|
|
|
Turnbuckle jaw-press small terminal suitable for tensional structure and banisters made of stainless steel Aisi 304 and Aisi 316
|
|
The new Macalloy compression struts are available in stainless and carbon steel in diameters M12 to M100 and provide an architectural solution for structural members that are required to act in compression.
A typical Macalloy compression strut utilises standard Macalloy 460 and 520 fork end fittings and pin sets. These connect to specially designed cones that in turn are welded onto each end of a CHS (circular hollow sections).
The use of the Macalloy systems as a compression strut is also approved in Germany by the Deutches Instit für Bautechnik under approval number Z-14.4-530.For further information please contact the Macalloy technical department.
|
|
|
|
|
|
- Hot Dip galvanized.
- End fittings are Quenched and Tempered, bodies heat treated by normalizing.
- Hooks are forged with a greater cross sectional area that results in stronger hook with better fatigue properties.
- Modified UNJ thread for improved fatigue properties.
- Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckle sizes 1/4" through 2 1/2", a shackle one size smaller can be reeved through eye.
- Forged jaw ends are fitted with bolts and nuts on sizes 1/4" through 5/8", and pins and cotters on sizes 3/4" through 2 3/4".
- TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.
- Lock Nuts available for all sizes.
- Crosby's Quenched and Tempered end fittings and normalized bodies have enhanced impact properties for greater toughness at all temperatures.
- Typical hardness levels, Tensile Strengths and Ductility Properties are available for all sizes.
- Turnbuckles can be furnished proof tested or magnaflux inspected with certificates if requested at time of order.
- Turnbuckle assembly combinations include: Eye and Eye, Hook and Hook, Hook and Eye, Jaw and Jaw, Jaw and Eye.
|
|
|
|
