|
|
|
Electrolux cold rooms are available in a vast range of different sizes and functionalities. They are designed to work in tropical temperatures (+43ºC). The range consists of coolers (-2/+8°C) with panels 60 mm in thickness, freezer cold rooms (-10/-21ºC) with panels 100 mm in thickness and with built-in or remote refrigerating unit. The three models detailed on this sheet are freezers cold rooms with usable volume of 12 to 14 cubic meters. Models come with panels and gas pre-charged cooling unit.
|
|
BUILT-IN CELLS
The wide range of DSL refrigerated cells is available in 4 different heights, 3 depths and 9 widths, with 3 different types of refrigeration. Enbloc structures insulated with high-density polyurethane (40 kg per m3). AISI 304 18/10 stainless steel, Scotchbrite and polished BA finishes - De Luxe Range. SCOTCHBRITE
More Photos
The cells can be fitted with doors, drawers, intermediate or bottom wire shelves, internal lighting and fitted or external motor. Different types of stainless steel tops can be placed on the upper part of the cell, which has polyurethane insulation.
|
|
Walk-in cooler 283X243 -10-21ºC GR. PREM
Code: 102313
Model: MF14024CL
Length (mm): 3030
Depth (mm): 2630
Height (mm): 2230
Weight net (kg): 638
Gross weight (kg): 595
Rough volume (m ³): 8.05
Electric output (kw): 1.6
Tension: 380/400 V
Phases: 3N
Frequency (Hz): 50
|
|
| ... products without information |
| |
| ... products without information |
| |
Coolers conceived to cool and ventilate small and medium-sized premises where it is necessary to have mobile equipment to cool concrete working or machinery areas.
It can also be used for conditioning farms and greenhouses. It can be installed in the interior of the premises or on the wall with its base shelf (it can be used with opened doors and opened windows.)
|
|
Water chiller
Water cooled
Indoor/outdoor installation
Capacity from 197 to 511 kW
The WSH-SC units belong to the SPINchiller family and therefore feature high energy efficiency, self-adaptation and reliability.
-Compactness: when designing the unit special attention was paid to reducing the dimensions of the front as much as possible. The width in the units up to 500 kW capacity has been reduced to just 85 cm so that they can pass through normal doorways.
-Special attention has been paid to making connection to the service system easy so that work requiring specialised personnel is drastically reduced thereby allowing installation costs to be cut considerably. This same policy ensured that attention was paid to easiness of controls and maintenance on all the most sensitive parts.
-EFFICIENCY that increases as the heating load decreases, while guaranteeing maximum requested load when necessary. SPINchiller always ensures maximum comfort with very high efficiency and consequently considerable energy savings;
-The particular abundance of optional accessories allows customisation of the unit, also for special requirements both in the civil and technological air-conditioning sphere. In particular the optional for the HydroPack water circulating unit, consistent with the concept of modularity, has several pumps in parallel (up to 3), to monitor the system load variations better and to regulate the water flow in the critical system starting (or restarting) stages so that outside servicing is avoided.
|
|
... see all the products in the category
Heat pumps
|
|
|