|
|
Insulated Panels:
Kingspan Insulated Panels has almost single-handedly been responsible for the development of the market for insulated cladding panels in the UK and Irish markets. Kingspan is the most highly recognised brand for insulated cladding panels in the markets which it services across Europe.
Competitive strengths:
Strong European market leader
Highly specified brand
Solution provider
|
|
HardiePlank™ Siding is a colourful and versatile product that flies in the face of convention. Not only does it offer freedom, flexibility and freshness for your designs, the warranty guarantees that it will still look great year after year. HardiePlank™ Siding has the texture and good looks of wood but the durability to stand up to the toughest conditions, including the ability to resist fire and insect damage. It is also very easy to work with. So now you can promise your clients the great look of wood but without the hassle.
HardiePlank™ Siding is a fibre cement weatherboard that can be attached horizontally, vertically or diagonally to the exterior or interior facades of buildings. It is made with a lightweight material which requires less supporting framework and foundations than other building products. Because it is quick and easy to install, it does not require scheduling of specialist trades, so you can finish the job sooner. HardiePlank™ Siding is less messy on site than wet trades, so your clean-up costs are lower.
|
|
The HardiePlank™ Siding family also includes HardieTrim™ Siding, a product that adds the finishing touch to a beautiful, lasting home. HardieTrim™ Siding, needless to say, provides the same aesthetic appeal and durability you can expect from Hardiplank® Siding. It provides an unmatched finish for corners, columns, windows, eaves and doorways.
HardieTrim™ Siding resists scratches and will not peel, chip or crack. Which means that, unlike wood, its natural wood texture retains its beauty for decades with very little care. And that makes it not just a versatile product but a very economical one, too.
|
|
|
HardiePanel™ Vertical Siding is a colourful and versatile product that flies in the face of convention. Not only does it offer freedom, flexibility and freshness for your designs, the warranty guarantees that it will still look great year after year. HardiePanel™ Vertical Siding is available in 4 textures: smooth, stucco, cedar, and sierra 8. This cladding has the durability to stand up to the toughest conditions, including the ability to resist fire and insect damage. It is also very easy to work with. So now you can promise your clients the great look, but without the hassle.
|
|
Product:
Fire resistant A2 and B1 certified by CSTB France, ASTM USA and Russia etc.
Wood / Stone Look on PVDF and Polyester
DIBOND major color: red, black, white, bleu, ivory, yellow, green etc.
Capacity:
Area of the industrial park is 60, 000 m2. We have 3 coating lines so that we can control well the surface of the panel. We have 6 composite lines. We work 24 hours.
Quality:
We have our own three laboratories: mechanical, chemistry and physical. We can test by ourselves more than 20 kinds of test on ACP. We do 8 tests on coating lines and 6 when composing. And we will collect randomly the sample for every order. All the test result should be superior to the Chinese national norm and our WILLSTRONG interior norm.
Certificate:
We have obtained the Fire resistant B1 of CSTB France, Quality certified of Romania, Quality certified and fire resistant B1 of Russia, ASTM standard test etc.
Important project:
Paris Capital International Airport (Airport of Charles de Gaulle) has used WILLSTRONG 6mm, 0.5mm, Fire resistant B1 on its façade. We earned this project with the constructor French. In USD, we have Marvell-Technology Group building of Santa Clara, CA. The Federation Mansion of Russia in Moscow, the highest building in Europe has used also WILLSTRONG panel.
|
|
WILLSTRONG® Standard ACP, consists of an extruded thermoplastic core laminated between two sheets of aluminum, create a masterpiece in the history of development of WILLSTRONG.
By utilizing Kynar500® PVDF(70% Polyvinylidene Difluoride) and excellent Polyester coating, WILLSTRONG® Standard ACP is featured with excellent durability and flexibility, chemical resistance, superior ability to withstand humidity, impact, mortar, salt fog, graffiti and alkaline. Furthermore, WILLSTRONG® Standard ACP exhibits excellent resistance to color change, chalking, out-standing color and good gloss retention.
Descriptions:
Standard size: 1220mm x 2440mm x 4mm
Aluminum skin thickness: 0.3mm, 0.4mm, 0.5mm
Optional width: 1250mm, 1500mm
Optional length: upon request, max up to 6100mm
Core layer: recycled Polyethylene, virgin polyethylene
Coating finishes: PVDF, Polyester
Application:
Owing to multi-color finishes and distinctive characteristics such as excellent flatness, strengh-to-weight ratio and rigidity, resistance to weather and abrasion, WILLSTRONG standard ACP is ideal for cladding application such as building facades, interior wall, circular column, balconies, ceiling, soffit, shop¡¯s fascia signs, shopfront, gas station, shopping malls, and auto body etc.. It is also gradually used in furnitures such as the placemat of the tables, bureau etc.
|
|
Realistic deep wood-grain texture without the maintenance and the upkeep of real wood.
Made of injection molded copolymer for superior quality.
Resists warping and impact at extreme temperature variations.
Standard color-thru panel with U.V. stabilizer to prevent discoloration.
Longer panel for faster installation.
Unlike fiber cement or wood composite panel sidings, Novik’s lightweight, 8', single course Cedar Plank panel is manageable for 1 person to install.
As easy to install as vinyl siding yet as natural and beautiful as real wood.
Stack-on panel system for ease of installation
|
|
PIZ is an innovative cladding system for every
kind ot building. PIZ was developed to satisfy the growing needs of the construction market in terms of energy savings and a better external
presentation of the structures. The system is designed for new construction and for renovating all buildings.
It can be mounted on any surface (reinforced cement, bricks, metal structures, ecc). When renovating no special preparation or
cleaning of the wall is necessary. Installation
is performed with simple mechanical operations that require neither manpower nor special components.
The structure is installed by securing light alloy guides on which the panels are fixed. The Panels are mounted in horizontal position. The panel is made by a modified fibre-reinforced cement mortar face coupled with a slab of insulating material. The most common methods are with both heights of the panels and also with planned alternation of height and width.
|
|
PIZ is an innovative cladding system for every
kind ot building. PIZ was developed to satisfy the growing needs of the construction market in terms of energy savings and a better external
presentation of the structures. The system is designed for new construction and for renovating all buildings.
It can be mounted on any surface (reinforced cement, bricks, metal structures, ecc). When renovating no special preparation or
cleaning of the wall is necessary. Installation
is performed with simple mechanical operations that require neither manpower nor special components.
The structure is installed by securing light alloy guides on which the panels are fixed. The Panels are mounted in horizontal position. The panel is made by a modified fibre-reinforced cement mortar face coupled with a slab of insulating material. The most common methods are with both heights of the panels and also with planned alternation of height and width.
|
|
PIZ is an innovative cladding system for every
kind ot building. PIZ was developed to satisfy the growing needs of the construction market in terms of energy savings and a better external
presentation of the structures. The system is designed for new construction and for renovating all buildings.
It can be mounted on any surface (reinforced cement, bricks, metal structures, ecc). When renovating no special preparation or
cleaning of the wall is necessary. Installation
is performed with simple mechanical operations that require neither manpower nor special components.
The structure is installed by securing light alloy guides on which the panels are fixed. The Panels are mounted in horizontal position. The panel is made by a modified fibre-reinforced cement mortar face coupled with a slab of insulating material. The most common methods are with both heights of the panels and also with planned alternation of height and width.
|
|
PIZ is an innovative cladding system for every
kind ot building. PIZ was developed to satisfy the growing needs of the construction market in terms of energy savings and a better external
presentation of the structures. The system is designed for new construction and for renovating all buildings.
It can be mounted on any surface (reinforced cement, bricks, metal structures, ecc). When renovating no special preparation or
cleaning of the wall is necessary. Installation
is performed with simple mechanical operations that require neither manpower nor special components.
The structure is installed by securing light alloy guides on which the panels are fixed. The Panels are mounted in horizontal position. The panel is made by a modified fibre-reinforced cement mortar face coupled with a slab of insulating material. The most common methods are with both heights of the panels and also with planned alternation of height and width.
|
|
PIZ is an innovative cladding system for every
kind ot building. PIZ was developed to satisfy the growing needs of the construction market in terms of energy savings and a better external
presentation of the structures. The system is designed for new construction and for renovating all buildings.
It can be mounted on any surface (reinforced cement, bricks, metal structures, ecc). When renovating no special preparation or
cleaning of the wall is necessary. Installation
is performed with simple mechanical operations that require neither manpower nor special components.
The structure is installed by securing light alloy guides on which the panels are fixed. The Panels are mounted in horizontal position. The panel is made by a modified fibre-reinforced cement mortar face coupled with a slab of insulating material. The most common methods are with both heights of the panels and also with planned alternation of height and width.
|
|
|
A flat composite façade panel system with recessed edges offering a choice of bespoke wall solutions
|
|
P9580 wall cladding and gable end plank:
These cladding planks are mounted horizontally on a vertical lattice, producing a gable-ended (overlapping or weather board) effect.
Useful width: 200 mm
Total thickness: 17,5 mm
Tongue and groove assembly.
The system comes complete with all the required finishing profiles.
|
|
P9558 flat cladding profile for walls ands gable ends.
These planks produce a flat surface with a straight U-groove.
Useful width: 165 mm
Total thickness: 13,5 mm
Tongue and groove assembly.
The system comes complete with all the required finishing profiles.
|
|
P9581 double plank for wall cladding and gable ends:
This double plank is mounted horizontally on a vertical lattice, producing a cladding with an overlapping or weather board effect.
Useful width: 250 mm
Total thickness: 17,5 mm
Tongue and groove assembly.
The system comes complete with all the required finishing profiles.
|
|
P9553 vertical plank for extrenal wall cladding and gable ends:
These planks are mounted vertically on a horizontal lattice, producing a Scandinavian panel effect
Useful width: 180 mm
Total thickness: 20 mm
Tongue and groove assembly.
The system comes complete with all the required finishing profiles.
|
|
VARIOPLANPLUS combines all positive features of former façades in just one single system.
The base component of this new façade system is our fibreglass, a material which we manufacture in a self-developed procedure and have successfully been using to produce our industrial doors for over 20 years.
Consistent further development of this material under special consideration of the requirements of façade-construction led to a flexible system with amazing characteristics.
Convince yourself of the immense variety of creative options and of the enormous cost-saving potential of VARIOPLANPLUS.
|
|
|
An LPBC approved built up acoustic roof and wall system with rock fibre non-combustible insulation, providing acoustic sound reduction and noise absorption
|
|
|
Light. Air. Easiness. The interplay of these forces converts any façade system to the Pflaum Linear façade system. Renovation, reconstruction, building up or building new - the Pflaum façade system grows with requirements. Individuals just expect more: of life, of architecture. Pflaum: more than ordinary; extra-ordinary.
|
|
|
Light. Air. Easiness. The interplay of these forces converts any façade system to the Pflaum Linear façade system. Renovation, reconstruction, building up or building new - the Pflaum façade system grows with requirements. Individuals just expect more: of life, of architecture. Pflaum: more than ordinary; extra-ordinary.
|
|
|
5x5! 25 colour tones, unique combinations; the Pflaum Colour Spectrum adds colour to the architectural workday. The new way of thinking: brightness instead of grey halls. Behind every façade is a suitable spirit. Visit the coloured mentality of Pflaum.
|
|
|
Areas. Joints. Phantasy. Freedom of Geometry, made by Pflaum sandwich panels. Well known as "Designpanel", this element points the way to the architectural future. Excellent thermal insulation, high stability and high performance in combination with an easy assembly makes the Pflaum sandwich pnel to a modular challenge of th emulti-layer building system.
|
|
|
Rousing! Europeans architects are burning interested in PHaum fire resistant panels. Due to technical Know-How, varieties of colour and shape and top quality this panel Is the new flame of our customers. In the limelight! Composite panels, non-combustible insulation, fire resistance up to F180. A modular alternative tor a beautiful, extra-ordinary lifestyle!
|
|
We’d like to introduce ourselves as a leading manufacturer specialized manufacture various kinds of Aluminum Composite Panel in China since 1995. Our brand name ALUTILE is very famous at China due to the superior quality. We have exported the products to many countries. You can be assured of our best quality and good after-sale services.
Now we are introducing our advantages for your reference.
1) ALUTILE Aluminum Composite Panel
We always insist on that quality is the first and good quality. Our brand name ALUTILE is awarded the Famous Brand in China due to the first class quality.
2) Most Advanced Production Lines & Testing Equipments
We imported six internationally most advanced automatic production lines, which can produce panel width from 1000mm-1570mm, annual output capacity reaches 3,600,000 square meters. We also places much emphasis on the quality control, all the raw materials and finish products are strictly tested by advanced equipment.
3) Good quality of raw materials
All the materials are selected with the best quality.
a) The aluminum coils are adopted high-quality aluminum alloy and purchased from the largest
supplier in China.
b) PVDF coating resin: 70% PVDF resin, Kynar 500, Hylar 5000, American PPG, Sweden BECKER,
Guarantee Time: 20 years
c) The bond material (High-molecular film) adopted from American Dupont company.
d) Surface treatment adopted Germany Henkel film technology
e) Protective film imported from France Novacel Company and Germany Polifilm Company
For more information about our company and products, you can visit our website http://www.alutile.com
|
|
We’d like to introduce ourselves as a leading manufacturer specialized manufacture various kinds of Aluminum Composite Panel in China since 1995. Our brand name ALUTILE is very famous at China due to the superior quality. We have exported the products to many countries. You can be assured of our best quality and good after-sale services.
Now we are introducing our advantages for your reference.
1) ALUTILE Aluminum Composite Panel
We always insist on that quality is the first and good quality. Our brand name ALUTILE is awarded the Famous Brand in China due to the first class quality.
2) Most Advanced Production Lines & Testing Equipments
We imported six internationally most advanced automatic production lines, which can produce panel width from 1000mm-1570mm, annual output capacity reaches 3,600,000 square meters. We also places much emphasis on the quality control, all the raw materials and finish products are strictly tested by advanced equipment.
3) Good quality of raw materials
All the materials are selected with the best quality.
a) The aluminum coils are adopted high-quality aluminum alloy and purchased from the largest
supplier in China.
b) PVDF coating resin: 70% PVDF resin, Kynar 500, Hylar 5000, American PPG, Sweden BECKER,
Guarantee Time: 20 years
c) The bond material (High-molecular film) adopted from American Dupont company.
d) Surface treatment adopted Germany Henkel film technology
e) Protective film imported from France Novacel Company and Germany Polifilm Company
For more information about our company and products, you can visit our website http://www.alutile.com
|
|
We’d like to introduce ourselves as a leading manufacturer specialized manufacture various kinds of Aluminum Composite Panel in China since 1995. Our brand name ALUTILE is very famous at China due to the superior quality. We have exported the products to many countries. You can be assured of our best quality and good after-sale services.
Now we are introducing our advantages for your reference.
1) ALUTILE Aluminum Composite Panel
We always insist on that quality is the first and good quality. Our brand name ALUTILE is awarded the Famous Brand in China due to the first class quality.
2) Most Advanced Production Lines & Testing Equipments
We imported six internationally most advanced automatic production lines, which can produce panel width from 1000mm-1570mm, annual output capacity reaches 3,600,000 square meters. We also places much emphasis on the quality control, all the raw materials and finish products are strictly tested by advanced equipment.
3) Good quality of raw materials
All the materials are selected with the best quality.
a) The aluminum coils are adopted high-quality aluminum alloy and purchased from the largest
supplier in China.
b) PVDF coating resin: 70% PVDF resin, Kynar 500, Hylar 5000, American PPG, Sweden BECKER,
Guarantee Time: 20 years
c) The bond material (High-molecular film) adopted from American Dupont company.
d) Surface treatment adopted Germany Henkel film technology
e) Protective film imported from France Novacel Company and Germany Polifilm Company
For more information about our company and products, you can visit our website http://www.alutile.com
|
|
PIZ is an innovative cladding system for every
kind ot building. PIZ was developed to satisfy the growing needs of the construction market in terms of energy savings and a better external
presentation of the structures. The system is designed for new construction and for renovating all buildings.
It can be mounted on any surface (reinforced cement, bricks, metal structures, ecc). When renovating no special preparation or
cleaning of the wall is necessary. Installation
is performed with simple mechanical operations that require neither manpower nor special components.
The structure is installed by securing light alloy guides on which the panels are fixed. The Panels are mounted in horizontal position. The panel is made by a modified fibre-reinforced cement mortar face coupled with a slab of insulating material. The most common methods are with both heights of the panels and also with planned alternation of height and width.
|
|
|
