|
|
|
|
|
|
The C5R - Cilindro Robota R portal is equivalent to the Standard version model C5-Cilindro Robota (except for the flush mount to the floor base and the available options).
The C5R - Cilindro Robota R is absolutely unique.
Developed in our R&D Laboratories, it is one of the most prestigious Alluser Portals.
Characteristics:
it offers the optimal solution for those who need a Secure Portal in very small places (i.e. the corridors).
by buying this model, you will have two of the most important elements: control of the access and the emergency exit.
the emergency exit incorporated in the structure of the Portal, represents an important innovation in this industry. The Portal contains an emergency no panic shackle door; however this door does not have the standard dimensions. In order to reach them, Alluser has devised a system based on the complete automatic opening of the doors of the portal (see the table) through the activation of the emergency no panic shackle door.
The structural characteristics of the C5 do not allow the installation of metal detector; whereas this Portal fits perfectly with the innovative and advanced biometric technologies.
|
|
|
|
|
|
Automated system A100 Compact for sliding doors (single leaf, two leaf with continuous service)
The compact dimensions enable the FAAC A100 COMPACT to adapt to any architectural ambient even when space is lacking.
For maximum use, the A100 Compact range adapts to single leaf sliding doors with max. weight of 110kg or double-leaf sliding doors with max. weight of 70 kg per leaf. If you install an A100 COMPACT automated system this means also you obtain a very generous energy saving in terms of climate control for the room accessed via the door, in addition to total elimination of architectural barriers.
Ever sliding reliability: in the event of a black-out, 100% operation is assured by buffer batteries (optional) with controller recharging.
Control is intelligent: a microprocessor verifies all the door’s functions in real time. You can choose the function logic from a function keyboard.
Absolute safety. In conformity with international safety standards, the A100 COMPACT range automatically programs opening and closing force and speed according to the door’s friction and weight. If the door meets an obstacle, it re-opens immediately and, when it closes the next time, it verifies the clearance of the obstacle at a lower speed.
|
|
Developed to widen the Alluser Portal range the HPJ 140 proposes
an intermediate model between the portal with traditional dimensions and the Maxi models.
Characteristics:
it respects the minimal measurements set by the European norm (the entrance in fact is 900 mm to allow a comfortable transit also to people with physical disabilities)
it is a "half portal", designed to be installed outside of already existing doors (whether they are traditional ones or sliding automatic doors).
it has optimal integrability with the biometric systems. The installation of metal detector device is not advisable.
|
|
The new full breakout automatic door has been developed to meet all market requirements in term of security in public resorts. It offers more flexibility and more comfort of use.
Its audacious conception allows to be installed with all operators types : Tina, Diva LC, Diva…
Optimal safe operation
New profile design
Comply with safety regulations (CO48)
In normal operation, the Full breakout door behaves like a traditional sliding automatic door. In breakout operation, sliding and semi-fixed leaves swing on the side and provide largest possible opening.
The full breakout door can also be used as emergency door but also to have a largest possible opening when bulky objects must be moved out (cars, furniture…).
|
|
Electro-Mechanical Operator for Swing doors
ISO OPERATOR
The ISO operator allows automation of any type of swing door, whether new or old.
Designed for intensive use, it is suitable for all places where large numbers of people are moving around: offices, hotels, restaurants…
It is also intended for areas where hygiene rules have to be observed and where it is not appropriate to touch door handles: hospitals, clinics, medical surgeries, laboratories…
Elegant and silent, the ISO operator simply turns any door into an automatic door.
ISO is a self-teaching electro-mechanical swing door operator. The door is opened by micro-controller. The door is closed by an electro-mechanical device.
Its box with rounded curves and all colours blends in with the top of the doors.
It is compact and offers no fewer high-performance functioning and safety characteristics, handling heavy doors up to 250 kg as a pushing operator.
|
|
Unmanned entrance with high degree of security. Trouble-free operation and simple mechanism makes this product suitable for many field of applications. The product range can be combined with keypads, code locks, card readers, biometrics devices or other access control devices.
Standard and optional features:
Design
Manual TurnStile with silent operation for internal installation
Casework in stainless steel with clear laminated glass panels and rotors in toughened frameless safety glass
Ø1500/1600 mm and unit height 2420 mm
Wide selection of materials and designs
Function
Normally Closed (N/C) or Normally Open (N/O)mode
Sensor in turnstile ceiling, preventing fraudulent use
Safety configurations for power failure or emergency situations
Cardreader, push button control integration
|
|
From the evolution of the E3-Maxi merged with the design of the Cylindrical Line, Alluser created C3-Cilindro Maxi. It is a model with the main characteristics of the E3 and, at the same time, those of a Cylindrical one.
C3-Cilindro Maxi:
is perfect if you are looking for a roomy, large Secure Portal
allows the transit to 4 or 5 people at the time or a wheelchair for people with disabilities.
is a refined and modern product which gives prestige to the entrance
Transparency of the structure, 80% of which it is constructed from glass, is amplified by the dimensions of the portal.
In the case of installation on an upper floor, the K version (C3K - Cilindro Maxi K) is suggested. If you want to know which options are available for the C3K-Cilindro Maxi K, please go to the end of this page.
In addition, this model is also available in the R Version (=Flush Mount to the floor Version) and KR Version (Kit+Flush Mount to the floor Version).
|
|
FPJ 140/1A
(Half portal + swing door)
The FPJ 140/1A is very similar to the HPJ 140, but it contains a manual door.
Characteristics:
- it respects the minimal measurements set by the European standard (the entrance is 900 mm to allow a comfortable transit also to people with physical disabilities)
- it has a very good integrability with the biometric systems; the installation of the metal detector device is not advisable.
|
|
Like the model HPJ 140, the FPJ 140/2S is a "half portal", but this model contains 2 automatic sliding doors (referenced by the 2S, at the end of the name).
Characteristics:
it respects the minimal measurements set by the European standard (the entrance in fact is 900 mm to allow a comfortable transit also to people with physical disabilities)
It has a very good integrability with the biometric systems.
NEW*! Now avaialble with the Metal Detector!
|
|
C4-Cilindro Bibussola has the main characteristics of the E4-Bibussola and, at the same time, those typical of the Cylindrical portals.
C4-Cilindro Bibussola in fact:
is equivalent to the E4 in Cylindrical style
represents a product able to satisfy the aesthetic requirements
allows the transit of an elevated flow of people
we suggest such a model if you wish to install 2 Secure Portals, but you do not have enough space: such a model allows the installation of 2 Secure Portals by saving at least 240 mm room.
|
|
|
|
|
|
DITEC automatic doors
A sign of distinction
Comfort, safety, prestige, hygiene, appeal, access control and, in the case of air-conditioned areas, optimised energy consumption: these are just some of the advantages that you can have from an automatic door.
DITEC is a leading manufacturer of these functional and useful automations.
Today's life has made it more and more frequent and common to find doors that open when we get near them. Thanks to cutting-edge technology, superior quality of processes and materials, our automatic sliding doors, opening and closing smoothly and trouble-free, not only give the building something more in terms of look, novelty and appeal but they also make the life of the people using them more and more comfortable.
This is why having an automatic door is not only a question of image and adaptation to advanced technical solutions, it is also a sign of care for the people that come and go, in that it makes their life easier.
Automatic doors also provide an useful means to solve problems arising from architectural barriers.
DITEC constant commitment to study new solutions and offer the widest range of products to meet any customer requirement are a tangible reality.
|
|
Sliding Door with Controlled Leakage Flow
DIVA LC Clean range
The DIVA LC Clean sliding door is designed to respond to the requirements of the most advanced technological sectors for which a controlled atmospheric environment is
necessary. This door range is dedicated to sites where air permeability must be controlled: hospitals, clean rooms, laboratories, etc.
DIVA LC Clean offers specific technical solutions, while
providing an enormous usage comfort:
• People transporting sensitive materials or pushing a
carriage appreciate a wide automatic opening.
• Doors opening without contact or handle manipulations
allow respecting stringent hygienic rules.
• Adjusting leaves opening and closing speeds limits
contamination exchanges between two areas.
- Leakage flow controlled with air pressure
- Ergonomy linked to cleaning and decontamination requirements.
- Sound attenuation and isolation down to 30 dB*
|
|
|
|
|
|
Sliding Automatic Door
TINA Range
Compact drive unit (10 cm)
New design
Easy installation
TINA is a versatile and effective solution for all intensive, semi-intensive and private uses. Its elegant design and its low frame height means it can be harmoniously included on any type of premises.
The doors in this new range are easy to use, designed for quick installation, and are the perfect solution for those who want to enjoy the comfort of an automatic door without complexity...
TINA is redefining the standards for high-performance
automatic doors that are practical and easy to install.
TINA is available as single or double sliding versions, with or without fixed leaves.
Its flexibility means it can manage leaves in Securit glass and 25 mm, 38 mm, up to 50 mm profiles. Its performances make it a reference in its class: its compact 10 cm drive unit moves heavy leaves of up to 2x120 kg.
The removable covers on both sides of the detector cover provide easy access to the drive unit without interrupting the door's operation or the detection system.
All standard functions are available and can be programmed. Users can select a multi-function or a simple control system depending on their needs.
|
|
Sliding and Telescopic Automatic Doors
DIVA LC range
Combining performance and reliability, the DIVA LC range is designed for heavy traffic and intensive use.
The range is made of two models :
• Sliding doors,
• Telescopic doors.
DIVA LC doors offer a wide choice of independent modules to let increase
the door functions when needed.
DIVA LC doors are upgradable doors which can meet all your requests when needed :
• An operator designed for high traffic situations
• Upgradable functions
• Slim and rounded casing
• Wide choice of finishes
|
|
DIVA Range
Round and Curved Automatic Doors
Performance and elegance
Elegant and functional, these doors let have a wide
radius of curvature for wide but also deep entrances:
the round and curved doors turn an entrance into
a spacious and comfortable reception.
Their high architectural quality and their performance
make them exceptional doors:
• Customised dimensions
• Wide choice of finishes
• Comfort and easy use
• Heat insulation by airlock management
• Offset digital control panel
• Incorporated traffic analyser
• Infrared remote control
• Self-controlled infrared barrier
• Locking device through infrared key
|
|
|
|
|
|
DITEC automatic doors
A sign of distinction
Comfort, safety, prestige, hygiene, appeal, access control and, in the case of air-conditioned areas, optimised energy consumption: these are just some of the advantages that you can have from an automatic door.
DITEC is a leading manufacturer of these functional and useful automations.
Today's life has made it more and more frequent and common to find doors that open when we get near them. Thanks to cutting-edge technology, superior quality of processes and materials, our automatic sliding doors, opening and closing smoothly and trouble-free, not only give the building something more in terms of look, novelty and appeal but they also make the life of the people using them more and more comfortable.
This is why having an automatic door is not only a question of image and adaptation to advanced technical solutions, it is also a sign of care for the people that come and go, in that it makes their life easier.
Automatic doors also provide an useful means to solve problems arising from architectural barriers.
DITEC constant commitment to study new solutions and offer the widest range of products to meet any customer requirement are a tangible reality.
Automatic pedestrian doors - TEN
Automatic architecture.
It is becoming increasingly common today to design buildings with technological facades.
The automatic facades that closely monitor entrances and control the effect of the outdoor climate obviously have
to blend in with the technological structures and be of appropriate quality.
Ten is the new DITEC automatic system that has been designed to meet these new architectural and applicational needs.
|
|
|
|
|
|
FPJ 140/2HP
With its innovative and winning aesthetic design, the FPJ 140/2HP is very different from the other portals because of its elliptic shape, far from the classic square ones or the soft cylindrical structure of the tube style line.
Characteristics:
- It is made up of 2 HPJ 140 units, connected by a central element with variable dimensions.
- It allows a high throughput, thanks to its dimensions [1220 x 1750 (variable) x (h) 2060 mm].
- Very good the integration with the A.P.D. System
- It respects the minimal measure previewed from the European Standard (the entrance in fact is 900 mm to allow a comfortable transit to people with physical disabilities).
- High flexibility: FPJ/140 2HP is in fact the first one of a new generation of Secure Portals, where the Customization is very important. In fact a central modular element (see the golden part in the picture) makes the length of the door variable, to satisfy your needs.
In case of important dimensions, such variable infill can be made of glass.
|
|
The C1-Cilindro Standard has all the characteristics and the advantages of the Cylindrical Series: aesthetic design, elegance and transparency. These are the elements that have made it a very successful product.
Here are the characteristics of C1-Cilindro:
the transparency reduces the feeling of claustrofobia
it is an elegant, modern and refined product which gives prestige to the surrounding environment.
easy installation.
the space occupied by this cabin (as in general the Cylindrical Series) is shared between the external and the internal wall at 50 %.
|
|
Available in our widest range of configurations, the Series 4000 operator is easily adapted in the field for a wide range of commercial uses.
- Choice of header models for surface applied or overhead concealed installations
- Preset for left or right hand operation as ordered, easily modified if desired
- Simple adjustments for full energy (automatic) or low energy (handicap)
- Single acting spring always returns door to closed position, with adjustable speed and force.
|
|
Automatic swing doors are available in two varieties - fully automated or low energy. The fully automated is a powerful, automatic swing door operator that is suitable for standard as well as larger and heavier doors.
The KONE swing door operator is flexible and can be adjusted to accommodate the demands of many different environments as a low energy solution. The automatic swing door operation can easily be controlled and modified via a user-friendly interface.
KONE automatic swing door has been installed in a variety of environments including schools, offices and retail outlets enabling effective People Flow.
|
|
Remote access door with electric strike
The aluminium remote access door is designed for installation where controlled access is necessary, but egress can be allowed with a lever handle. Typical situations include restricted entrances to commercial or residential buildings.
|
|
Ideal for small vestibules and hospital corridors that require wide openings in a narrow corridor. Each Folding Access® door package includes Vista® sensing technology for full automatic operation. The system may also be specified for manual operation. The folding design incorporates the built-in safety of emergency breakout and a low closing force of less than 15 lbs. Available with magnetic lock and panic hardware.
Standard Features
- Emergency breakout
- Finger guard at all hinge points
- Accommodates 1-way or 2-way traffic
- Also available in manual opening styles for ICU applications
|
|
Spacious compartments provide an elegant, energy efficient entrance up to 16 ft. in diameter to manage high volume traffic needs including shopping carts, bicycles, wheel chairs, walkers and even hospital stretchers.
Standard Features
- Segmented® or round drum design
- Panels fold against the core for emergency egress
- Smooth, continuous rotation
- VistaScan™ electronic sensing system slows or stops the door when objects are within 8" to 12" of the wings
- Customizable voice enunciator
- StormLock™ feature for high wind conditions
|
|
Available in a choice of 1-Way, 1-Way Airport and 2-Way Card Access security packages, this system has selectable security levels. Add optional Level III bullet resistant glazing and Visdom HS® advanced 3D antipiggybacking/ anti-tailgating prevention sensors for ultimate protection in banks/financial, government and other high security installations.
Standard Features
- Segmented® or round drum design
- Wireless remote setup with 16 modes of operation and other programming options
- Field programmable voice messages
- Magnetic breakaway for emergency egress
- Choice of anodized aluminum, paint or metal clad finishes
- Special sizes, extended canopy and other options available
|
|
|
Since the early ‘70s, Horton Automatics has been providing automatic door equipment for the transit industry worldwide and is currently the only U.S. manufacturer of such equipment. This equipment can be classified as two different products: Station Platform Doors and Vehicle Door Operators. In general, this equipment has been furnished and installed as an integral part of Automated People Mover (APM) systems, although we have furnished doors for some inclined lifts as well. APMs are train systems designed for light to medium duty traffic, primarily in airports, urban business districts, or industrial complexes.
|
|
For High Traffic Commercial Entrance Applications
This heavy duty belt drive door system is engineered to provide long life and quiet operation in a high traffic environment.
Exclusive standard system features:
- Heavy duty drive-train with 1/8 HP motor and 3/4" steel reinforced belt drive system
- Durable 6" X 6" header
- High quality steel carriage wheels with ball bearing design
- Fully replaceable nylon covered aluminum carriage track
- Patented panic breakout system featuring a solid bar wheel carriage with continuous interlocking. This ensures dependable emergency breakout without sagging, along with effortless resetting.
- Adjustable astragal with double weatherseal captured in door panel extrusion. This ensures lasting and superior weatherseal.
- Superior high-strength corner block construction for all door panels for years of dependable service
|
|
The Horton-exclusive drive systems feature a slim 4" x 6" header that allows for a flush installation to 4" jambs and quick header-to-jamb fastening with no header end caps required. This results in attractive sight-lines with hair-line joints.
Exclusive standard system features:
- Heavy duty drive-train with 1/8 HP motor and choice of gearless linear drive system or belt drive system
- High quality steel carriage wheels with ball bearing design
- Fully replaceable nylon covered aluminum carriage track
- Patented panic breakout system featuring a solid bar wheel carriage with continuous interlocking. This ensures dependable emergency breakout without sagging, along with effortless resetting.
- Adjustable astragal with double weatherseal captured in door panel extrusion. This ensures lasting and superior weatherseal.
- Superior high-strength corner block construction for all door panels for years of dependable service
|
|
A powerful, fully automatic sliding door solution, suitable for single, double, telescopic and curved sliding doors. The automatic door operation can be controlled and modified via a user-friendly interface.
KONE automatic sliding doors are suitable for all commercial envronments facilitiating efficient and safe people flow. KONE automatic doors are attractive and durable. Contact us to find out more or to receive a quote.
|
|
Sunglass is specialised in the production of curved glass for the sector of building and architecture, industry and decoration
Research, experimentation and high level technologies have enabled the company to achieve ambitious goals that demonstrate and highlight its great technical and productive capacity as well as the high quality and reliability of its products.
|
|
| ... products without information |
| |
|
|
