|
|
Specifications:
1)Paticle board(plain/melamine)
2) Dimensions: 1,220 x 2,440mm
3) Thickness: >12mm
4) Glue: E0, E1
5) We can produce according to customers' specifications
6) Widely used for different uses
|
|
The quality of Fantoni chipboard is due mainly to the exclusive use of particles of new wood, which are mixed with resins produced in the Fantoni factories and then hot-pressed.
A special process distributes large particles to the centre of the board and smaller particles on the surfaces: these give the panels an improved surface finish as well as increased performance characteristics. All products, and in particular "special" products, such as moisture-resistant chipboard, are continually subjected to performance tests.
|
|
|
High-density board with sanded or unsanded surface, provided with a special oblique tongue profile on four sides. The tongue profile ensures high stability and easy installation and allows blind nailing or screwing of the panels.
|
|
Scope
Standard board for general use in dry conditions.
Description
Standard chipboard with unsanded, smooth and hard surface.
|
|
|
Board for interior and furniture construction with sanded, fine surface and particularly screwable core, glued with melamine reinforced UF glue. The board undergoes minimal expansion and is suitable for applications in dry conditions. Naturspan 3 Star can be refined with paper, melamine, veneer or laminate. The board is easy to mill and has very low formaldehyde emission. According to Perforator EN 120, formaldehyde emission is maximum 3 mg/100 g dry board. According to JIS A 1460, formaldehyde emission is between 0.3 and 0.5 mg formaldehyde/litre (according to JIS A 1901, equivalent between 0.005 and 0.02 mg/m²h). The board is free of isocyanates and phenol glues.
|
|
|
High-density chipboard with sanded, fine surface and particularly screwable core, MUF glued. The board undergoes minimal expansion and swelling under high humidity conditions and is suitable for load-bearing applications in humid conditions. Naturspan HS can be refined with paper, melamine, veneer or laminate. The board is easy to mill and has low formaldehyde emission. Natural wood has values of < 2 mg/100 g dry substance; Naturspan HS achieves the same low emission levels. The board is free of isocyanates and phenol glues. Naturspan HS was awarded the first prize by the VBO in the category "ECO product". Naturspan HS is the new name for Naturspan-0.
|
|
|
Highly fire retardant chipboard that complies with the most rigorous European standards. The board has a sanded, fine surface and a particularly screwable core. Suitable for industrial processing for interior decoration and furniture production, the board can be refined with, among others, paper, melamine, laminate or veneer. The board is heat- and fire-resistant and has low formaldehyde emission (E1 class). The board is used in particular in public buildings such as hospitals, airports, rest homes, theatres, hotels, etc. Antivlam® Class 0 withstands extreme heat and fire, does not contribute to flame spread and has a smoke development comparable to that of natural wood.
|
|
|
Chipboard with sanded, fine surface and particularly screwable core. Suitable for industrial processing for interior decoration and furniture production, it can be refined with paper, melamine, laminate or veneer. The board is heat- and fire-resistant and has low formaldehyde emission (E1 class). The board is used in particular in public buildings such as hospitals, airports, rest homes, theatres, hotels, etc. Antivlam® withstands extreme heat and fire, does not contribute to flame spread and has a smoke development comparable to that of natural wood.
|
|
|
High density chipboard finished with a shining flush UV lacquer which is especially designed for concrete formwork. The UV lacquer is composed of 3 layers (1 pore-filler layer and 2 finishing layers), is resistant to lye and is waterproof. The board has a particularly screwable core, is MUF glued and subject to minimal expansion and swelling in conditions of high humidity. The board is easy to saw and has low formaldehyde emission (E1 class).
|
|
|
High-density chipboard with sanded, fine surface and particularly screwable core, MUF glued. The board is subject to minimal expansion and swelling in conditions of high humidity. Suitable for load-bearing applications in humid conditions. Can be refined with paper, melamine, veneer or laminate. The board is easy to mill and has low formaldehyde emission. Natural wood has values of < 2 mg/100 g dry substance; Naturspan HS achieves the same low emission levels. The board is free of isocyanates and phenol glues. Naturspan HS was awarded the first prize by the VBO in the category "ECO product". Naturspan HS is the new name for Naturspan-0.
|
|
High-density chipboard with large chips, sanded surface and particularly screwable core glued with high quality MUF glue. Has high ridigity and bending strength.
The specific composition of coarse chips and the special MUF gluing provide SpanO-SB5® with a number of additional strengths:
- The board undergoes minimal expansion and swelling under high humidity conditions. The swelling percentage of SpanO-SB5® after immersion in water for 24 hours is considerably lower than for an OSB board. Therefore, SpanO-SB5® can, while it awaits further finishing, easily be stored unfinished in various weather conditions for a number of weeks.
- Good bending strength in both directions through the combined use of a layer of large area chips and a high quality UMF glue recipe.
- After production the surface of the board is sanded to a uniform thickness, allowing for a high-quality finish. The board is easy to saw and has low formaldehyde emission (E1 class).
|
|
High-density chipboard, MUF glued, with special oblique tongue profile, on two or four sides. The tongue profile ensures high stability and easy installation and allows blind nailing or screwing of the panels.
The Reno Floor Hydro has high rigidity and a hard, unsanded surface. This provides Reno Floor Hydro with great impact resistance. The hard, highly closed surface greatly facilitates cleaning of the floor.
The Reno Floor Hydro is produced with a melamine glue, allowing the board to retain its basic strength and minimise swelling and linear dimensional change, also in very humid conditions.
|
|
| ... products without information |
| |
|
Modular panel made of chipboard, composed of wood-core particles bound together by heat-hardener resins Thickness available 30 mm and 38 mm. This type of panel is suitable for working environments where a medium level physical-mechanical performance is required. It is recommended with HPL-laminate or resilient top finishes. It is not convenient for areas affected by humidity and it is therefore advisable to limit the use of water as much as possible even for its maintenance.
|
|
|
|