- Building & Construction >
- Building material >
- Concrete adhesive mortar
Concrete adhesive mortar
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Capacity in Kg: 10, 20 kg
Rapid Setting Flexible Adhesive • Ceramic & procelain tiles • Use with underfloor heating encapsulated in a levelling compound • Use with plywood overboard (min 15mm) • Ready to grout in 3 hours
MAPEI
Capacity in Kg: 20 kg
High-performance cementitious adhesive with rapid setting, no vertical slip and extended open time for the installation of ceramic and porcelain tiles, porcelain stoneware, natural stones, vitreous and ceramic mosaics ...
Capacity in Kg: 1 kg
Single component quick-setting adhesive grout for the bonding and sealing of Litoband waterproofing tape. For interiors and exteriors. advantages and features Single component Easy to apply
Capacity in Kg: 25 kg
High-yield, hydraulically setting tile adhesive with an extended open time, making it very smooth to work with. The tile adhesive is also waterproof and frost-resistant, as well as being particularly ...
... grey adhesive for interior and exterior floors and walls Use AD 8 is used for cementing ceramic tiles, gres, marble etc. onto lime and cement based foundation plasters, long-standing, dry cementitious floor screeds ...
Fassa Bortolo
... cracks For small anchorings of connectors in concrete, wood and masonry As an adhesive and as finishing plaster for concrete, prefabricated concrete elements and slabs ...
Capacity in Kg: 25 kg
Exclusive Kerakoll geo‑binder based, structural flexible multi‑purpose gel adhesive for bonding all types of material, on all substrates, and for all use, even in extreme conditions. Eco‑friendly. Ideal for large format ...
KERAKOLL
... product, fast hard, with excellent adhesion on concrete substrates. Usages Casting for airport runway and taxi lights Putty for service canals and seating for runway lights Preparation of the substrate • Concrete ...
EPOXY POLY-AMINOAMIDE PUTTY, EASY TO USE (A+B). Two component product based on epoxy resins and poly-aminoamide hardeners, easy to be used (the 2 ingredients have to be added in the same concentration in volume). No shrinkages, no leaks. ...
ROEFIX
It is a plaster-based adhesive with special additives that make it an ideal product to cover interior walls of masonry, concrete block, partition wall and concrete walls, with PANEL REY® ...
One-component, large-grained cementitious mortar for bonding and levelling insulation panels and for thermal insulation systems. TECHNICAL DATA: Consistency: powder. Colour: grey and white Density of the mix (kg/m³): ...
MAPEI FRANCE
Capacity in Kg: 15, 5 kg
two-component modified epoxy resin adhesive for sealing the concrete crack Application: Repair of high-strength concrete surface defects and pits; leveling construction ...
Sino-sina building materials co., ltd
Capacity in Kg: 25 kg
Fiber reinforced polymer-modified thermal insulation adhesive mortar DOMOSHIELD is a single-component fiber reinforced, resin-modified cement based adhesive, ideal for bonding and ...
Capacity in Kg: 25 kg
Terramix Fine is a repair mortar and thin layer plaster for repairs and levelling up to 1 – 3mm thickness. Terramix Fine is formulated for plastering and repair of exterior and interior surfaces. It gives a hard, smooth, ...
Terraco LLC. Ltd
Capacity in Kg: 25, 5 kg
... Aplicare The adhesive is spread on a 4 to 5 mm layer, after which the comb is pulled with serrated trowel 6-8 mm, depending on the size of the boards. The open time for soldering is 15 to 20 minutes. When applied externally, ...
AdePlast
Capacity in Kg: 25 kg
... Typical Applications Leak sealing prior to tanking with Newton liquid waterproofing products. Sealing of leaks at wall/floor junctions. Sealing of leaking mortar ...
Capacity in Kg: 25 kg
High-adhesion bonding mortar ISOCOL EXPERT is a bonding mortar which provides great BENEFITS in bonding all types of interior composite thermal insulation: plasterboard, polystyrene, glass wool. BENEFITS • ...
SEMIN
Capacity in Kg: 25 kg
TAOUAB PLACO mortar is a product formulated with plaster. It is used to lay plasterboard indoors and also to fill in non-adjoining sheets. Features • Mixing rate : 0.40 % - 0.50 % . • Water retained : 2-4 mm. • ...
Adhesive for mounting Styrofoam panels in thermal insulation systems dedicated for external walls. Can be applied on various types of mineral groundworks: concrete, cement-lime, ceramic, silicate, ...
Kreisel
The products of Team Cemento Cerato, have a high technological and environmental content, can be used, as well as in the construction sector, also in other areas of production, such as construction, restoration, furniture, shipbuilding ...
Capacity in Kg: 15 kg
... applications), it is recommended to replace water with Bisazza latex ULTRA to the Ad Hoc adhesive. Compatible substrates cementitious substrates (reinforced concrete, smooth renders or screeds) plasterboard ...
... product composition and the various chemical-physical reactions with the mortar on the casting surface enable the elimination of unaesthetic micro and macro surface blisters from the concrete, improving ...
This product is suggested for a perfect release of all form liners with high section finishes and with undercuts. Range of application: External Release Agent for manufacturing PUR, mainly cold flexible foams Properties: ...
... formed. The mortar consistency must not be too thin or stick to hands. Do not prepare more mortar than for 15 minutes of work at a time. (It is recommend to use the application technology at a semi-dry ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how ArchiExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining