|
|
Rigidal B7 provides a neat and aesthetically pleasing appearance. Ideal for use as roofing and cladding material on industrial, commercial, agricultural and institutional buildings, B7 can be smooth curved to provide additional design flexibility particularly at the ridge ad eaves of the buildings.
Rigidal B7 has a cover width of 911mm and is available in the following standards gauges: 0.9, 1.2mm.when manufactured in aluminum; 0.5 and 0.7mm when manufactured in steel; and 0.75 when manufactured with the Versacor coating.
Metal Facings
- Rigidal B7 is available in aluminum with a plain mill or plain stucco embossed finish, or with a wide range of paint finishes, PVF2, ARS (Abrasion Resistant System) and polyester.
- Rigidal B7 is also available in galvanized steel with a Versacor, PVF2 or polyester paint system.
|
|
Mesh up to widths of 2000 mm
Long Way: up to 300 mm
Short Way: up to 100 mm
Strand Width: up to 35 mm
Materials:
Carbon steels; pre-lacquered; galvanized; Stainless steel; aluminium; copper; brass, titanium; plastics....
Finishes and coatings:
lacquering (RAL colours; textured; other special products...)
Anodized: metallic / organic
Hot and cold galvanising.
|
|
DESIGNER: Arch. Benedetto Camerana
PRODUCTS: 250 sqm of frames protected by COR-TEN steel blades, glazed floors and balustrade for steel suspended stairs.
|
|
Mesh up to widths of 2000 mm
Long Way: up to 300 mm
Short Way: up to 100 mm
Strand Width: up to 35 mm
Materials:
Carbon steels; pre-lacquered; galvanized; Stainless steel; aluminium; copper; brass, titanium; plastics....
Finishes and coatings:
lacquering (RAL colours; textured; other special products...)
Anodized: metallic / organic
Hot and cold galvanising.
|
|
Thickness:
up to 12 mm
Supplied:
We are able to manufacture perforated sheets and coils in any format.
Dimensions:
standard measurements (2000 x 1000 mm) and made-to-measure (up to widths of 1500 mm)
Discs, segments, margins and special shapes.
Materials:
Carbon steels; pre-lacquered; galvanized;
Stainless steel; aluminium; copper; brass, titanium; plastics...
Finishes and coatings:
lacquering (RAL colours; textured; any special products...)
Anodized: metallic / organic
Hot and cold galvanising.
|
|
Thickness:
up to 12 mm
Supplied:
We are able to manufacture perforated sheets and coils in any format.
Dimensions:
standard measurements (2000 x 1000 mm) and made-to-measure (up to widths of 1500 mm)
Discs, segments, margins and special shapes.
Materials:
Carbon steels; pre-lacquered; galvanized;
Stainless steel; aluminium; copper; brass, titanium; plastics...
Finishes and coatings:
lacquering (RAL colours; textured; any special products...)
Anodized: metallic / organic
Hot and cold galvanising.
|
|
Thickness:
up to 12 mm
Supplied:
We are able to manufacture perforated sheets and coils in any format.
Dimensions:
standard measurements (2000 x 1000 mm) and made-to-measure (up to widths of 1500 mm)
Discs, segments, margins and special shapes.
Materials:
Carbon steels; pre-lacquered; galvanized;
Stainless steel; aluminium; copper; brass, titanium; plastics...
Finishes and coatings:
lacquering (RAL colours; textured; any special products...)
Anodized: metallic / organic
Hot and cold galvanising.
|
|
Rigidal Systems offers a wide range of structural liner trays.
In wall applications, trays can be used horizontally, replacing traditional sheeting rails spanning the portal frames of the building.
The shallow profile of the tray pan creates a clean, uncluttered finish to the interior of the wall. Also, the edges of the trays serve to support the insulation material thus preventing insulation 'slump' and consequent cold spots.
|
|
| ... products without information |
| |
Facade Coatings for Metal, Composite and Plastic Panels
Metal facades that look like stone or mortar!
Use a metal facade that is extremly durable. With our coating you can have the look and feel of plastering and conventional stucco.
Surface Material:
The surface is a fine, grainy sand structure with one or more colours and with arbitrary structures. The surface is durable and the colours are stable over time.
Core Material:
The surface is coated onto conventional facade material: aluminium, zinc, steel, but also plastic, composites and ceramic / concrete are possible.
|
|
|
|
