|
|
One of a pair of external escape stairs, 10m high, factory primed with site applied paint finish.
Stair supported on four circular hollow section columns with lateral ties to the building. Semi-circular intermediate landings, tubular handrails and balustrades and curved, profiled sheet steel canopy.
|
|
ALUMINIUM STAIRCASE CONSTRUCTION ELEMENTS TECHNICAL CHART EXTRUDED
AND ROLLED ALUMINIUM
1.0 DESCRIPTION AND SIZE OF WALKING STRUCTURES
1.1 SIZES step element (Aluscalae code G30050) width 300 mm., height 50 mm., no. 2 tubular
stiffening hollows no. 3 through holes 10 mm diameter for fastening. Step edge profile with 45°
angle. Average thickness of the extrusion: 3 mm.
1.2 SIZES modular platform element width 400 mm. height 40 mm, with no. 5 stiffening ribs
comprising no. 3 hollows for fastening to the thigh armour (see 3.1) Predisposition for fixing
extruded terminal with 45° angle.
|
|
ALUMINIUM STAIRCASE CONSTRUCTION ELEMENTS TECHNICAL CHART EXTRUDED
AND ROLLED ALUMINIUM
1.0 DESCRIPTION AND SIZE OF WALKING STRUCTURES
1.1 SIZES step element (Aluscalae code G30050) width 300 mm., height 50 mm., no. 2 tubular
stiffening hollows no. 3 through holes 10 mm diameter for fastening. Step edge profile with 45°
angle. Average thickness of the extrusion: 3 mm.
1.2 SIZES modular platform element width 400 mm. height 40 mm, with no. 5 stiffening ribs
comprising no. 3 hollows for fastening to the thigh armour (see 3.1) Predisposition for fixing
extruded terminal with 45° angle.
|
|
Our production method allows the Client to employ a fast and efficient installation service.
Finish suitable for direct decoration.
Supplied with cast-in lifting points.
Units cast from quality timber moulds or from fully adjustable steel moulds.
Barcon Precast is able to provide any configuration of precast stair to suit Client requirements.
Barcon Precast design facility can work with you to achieve the best result.
Flights can be cast with either cast-on landings or separate half/floor level landings.
Barcon Precast has the facility to produce winder or curved stairs.
|
|
|
The precast concrete stair & landing manufacturing facility at Harrington Concrete allows flexibility, as each individual precast unit can be manufactured to any width, rise & going in accordance with the Technical Building Regulations, using our fully adjustable moulds. Each unit can have the landings attached or left separate, as required.
|
|
|
Experience in off site fabrication acquired over years of consolidated activity has allowed STERCHELE SpA to offer innovative, highly technical finished products which has set it at the top of a market experiencing continuous development and allowed it to provide clients with solutions which are always avant-garde.
|
|
Precast concrete staircases are very interesting products for domestic and other buildings, because of the quality of finishing and the cost efficiency. Various types of precast stairs are available at Consolis, going from individual steps to straight or helicoidal monobloc units.
The first category comprises straight stair units. They are made of both individual precast flights and landings or combined flight and landings. In the latter solution there may be differential levels at floors and half-landings, necessitating a finishing screed or other solution.
The second category comprises monobloc staircases. They can be used either in the stairwells or individually between the different storeys.
|
|
Nearly all construction problems in building and industrial construction can be surmounted extremely well using prefabricated individual elements and segments. The systems have been technically perfected and are particularly attractive in terms of price and performance - your construction budget will be noticeably relieved.
Heberger pre-engineered construction services can point to a number of reference construction projects underlining a further aspect: reinforced and prestressed, precast concrete component construction is quite comparable to "classically" constructed buildings and offers the same variety of forms and architectural aesthetics. We produce nearly every kind of construction element for building construction, civil engineering and industrial facility construction. With such a broad spectrum of services together with our strong reputation in this sector, we are able to offer tailor-made solutions for every application.
|
|
JUMA Beton is the specialist in the manufacture of WORK OF PRECISION out of precasted concrete.
JUMA Beton produces all kinds of work of precision out of concrete smoothes, gray and this as well for the industrial premises, nonresidential construction, residential construction like for the construction of roads.
For the prefabricated staircases, we can possibly conceive only the whole of the project (formwork AND braces).
|
|
The Spürgin prefabricated stairs is covered flexibly applicable, individual Treppen.Das versatile stair system both the variable, geradläufigen staircases, (when desired with on-formed landings) and ½ - and 2x ¼ - coiled system flights of stairs with given, and variable run appearance spread and Steigungshöhen.
They insert your staircase fixed and finished into your carcass. The staircase is fully loadable after the assembly. The system stairs can be used as building stairs. The under-faces of the staircases are formwork smooth.
|
|
| ... products without information |
| |
The Jet Set filtering stairs
This stair unit is inserted between two structure panels during assembly. Filtration, stairs, spotlight%u2026 the unit features a blower, counter-current swimming unit, and spa-style hydrotherapy jets... Chose your own level of comfort
|
|
|
|
|
|
Our products are applied only in the professional sector: industrial buildings, offices, governmental buildings etc.
Aluminium Roof Access Hatch 1400 x 700 mm with Scissor Stairs Type Large
Type: RH Type Large, Gorter® - completely assembled
Safety Approval Report (EN-ISO 14122-3) available.
Standard opening in mm:
1400 x 700, longest side is hinge side
With FixGrip on cover to safely enter and leave roof hatch
Standard Powdercoating:
RAL 7047 (outside) and RAL 9010 (inside).
Hardware:
- Counterbalancing system for assited opening and controlled closing
- Weathertight gasket
- Hold-open arm that engages automatically, one hand release
- Cylinder lock
Installation:
With screws or bolts (by others)
SCISSOR STAIRS in casing with cover
Type: Type Large, Gorter®, completely assembled
Room height: --------------mm (max. 3000 mm)
to be specified from top of floor to bottom of cover.
Casing:
For structural opening size 1200 x 700 mm
Height: 250 mm
Stairs:
Material: aluminium
Size steps: 360 x 140 x 26 mm, anti-skid
Handrail prepared for padlock to secure retracted stairs
Width: 450 mm
Projection while opening: 600 mm
Hardware:
Hook and eye
Stair guide control system
Installation:
With screws or bolts (by others)
|
|
|
|
|
|
Our products are applied only in the professional sector: industrial buildings, offices, governmental buildings etc.
Aluminium Roof Access Hatch 1400 x 700 mm with Scissor Stairs Type Large
Type: RH Type Large, Gorter® - completely assembled
Safety Approval Report (EN-ISO 14122-3) available.
Standard opening in mm:
1400 x 700, longest side is hinge side
With FixGrip on cover to safely enter and leave roof hatch
Standard Powdercoating:
RAL 7047 (outside) and RAL 9010 (inside).
Hardware:
- Counterbalancing system for assited opening and controlled closing
- Weathertight gasket
- Hold-open arm that engages automatically, one hand release
- Cylinder lock
Installation:
With screws or bolts (by others)
SCISSOR STAIRS in casing with cover
Type: Type Large, Gorter®, completely assembled
Room height: --------------mm (max. 3000 mm)
to be specified from top of floor to bottom of cover.
Casing:
For structural opening size 1200 x 700 mm
Height: 250 mm
Stairs:
Material: aluminium
Size steps: 360 x 140 x 26 mm, anti-skid
Handrail prepared for padlock to secure retracted stairs
Width: 450 mm
Projection while opening: 600 mm
Hardware:
Hook and eye
Stair guide control system
Installation:
With screws or bolts (by others)
|
|
|
|
|
|
1/4" RAMP ARMOR®/SKATELITE PRO%u2122
This paper-based material is used as the final riding surface and every piece is cut on our C.N.C. router to ensure quality and accuracy.
1/2" POLYETHYLENE / 3/4" VARIOLINE TMR
We offer a couple different corrosion proof options when it comes to the substrate, and like Skatelite Pro%u2122, every piece is pre-engineered and cut on a C.N.C. router to meet our rigorous standards.
STAINLESS STEEL FASTENERS
Our fasteners offer the best strength and corrosion protection available to make certain your ramps can withstand the elements.
2" x 6" LUMBER FRAMEWORK
We use a minimum ACQ treated 2" x 6" framework on 8" centers.
CHOICE OF COLOR
Ramp Armor® and Skatelite Pro%u2122 are available in your choice or either tan or black.
HOT-DIP GALVANIZED GRINDRAILS
The galvanized coating ensures that even after years of grinding, these areas will still look great and be free of rust.
3/4%u201C HD POLYETHYLENE SIDES AND ENCLOSURES
This incredibly strong material is inherently corrosion resistant and also encloses the equipment, leaving no exposed lumber.
HOT-DIP GALVANIZED STEEL
All the steel on this ramp, from platform guards to the toe plate is galvanized after fabrication to ensure maximum corrosion protection.
GALVANIZED VERTICAL BALUSTER GUARDRAILS
Hot-dip galvanized steel guardrails are not only tough and corrosion resistant, but the vertical design will increase visibility, allow airflow, and minimize the likelihood of climbing.
|
|
|
|
|
|
THICK 3/16'' LASER CUT FRAMEWORK
By using technology like a laser table to cut our thick framework we are able to hold incredibly tight tolerances. This ensures that each ramp section fits together perfectly for a seamless feel and appearance.
TAMPER-RESISTANT STAINLESS STEEL HARDWARE
All the hardware that is used is stainless steel and the pinned-hex head bolts ensure that they are only removed when you decide
HOT-DIP GALVANIZED COPING/GRINDRAILS
The galvanized coating ensures that even after years of grinding these areas will still look great and be free of rust.
THICK 3/16'' STEEL RIDING SURFACE
This surface is guaranteed not to crack, dent, chip, warp, or ever need replacing. Combine this with the corrosion protection of galvanizing and the perfect traction of the MaxGrip'' paint and it is easy to see why this surface is the maintenance departments dream come true.
13-GAUGE GALVANIZED SOLID STEEL ENCLOSURES
Our thick steel enclosures are galvanized before they are powder coated to ensure maximum corrosion protection. What more can be said...we build a tank!
BEVELED LEADING EDGE
We take an extra step and bevel down the leading edge to make the transition so smooth the rider glides on and off the ramps.
NO APPROACH PLATE SEAM
Because the riding surface itself serves as the transition from the ramp to the concrete, there is no need for a separate approach plate. When an approach plate has to be used, it creates a seam that runs perpendicular to flow of traffic, which can be bothersome and even unsafe if the materials shift over time.
|
|
|
|
|
|
TRIPLE LAYER SURFACING SYSTEM
1st layer - 13-gauge galvanized steel provides outstanding support and is key in our advanced bolt-through design.
2nd layer - ½'' HD Polyethylene is corrosion resistant and serves as a buffer between the finish layer and the steel substrate.
3rd interchangeable layer
- Phenolics (Ramp Armor, Skatelite Pro, Ramp X,) Paper based phenolic resin surfaces that are available in a choice of colors.
- MaxGrip%u2122 - 12-gauge steel layer coated with our exclusive MaxGrip%u2122 finish.
- Veiled Vinylester (SkateShield) - Synthetic surfacing with ultraviolet inhibitors, minimal water absorption, and negligible thermal expansion.
- Stainless Steel - enough said.
TAMPER-RESISTANT STAINLESS STEEL HARDWARE
All the hardware that is used is stainless steel and the pinned-hex head bolts ensure that they are only removed when you decide
THICK 3/16'' LASER CUT FRAMEWORK
By using technology like a laser table to cut our thick framework we are able to hold incredibly tight tolerances. This ensures that each ramp section fits together perfectly for a seamless feel and appearance.
CHOICE OF COLOR
Ramp Armor® and Skatelite Pro%u2122 are available in your choice of either tan or black.
HOT-DIP GALVANIZED GRINDRAILS
The galvanized coating ensures that even after years of grinding, these areas will still look great and be free of rust.
13-GAUGE GALVANIZED SOLID STEEL ENCLOSURES
Our thick steel enclosures are galvanized before they are powder coated to ensure maximum corrosion protection. What more can be said...we build a tank!
|
|
|
|
