- Heating, Air Conditioning, Electricity >
- Heat pump, Ventilation, Air conditioner >
- Commercial ventilation grill
Commercial ventilation grills
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
• Made from aluminium sections: AlMgSi 0.5 (according to EN 12020-2) • Finishing: anodised in satin/bronze colour (20 microns) or powder-coated in any R AL or Syntha Pulvin® colour (60-80 microns) (for UK min 40 microns) • Stainless steel ...
RENSON
Made from aluminium sections: AlMgSi 0.5 (according to EN 12020-2) Finishing: anodised in satin/bronze colour (20 microns) or powder-coated in any R AL or Syntha Pulvin® colour (60-80 microns) (for UK min 40 microns) Stainless steel ...
RENSON
Made from aluminium sections: AlMgSi 0.5 (according to EN 12020-2) Finishing: anodised in satin colour (20 microns) or powder-coated in any RAL or Syntha PulvinR colour (60-80 microns) (for UK min 40 microns) Stainless steel 304 insect ...
RENSON
Width: 20, 15 cm
Length: 20, 15 cm
Thickness: 3 cm
Decorative ventilation solution for enclosures giving a rustic appearance.
Width: 600, 200 mm
Length: 600 mm
... used to close off the underfloor plenum. Finally, there are equipments to better exploit air-conditioning systems, such as grills to make air flow from underfloor, and accessories for electricity and telephone connections, ...
Width: 10 mm
Length: 30, 20, 40 mm
... according to the EN 17192 European standard. FITT Agix® Cross is the complete and modular, quiet and performing Heat Recovery Ventilation solution that easily adapts to any installation condition to offer the best dual ...
Width: 500 mm - 1,500 mm
Length: 500 mm - 3,000 mm
Thickness: 35 mm - 60 mm
GRILL-TAS Z enables the renovation of air inside the facilities, regardless whether it is made of concrete, sandwich panel or any other material. It works along with a ventilation system installed ...
Width: 985 mm - 2,000 mm
Length: 985 mm - 2,000 mm
... Hamburg, is a burglar-resistant, RC3-tested ventilation grid made of aluminium with a free ventilation cross section of 36%. You can gain security and still not have to do without fresh air or ventilation ...
MLL-HAMBURG®
Width: 985 mm - 2,000 mm
Length: 985 mm - 2,000 mm
... MLL Hamburg, is a burglar-resistant, RC3-tested ventilation grid made of aluminium with a free ventilation cross section of 36%. You can gain security and still not have to do without fresh air or ventilation ...
MLL-HAMBURG®
MLL ventilation grilles, sliding water safe weather protection grille of aluminum with a free ventilation cross-section of 39%. Fixed version. Installation is purposed against the masonry openings. Light ...
MLL-HAMBURG®
Width: 100 mm - 500 mm
Length: 200 mm - 1,000 mm
Supply air grilles are suitable for use in ventilation, heating and air-conditioning systems. Thanks to the adjustment of the movable blades, optimum air distribution is achieved. Model 2SH. Single deflection grille ...
SAMOVENT TECHNIK,S.L
Width: 100 mm - 500 mm
Length: 200 mm - 1,000 mm
Supply air grilles are suitable for use in ventilation, heating and air-conditioning systems. Thanks to the adjustment of the movable blades, optimum air distribution is achieved. Model 2SV. Single deflection grille ...
SAMOVENT TECHNIK,S.L
Width: 100 mm - 500 mm
Length: 200 mm - 1,000 mm
Supply air grilles are suitable for use in ventilation, heating and air-conditioning systems. Thanks to the adjustment of the movable blades, optimum air distribution is achieved. Model 2DH. Double deflection grille ...
SAMOVENT TECHNIK,S.L
• Outside grille • White (cf. RAL 9016) • Incl. fixing set
Width: 294, 594, 669 mm
Length: 594, 669 mm
The grille type FH101/201/371/711/771/781 is used for the exhaust of air in facilities such as offices, warehouses, work-shops, etc. The grille can be used for wall or duct mounting where the surroundings have to be safeguarded against ...
GRADA International
Width: 75 mm - 900 mm
Length: 100 mm - 1,050 mm
The grille type AH710/770/780 is used for the exhaust of air in facilities such as offices, warehouses, workshops, ... The grille can be used for wall or duct mounting in situations where the surroundings have to be safeguarded against ...
GRADA International
Width: 100 mm - 550 mm
Length: 100 mm - 750 mm
The grille type GK250 is used for air exhaust in facilities such as offices, workshops, warehouses, shopping centres, etc. The grille can be used for wall or duct mounting Execution in steel, standard finish painted white (RAL9010) Wall Transfer Exhaust Rectangular ...
GRADA International
Width: 175 mm
Length: 175 mm
Thickness: 15 mm
Decorative grill for external or internal use, produced in high density polystyrene and handcrafted with stone/plaster effect resin for exteriors. The grill is easily applied to the wall and can be painted ...
Eleni Decor
Width: 175 mm
Length: 175 mm
Thickness: 15 mm
Decorative grill for external or internal use, produced in high density polystyrene and handcrafted with stone/plaster effect resin for exteriors. The grill is easily applied to the wall and can be painted ...
Eleni Decor
Width: 175 mm
Length: 175 mm
Thickness: 15 mm
Decorative grill for external or internal use, produced in high density polystyrene and handcrafted with stone/plaster effect resin for exteriors. The grill is easily applied to the wall and can be painted ...
Eleni Decor
Width: 315 mm - 1,215 mm
Length: 65, 115, 215, 315 mm
Can be used as a single grid or as an attached part for grids and outlets. Suitable for air flow rate adjustment for grilles and air diffusers. On request, the hit-and-miss damper can be supplied with a one- or two-sided flange.
SCHAKO KG
Width: 426 mm - 2,326 mm
Length: 658 mm - 3,451 mm
... provide either inlet or extract ventilation as well as permit the entry of natural daylight, and is suited to most kinds of industrial and commercial buildings. FCO is not tested or certified for smoke ...
COLT FRANCE
Width: 150 mm - 1,000 mm
Adjustable ventilation grille Horizontal fixed front blades and vertical directional back blades Can be mounted with or without mouting frame Horizontal fixed front blades in demountable louvre assembly (flow pattern ...
FLAKT WOODS
Width: 75, 125, 225 mm
Length: 225, 325, 425 mm
... steel diffusion grille with one or two rows of adjustable blades. It is adequate for usage as a standard ventilation element in industrial and commercial premises. The NOVA-C diffusion grille directs ...
Width: 163, 155 mm
Length: 230, 155 mm
... peak airflow > 50 m3/h (kitchen) Bahia Curve S (normal/boost airflow) for peak airflow < 50 m3/h (bath/WC) Bahia Curve Commercial S and L Bahia Curve BUS Kitchen (Enables to control peak airflow in kitchen and boost ...
ALDES
Width: 315 mm
Length: 130 mm
Thickness: 17 mm
Dark-brown thermo-wood ventilation grill art. no. 85736 Big for air passage approx. 100 cm² installation dim.: WxHxD approx. 295x105x9 mm exterior dim.: WxHxD approx. 315x130x17 mm weight approx. 275 g
Eliga
Width: 56 mm - 520 mm
Length: 200 mm - 2,900 mm
Width: 80 mm - 1,250 mm
Length: 80 mm - 1,250 mm
Valve for outdoor air intake and extract air discharge. Designed with a fixed louvre. Ø 80-1250 is equipped with net. Mesh width 10 × 10 mm. Screws or nails connect to an external wall. Delivery as standard with bird net. Characteristic ...
Width: 150 mm - 600 mm
Length: 300, 200, 500, 400, 600 mm
Thickness: 60, 100 mm
Fireproof grill for natural ventilation AF FIREGRILLE is a fire protection grill for air exchange areas. The product is made with an external structure in steel sheet (up to 300x300 ...
Drim grille is upply and exhaust ventilation grill designed for installing a decorative panel. Adapted for mounting on both walls and ceiling. We offer a choice of glass and polymer panels in many colors, ...
airRoxy Sp. z o.o.
Length: 0 mm - 6,000 mm
Standard: 17 mm distances between bars, 13 mm pitch. Distances made of black PVC. Option: PCV Spacing available in the following colours: grey, beige, light brown, dark brown. The maximum length of a single piece of grille is ...
Verano Konwektor
The RSH-5700 offers one of the best combinations of airflow, rain defence and spacial efficiency of any louvre in the market with Class A rain defence up to 3 m/s. Featuring a complex, extruded aluminium blade profile this high performance ...
CS Construction Specialties
High performing louvres offering great protection against wind-driven rain penetration, good airflow and a continuous line appearance on a façade. Complex extruded blade design for maximum rain defence performance Multiple channels ...
CS Construction Specialties
High performing louvres with vertical blades and visible mullions, offering excellent protection against wind-driven rain penetration and good airflow. Complex extruded blade design in vertical arrangement for maximum rain defence ...
CS Construction Specialties
Width: 1,200 mm
Length: 151 mm
Thickness: 20 mm
Kebony ventilation profile is used to increase ventilation and improve drainage on decks. The ventilation profile reduces water splashing against the facade. The product can be used ...
... perforated metal sheets with 1000 h resistance in salt spray test. The result: 7 % more air flow compared to traditional ventilation grilles. Highly effective, durable, and from one reliable source: Your expert ...
The PVDF Aluminum panel from our factory is made of high-strength aluminum alloy. PVDF coating. The thickness of panel can requested from 1.0mm to 30mm. The PVDF aluminum panel mainly consists of panel, stiffener and hanger, and working ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how ArchiExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining