|
|
PROTEK MAGIC BOX DOMOTIKA
DOUBLE for solid / plastered wall
Metallic system with zinc-plated sheet model PROTEK MAGIC BOX DOMOTIKA, with structure of 114/138/164 mm for interior dividing wall made of airbricks / a structure of plaster, with a total thickness of finished wall of 150/174/200 mm, composed by two lateral frames for the disappearing sliding of two rigid doors supplier with opposite opening, including:
- Insulated and thermo-isolated tubes with high-density ESP – according to the EN 13163 – which allow the passage of hydro-termo and electrical connections with a diameter max of 2’’ (model of 164 mm);
- Flexible and corrugate extinguishable pipes in PVC, according to CEI-EN 50086-1 for electrical wiring;
- Predisposition of frame to host, in many points, electrical boxes with a max of 4 cabled modulus each.
- Max payload: 120 kg.
This model is avaible for SINGLE too. |
|
Features:
It is the only system already equipped with pliable and self-extinguishable pipes in PVC according to CEI EN 50086 canalized and completely insulate directly in the structure to host the electrical boxes anywhere in the system.
(Suitable also for four switches in one electrical box).
Indispensable for civil and public spaces such as hotels, hospitals, and all the spaces where you need to use all the avaible space for electrical connections.
Structure
The single "base" is the innovation.In the photo there are two examples of the possible positions to host electrical connections
... Even 20 each side! It is particulary suitable for bathrooms furniture children's bedroom, closets, and walk in wardrobes manufacturers.
1 minute set-up without any tools! |
|
ECLISSE NOVANTA
STUD WALL version. Counterframe for sectional door.
Counterframe hosting a sectional door: while one part disappears into the
compartment, the other opens and offers a standard doorway with limited
overall dimensions.
NON STANDARD SIZES
Counterframes are also available with lengths ranging from 600 mm to 1200 mm and heights ranging from 1000 mm to 2600 mm (50 mm difference between the various sizes).
WARNING
When using frame having 54 mm internal space, it is recommended to use a door panel furniture with max. thickness 43mm (including a possible pane-holding profile). The standard capacity load amounts to 80 kg, on request 120 kg.
ADVANTAGES
The counterframes by ECLISSE are:
- Robust for greater reliability and duration.
- They can be checked to have doors manufacturer always sliding properly. |
|
| Counterframe that hosts two parallel doors supplier that slide furniture in the opposite direction and disappear into the same compartment, thus offering an innovative solution to save space. |
|
PROTEK LINEAR SINGLE
for solid wall
Metallic system with zinc-plated sheet model PROTEK LINEAR, including aluminium fore, posterior and frame-mesh uprights, with structure of 69 mm, for interior dividing wall made of airbricks of 8 cm and total thickness of finished wall of 10.5 cm, suitable to host a disappearing sliding door suppliers panel furniture with a thickness of max 43 mm and a weight of max 120 kg. This system, which is provided of one cart-system kit, does not count the application of door supplier posts and covering profiles.
This model is avaible for DOUBLE too.
PROTEK LINEAR SINGLE
for plastered wall
Metallic system with zinc-plated sheet model PROTEK LINEAR, including aluminium fore, posterior and frame-mesh uprights, with structure of 57 mm, for interior dividing wall of plaster made of metallic profiles of 75 mm, for total thickness of finished wall of 10 cm, suitable to host a disappearing sliding door panel with a thickness of max 40 mm and a weight of max 120 kg. This system, which does not count the application of door posts and covering profiles, includes one cart-system kit and a set of screws for plaster of 19 mm.
This model is avaible for DOUBLE too. |
|
Particolarità:
È il controtelaio standard per eccellenza infatti è predisposto per lo scorrimento di una sola anta, è ideale per eliminare tutti i problemi di spazio e per arredare con vero stile la tua casa.
È la soluzione ottimale per tutti quei locali dove recuperare lo spazio abitativo e d’arredamento è di estrema importanza (cucina, bagno, ripostigli, camerette). Ideale anche per strutture pubbliche (ristoranti, alberghi, ospedali, ecc.).
È disponibile anche il modello “Magic Box” con la predisposizione per le prese elettriche e per i tubi idraulici.
Struttura
Il controtelaio “Protek” è pronto in un minuto non richiede l'utilizzo né di cacciaviti né di viti poiché il montaggio avviene completamente ad incastro. Struttura ad alta resistenza. 1 minute set-up.
Scorrimento estremamente silenzioso! |
|
PROTEK DOUBLE
for solid wall
Metallic system with zinc-plated sheet model PROTEK DOUBLE, with structure of 57/69/89/114 mm for interior dividing wall made of airbricks of 6/8/10/12 cm with global thickness finished wall of 90/105/125/150 mm, composed by two lateral frames for the disappearing sliding of two doors furniture with central closure. Max payload: 120 kg.
This model is avaible for SINGLE too.
PROTEK DOUBLE
for plastered wall
Metallic system with zinc-plated sheet model PROTEK DOUBLE, with structure of 57/82/107 mm for interior dividing wall made of airbricks of plaster structure with global thickness finished wall of 100/125/150 mm, composed by two lateral frames for the disappearing sliding of two doors with central closure. Max payload: 120 kg.
This model is avaible for SINGLE too. |
|
PROTEK DOUBLE HINGE FURNITURE FOR EXTERNAL USE
Double
System with profiles of zinc-plated sheet, aluminium and inox steel, model PROTEK DOUBLE PROJECTED WITH DOUBLE HINGE, with structure of 114/138/164 mm and total thickness of 150/174/200 mm, put in external perimetral walls, suitable to host two shutters furniture or irons bars, disappearing opposite sliding, max weight of 120 kg each. In the box we provide 4 self-lubricating cart-system kits equipped with rectified pivots, each with max payload: 120 kg.
This model is avaible for SINGLE and SINGLE HINGE too. |
|
UNICO DD
SOLID WALL version. Counterframe for 2 mirror-like doors manufacturers.
Counterframe with two opposed disappearing sliding doors manufacturers: ideal to easily
unite or separate two different rooms when necessary. It saves space and makes your room more practical.
NON STANDARD SIZES
Counterframes are also available with lengths ranging from 600+600 mm to 1200+1200 mm and heights ranging from 500 mm to 2600 mm (50 mm
difference between the various sizes).
SPECIAL TREATMENTS AND MODELS
Treatments: HEAT PROTECTION; ANTI-CORROSION
Models: IDRO; SIDERALE
WARNING
When using frame having 54 mm internal space, it is recommended to use a door panel furniture with max. thickness 40 mm (including a possible pane-holding profile). The standard capacity load amounts to 80 kg, on request 120 kg.
ADVANTAGES
The counterframes by ECLISSE are:
- Robust for greater reliability and duration.
- They can be checked to have doors always sliding properly.
- They can be customised with accessories to make your rooms more practical. |
|
An exclusive product that results from our long experience. Eclisse LUCE is the first counterframe that allows drawing the wires and mounting the electric boxes (max. 5 on each side) in the wall hosting the disappearing doors manufacturers. A further opportunity to save space and customise it.
NON STANDARD SIZES
Counterframes are also available with lengths ranging from 600 mm
to 1300 mm and heights ranging from 1000 mm to 2600 mm (50 mm
difference between the various sizes).
SPECIAL TREATMENTS: ANTI-CORROSION
WARNING
It is recommended to use a door panel furniture with max. thickness 43 mm (including a possible pane-holding profile).The standard capacity load amounts to 80 kg, on request 120 kg. Electric boxes thickness is 40 mm (2 boxes are included)
ADVANTAGES
The counterframes by ECLISSE are:
- Robust for greater reliability and duration.
- They can be checked to have doors always sliding properly.
- They can be customised with accessories to make your rooms more practical. |
|
Features:
Have you got limited space? But would you like to have a traditional doorway.. it easy.. Using the driving system in a limited space you will install a reduce system but you will obtain a normal size doorway!
Driving is the system that hides two sliding doors disappering in the wall with closing/opening on the same side, right or left
Also avaible is the "driving" kit
Structure
It is a system with reduced measurements that through the simultaneous sliding of two disappering sliding doors manufacturers opening/closing on the same side offers the same doorway as traditional door. A special kit of driving (on request) enables the 'driving' of the opening on the same side |
|
CIRCULAR
STUD WALL version. Counterframe for curved door.
Counterframe for a curved concealed door. It is ideal for particularly elegant and sophisticated architectural solutions.
NON STANDARD SIZES
- Counterframes are also available with lengths ranging
from 600 mm to 1200 mm and heights ranging
from 1000 mm to 2600 mm
(50mm difference between the various sizes).
WARNING
The standard capacity load amounts to 80 kg.
ADVANTAGES
The counterframes by ECLISSE are:
- Robust for greater reliability and duration.
- They can be checked to have doors suppliers always sliding properly. |
|
TELESCOPIC
SOLID WALL version. Counterframe for 2 parallel doors suppliers.
Counterframe that hosts two parallel doors that slide furniture and disappear into
the same compartment, thus offering a wider doorway and smaller overall dimensions at the same time.
NON STANDARD SIZES
Counterframes are also available with lengths ranging from 600+600 mm
to 1200+1200 mm and heights ranging from 1000 mm to 2600 mm (50 mm
difference between the various sizes).
SPECIAL TREATMENTS AND MODELS
Treatments: ANTI-CORROSION
Models: SIDERALE
WARNING
- It is recommended to use a door panel furniture with max. thickness 43mm (including a possible pane-holding profile)
- The standard capacity load amounts to 80 kg, on request 120 kg.
ADVANTAGES
The counterframes by ECLISSE are:
- Robust for greater reliability and duration.
- They can be checked to have doors always sliding properly.
- They can be customised with accessories to make your rooms more practical. |
|
UNICO SD
STUD WALL version
NON STANDARD SIZES
- Counterframes are also available with lengths ranging from 600 mm to
1300 mm and heights ranging from 500 mm
to 2600 mm (50 mm difference between the various sizes).
WARNING
- When using frame having 54 mm internal space, it is
recommended to use a door panel furniture with max. thickness
43 mm (including a possible pane-holding profile).
- The standard capacity load amounts to 80 kg, on
request 120 kg.
ADVANTAGES
The counterframes by ECLISSE are:
- Robust for greater reliability and duration.
- They can be checked to have doors furniture always sliding properly.
- They can be customised with accessories to make your rooms more practical.
|
|
| the essential feature of this range doors furniture is a rounded frame design that enhances their sensuous lines. sublimia doors are also sublime in their velvet-smooth feel. this exceptional exterior hides intrinsic qualities stemming from the use of carefully selected composite materials and the most advanced manufacturing techniques, the unique sublimia range of doors has great appeal and strong character, and adapts perfectly to all uses. |
|
The Eclisse doors furniture are carried out on soaked crystal plates of safety on molten glass basis 10 mm thickness. The selected ornament comes reproduced by a technique from engraving (sanding) in with dimensions. To some models verrefondus in with dimensions one are applied decorated (sanded); it is necessary to however indicate during the order it with dimensions to sight of the ornament. The sliding doors entirely out of glass are equipped with handle or pommel, in fact purposely guide carries to ground and clamps to fix them at the system of Eclisse sliding motion.
All the panes are in conformity with the rules existing on the use for the private buildings and public (Rule PLAIN 7142 and PLAIN 7697). |
|
- The ARKIMEDE Double swing door system is innovative, neat and very elegant. It blends outstanding looks with cutting edge design design.
- Like the ARKIMEDE single door supplier, this door can be custom built to meet specialised requirements.
- The integration of the ARKIMEDE system into your designs is limited only by your imagination! |
|
- ARKIMEDE is our exclusive and patented system which allows a semi-circular door supplier to design slide into a curved wall.
- ARKIMEDE can be adapted to any proportion and can be used as both a single and double door manufacturers system in plastered and plasterboard walls.
- At SA & F we provide a specialised design and consultation service to meet your own requirements with this door system. |
|
We focus our attention on quality, combining the latest production methods with a highly trained workforce. Today we form a group able to meet our customers' needs.
ERMETIKA quality is constant in time: our pocket doors have been tested by Istituto Giordano and we give a twelve-year guarantee on all products.
OPTIONALS
1. Simultaneous opening kit
2. Sliding kit for glass door manufacturer
3. Jambs for DOPPIA ANTA models
4. Locks furniture and handles
|
|
We focus our attention on quality, combining the latest production methods with a highly trained workforce. Today we form a group able to meet our customers' needs.
ERMETIKA quality is constant in time: our pocket doors have been tested by Istituto Giordano and we give a twelve-year guarantee on all products.
OPTIONALS
1. Self-dosing kit
2. Sliding kit for glass door suppliers
3. Aluminium plated door jamb kit
4. Jambs for BASE models
5. Locks furniture and handles
|
|
- The STAFFETTA model superimposes two sliding doors suppliers in a single frame.
- When fully opened, a wide doorway is created although it is possible by means of the telescopic system to have the doors suppliers partially open.
- The STAFFETTA system is constructed to house two sliding doors and so the wall needs to be thicker to contain the pocket. |
|
PROTEK SKY SINGLE
lift – slide furniture window
Metallic system model PROTEK SKY with zinc-plated sheet, inox steel and insulated polystyrene panels furniture (thickness 20 mm on both sides), covered by a metallic net which makes the plastering adhere, with a structure of 125 mm and total thickness max of 224 mm, for the laying in external perimetral walls, counted for receiving a disappearing sliding lift-windows furniture. This system includes a wooden upright to install the sliding guide, a wooden support frame necessary for the finish, and it’s ready for the installation of the hardware for lift-slide windows (not provided).
This model is avaible for DOUBLE too. |
|
... see all the products in the category
Windows
|
|
|
