|
|
|
|
|
|
Coplanar fixed and opening frames for glazing up to 33 mm.
Simple action
Traditional or thermal break versions with the same sightlines.
1 & 2 leaf inward / outward opening.
Hinges in rabbet up to 100 kg or 120 kg with face-fixed pin hinges.
Range of thresholds according to the destination of the building: for exposed areas, wheelchair access…
Wide choice of ergonomic locks and handles: lever handles, push or pull bar, pad handle...
Specific devices to reinforce the security and numerous options: electric strike plate, fire-door espagnolette, emergency exit push bar…
Double-action
1 & 2 leaf in standard version without thermal break
Adjustable floor spring set into the floor.
Finger protection gasket.
Same locks and handles as conventional simple action doors.
Construction:
Peripheral opening frame or baseboard and double weather seal.
Specific water tightness devices according to each threshold choice for a better performance.
Economical solution, easy and qualitative fabrication: no machining for hinges, punching tool for drainages.
|
|
Overview
-The Marvin Commercial Door combines warm wood interiors, exceptional
performance and heavy duty proportions.
-It's available as a wood or clad-wood door, featuring extruded aluminum
cladding and a finish that exceeds AAMA 205-02 requirements.
-Commercial Door options include a closer, several locking system options,
Von Duprin Panic Rim (crash bar), kick plate, raised and flat panel options
and several sill options.
-A steel frame with a removable mullion is also available for the
Commercial Door. The frame comes primed and not painted.
Standard Features
-4 ½" x 4 ½" (114mm x 114mm) square corner ball bearing hinges
-No lock / no bore
-Factory-applied low-profile sill and panel sweep
-Insulating glass
-Beveled meeting stiles
-Wood or clad/wood panel and frame
-6" (152mm) wood stiles and top rail
-11 3/8" (289mm) bottom rail
-1 3/4" or 2 1/4" (44mm or 57mm) thick panel
|
|
Theatre is a new, original system of doors. In Theatre, the structure of the door, crafted thanks to Lualdi's sophisticated ability in the use of wood, is entirely covered in leather. The final result is a warm and refined elegance, highlighted by smooth lines.
|
|
|
EFCO's standard entrances are designed for educational facilities, shopping centers, offices and other facilities requiring security and egress capabilities. EFCO standard entrances are joint plug welded at every corner to provide superior strength in all applications. Offered in narrow, medium and wide stiles, EFCO standard entrances can accommodate a wide range of applications. Multiple glazing options provide flexibility to meet specific design requirements, and the product's ability to accommodate most hardware applications increases its versatility. EFCO's standard entrances provide the complete solution for your fenestration needs.
|
|
- A universal frame sleeping for an implementation by welding,
sealing or screwing.
- Casements full with 58 mm d%u2019epaissor for an increased impact resistance.
- Two anti-dégondage pawns per casement for an effective complement
against l%u2019arrachement of the casement.
- A broad range d%u2019équipements allowing the basic doors d%u2019être DAS emergency exit according to the standard NFS 61.937 or doors of reserve
reinforced against l%u2019intrusion.w
|
|
When aesthetic considerations are as important as ease of maintenance and long life, Special-Lite® SL-16 Aluminum Flush Doors are the perfect answer. They provide an attractive, easy-care option for applications where reduced glass area is desired, but only moderate abuse tolerance is required. They offer excellent design flexibility and feature an elegant, contemporary look that's particularly well suited for commercial and educational facility applications subjected to moderate to heavy traffic.
Challenging environmental conditions such as high humidity or corrosive chemicals that quickly destroy hollow metal doors are not a problem for our SL-16. This makes it the ideal choice for water and wastewater treatment plants and industrial facilities. It is also available with stainless steel face sheets (SL-16SS) for sanitary environments such as hospitals, laboratories, and kitchens, and in smaller sizes with closed top and bottom rails (SL-165) for bathroom and shower stall doors.
|
|
Special-Lite® SL-18 Colonial and SL-19 Wood Grain AMP Flush Doors combine traditional styling with the advantages of modern engineering and materials to deliver high performance and long life. They're durable enough for even high traffic entrances in educational, religious, restaurant, retail and municipal facilities that call for the classic appearance of a wood door.
The SL-18 AMP Colonial Door is a classic 6-panel style door with the appearance of a traditional colonial style wood door, right down to the realistic oak grain detail. The SL-19 AMP Wood Grain Door also has a wood grain texture, and projects the rich, warm appearance of a traditional flush wood door.
|
|
The super-tough SL-17 and SL-175 Pebblegrain FRP Flush Doors are the informed choice for challenging environments such as schools, public buildings, water and wastewater treatment facilities, service entrances, and other applications that quickly damage or even destroy lesser doors. In fact these doors are so tough, the SL-17 is hurricane-rated and Florida approved for use in coastal regions.
Our pebblegrain FRP doors feature Special-Lite's exclusive SpecLite3® FRP, which is measurably better than any other FRP available on any other doors. It's incredibly scratch resistant, graffiti wipes right off with standard graffiti cleaners, and it will never need painting. We also offer other FRP face sheets that can be painted.
|
|
|
Extruded aluminum doors and frames are similar in structural appearance to formed stainless steel or bronze doors. Aluminum extrusions are used in place of formed metal, and stiles are internally fastened to the top and bottom rails during fabrication. Stile widths are available in 2-1/2". 3-1/2". and 4-1/2". Top rails are 2-1/2". 3-1/2" and 5". Bottom rails are 6". 7-1/2". and 10" or greater with dress plates. Frames are 3"x5" or 3"x6'. Glass thickness may vary. These doors may be customized. Offset aluminum frames, which present a dramatic sightline. are available.
|
|
|
Tempered glass doors are "all glass" doors which feature a top and bottom rail which secure the glass to the operating mechanism. Rails can be made of stainless steel, bronze or aluminum. Bronze and stainless steel rails are a minimum of 4-3/4" height and standard aluminum are 4-3/4" and 10" in height.. 1/2" tempered glass is used for doors up to 8'-0". 3/4" tempered glass is used for doors from 8"-0" to 10-0". Narrow stile doors are essentially the same as tempered glass doors but feature thin, decorative stile edges. The stiles can be made from clad bronze, stainless steel, or extruded aluminum.
|
|
|
Ellison Balanced Wood Doors are distinctly different from conventional doors. When an Ellison Balanced Door opens. 2/3 of the door swings outward while 1/3 swings inward, thus traveling on an elliptical arc rather than the circular path required by hinged doors. This unique opening motion allows external wind loads to help, rather than hinder, the user. The Ellison Door actually pivots on two arms- located at the top and bottom of the door - which are welded to a pivoting shaft adajacent to the door. The shaft is connected in the frame header to a concealed hydraulic checking device, and is connected at the base to a geared floor box adjacent to the threshold. The shaft contains a torsion bar spring which provides the closing force for the door. The overhead hydraulic check and guide assembly guides the door as it opens and provides adjustable timed closing speeds.
|
|
|
Formed stainless steel or bronze doors are constructed with a minimum stile width of 2-3/4'' (3-1/2' preferred), a minimum top rail height of 2-3/4" (3-1/2* preferred), and a minimum bottom rail height of 6". Minimum face width of frame material is 3" in most cases, and frame depth is a minimum of 5". Glass and glass thickness may vary. Doors can be cuslomized to suit architect's concept.
|
|
|
Ellison Balanced Wood Doors are distinctly different from conventional doors. When an Ellison Balanced Door opens. 2/3 of the door swings outward while 1/3 swings inward, thus traveling on an elliptical arc rather than the circular path required by hinged doors. This unique opening motion allows external wind loads to help, rather than hinder, the user. The Ellison Door actually pivots on two arms- located at the top and bottom of the door - which are welded to a pivoting shaft adajacent to the door. The shaft is connected in the frame header to a concealed hydraulic checking device, and is connected at the base to a geared floor box adjacent to the threshold. The shaft contains a torsion bar spring which provides the closing force for the door. The overhead hydraulic check and guide assembly guides the door as it opens and provides adjustable timed closing speeds.
|
|
| ... products without information |
| |
|
|
see the results for the following category : 
