coverage surface makes it especially economical. Due to a tile weight of only 4.0 kg, these tiles can be laid quickly and easily. A robust and rustic ceramic roof.
|
|
|
|
|
|
ADVANTAGES
Their flat shape with a double channel enables them to be highly impervious to wind and rain, hindering eventual whirls caused by mighty rivers in periods of heavy rain as well as tree leaves and other things brought by the wind.
Their traditional design of fine proportions maintains the beauty of old Portuguese roofs. So, French gutter tiles are those chosen to restore roofs from old houses.
This model has the following advantages:
Resistence: this is due to the high baking temperature (about 1050 ºC);
Fine Colour: because of both the careful selection of pulp and the high baking temperature;
Traditional aesthetic effect, which is achieved from a design of fine proportions in order to reproduce the beauty of old Portuguese roofs.
Better imperviousness due to the kind of fitting. This enables one to obtain a "closer" roof (if compared to the Normal Portuguese tile model), which is especially advantageous in slabless roofs;
Quicker laying due to the shape of the fitting. It also means less costs for each m2 laid;
There are two different ways to lay these kind of tiles, since they have been carefully designed to allow to make the roof either with aligned courses or courses which go different ways. In both cases the result is a perfect fitting.
|
|
|
|
|
|
ADVANTAGES
Their flat shape with a double channel enables them to be highly impervious to wind and rain, hindering eventual whirls caused by mighty rivers in periods of heavy rain as well as tree leaves and other things brought by the wind.
Their traditional design of fine proportions maintains the beauty of old Portuguese roofs. So, French gutter tiles are those chosen to restore roofs from old houses.
This model has the following advantages:
Resistence: this is due to the high baking temperature (about 1050 ºC);
Fine Colour: because of both the careful selection of pulp and the high baking temperature;
Traditional aesthetic effect, which is achieved from a design of fine proportions in order to reproduce the beauty of old Portuguese roofs.
Better imperviousness due to the kind of fitting. This enables one to obtain a "closer" roof (if compared to the Normal Portuguese tile model), which is especially advantageous in slabless roofs;
Quicker laying due to the shape of the fitting. It also means less costs for each m2 laid;
There are two different ways to lay these kind of tiles, since they have been carefully designed to allow to make the roof either with aligned courses or courses which go different ways. In both cases the result is a perfect fitting.
|
|
Smooth. Pure. Consistent. A linear aesthetic for contemporary architecture. It is hardened and tempered in a special sintering process at approximately 1200°C. This lends the tile special resistance qualities against aggressive environmental influences.
- Requirement per m²: from 10 pieces
- standard roof slope: 25°.
|
|
|
|
|
|
ADVANTAGES
Their flat shape with a double channel enables them to be highly impervious to wind and rain, hindering eventual whirls caused by mighty rivers in periods of heavy rain as well as tree leaves and other things brought by the wind.
Their traditional design of fine proportions maintains the beauty of old Portuguese roofs. So, French gutter tiles are those chosen to restore roofs from old houses.
This model has the following advantages:
Resistence: this is due to the high baking temperature (about 1050 ºC);
Fine Colour: because of both the careful selection of pulp and the high baking temperature;
Traditional aesthetic effect, which is achieved from a design of fine proportions in order to reproduce the beauty of old Portuguese roofs.
Better imperviousness due to the kind of fitting. This enables one to obtain a "closer" roof (if compared to the Normal Portuguese tile model), which is especially advantageous in slabless roofs;
Quicker laying due to the shape of the fitting. It also means less costs for each m2 laid;
There are two different ways to lay these kind of tiles, since they have been carefully designed to allow to make the roof either with aligned courses or courses which go different ways. In both cases the result is a perfect fitting.
|
|
Technical information
Length
461 mm
Width
275 mm
Weight
3,8 kg
Weight/m2
41,8 kg
Units/m2
11
|
|
TB-10 SAND
A unique family of tiles with patented relief and textures that make them exclusive.
|
|
TB-12 VILLA LAMALOU
Our family of classic and new classics. Roofs that evoke natural colors, colors lifelong. Roof tiles from nature.
|
|
Characteristics:
Length: 47,5 cm *
Width: 25,8 cm *
Weight: 3 kg.
Units/m2: 11,84 uds.*
(*) Theoretic value
|
|
TB-12 VILATERRA
Our family of classic and new classics. Roofs that evoke natural colors, colors lifelong. Roof tiles from nature.
|
|
TB-4 IRISADO GREEN
Roof tiles with unique characteristics for every roof: they prevent premature ageing, they are absolutely impermeable and they hold back the growth of mould and moss.
|
|
TB-12 VILLA BIDASOA
Our family of classic and new classics. Roofs that evoke natural colors, colors lifelong. Roof tiles from nature.
|
|
TB-12 VILLA MAHURY
Our family of classic and new classics. Roofs that evoke natural colors, colors lifelong. Roof tiles from nature.
|
|
Technical information
Length
404 mm
Max Width:
202 mm
Min Width:
165 mm
Weight/m2
2,2 kg
Units/m2
28
|
|
CENTENARIA GROUND
A unique family of tiles with patented relief and textures that make them exclusive.
|
|
GLAZED COBALT BLUE
Roof tiles with unique characteristics for every roof: they prevent premature ageing, they are absolutely impermeable and they hold back the growth of mould and moss.
|
|
Technical information
Length
452 mm
Width
275 mm
Weight
3,2 kg
Weight/m2
35,2 kg
Units/m2
11
|
|
Characteristics:
Length: 40,7 cm *
Width: 27,9 cm *
Weight: 3,5 kg.
Units/m2: 12 uds.*
(*) Theoretic value
|
|
|
|
see the results for the following category : 
