|
|
|
|
|
|
Bench of four places for exteriors, made completely with welded steel profiles.
Surface of seat of 2000x432 mm formed by the combination of steel profiles in the form of "T" and "L" of 80x80x8 mm, soldiers to the side armature, leaving a space of 8 mm between you lick.
Bread carré is available in two versions according to is its installation. It can be provided to be interlocked in the pavement, (200 mm under level 0 of the land) or can be provided to be fixed on the pavement, using specific stainless steel ironworks.
The empotrable version in the pavement can in addition incorporate as complement the endorsement: one Or invested, formed by the union of several profiles like used in the seat, and that with a length of 1680 mm locates the strongpoint to 980 mm of height, being separated of the seat 80 mm.
The bench is put under a process of galvanized by zinc immersion and epoxi is ended covering dust with a thickness of 150 microns.
Optionally, the bench can incorporate a species of rectangular cushion, made in theca wood or bolondo and measures of 550x430x30 mm that presents/displays you reduce that they allow the drainage of the water. This cushion can longitudinally be displaced on the surface of the seat, thanks to 4 elements of sliding, fixed to the wood by the part inferior of the bench, of such form that the cushion can be moved in the route which they allow the cracks of the seat, but in no case of being removed.
|
|
Material: Made of construction steel. 3 tropical wooden boards of 150 x 45mm. Stainless steel screws.
Finish: The legs are treated with ferrus which guarentees a high resistance to the rust conforming to the spray salt fog test. Silvery colour finished.
Tropical wood treated with a preventive product, lignus fungicide and insecticide and water proofed. Natural colour finished.
Recommended anchorage: M10 fixing bolts for anchoring to the ground, depending on the surface and the project.
|
|
Shaped aluminium slat seat
Steel frame
100% polyester baked anti-UV powder coating
Colour frame : black, anodic grey and savanna
Seat : all Fermob colors available
|
|
|
|
|
|
The Sedis seat, designed by Antonio Citterio with Toan Nguyen, gives you the choice of either sitting, or merely leaning, on either side and at two different heights, giving it various different uses, depending on your needs, how long you plan to stay and how intimate you are with other users. The seat and backrest are 40mm thick exotic wood treated with a water varnish, including the torsion version, the latter is made from independent, solid slats, therefore separately replaceable, have different shapes according to their position on the seat or backrest, with radii ranging from 20 to 150 mm. The angles are: lower seat = 3°, backrest = 13°, upper seat = 10°. The cast iron supports are sandblasted and polyester powder coated, where possible they are buried in the ground to give a lightness to the structure, or fixed externally through a 250x130 mm base plate with four holes to fix to the ground with bolts. The Sedis Torsion model, through its special form, allows up to 8 people, of which 4 can sit normally and 4 can lean.
Maximum dimensions of Torsion model / mm : L 2600 H 774, Hseat 455. Weight 88 kgs.
|
|
Mr. H is an exclusive and clever design of aluminium system Benches
Made 100% in anodized aluminium; a strong and the same time ductile material and with a big personality, that allows Mr. H to be useful indoor as well outdoor. Mr H is very profitable for public spaces, hospitality and also large scale official contracts tender. All the material use for Mr H are complete ecological and recyclable materials.
Mr.H is the result of all the experience and know-how of Joan Casas and all our R& I+D Indecasa’s Team .
|
|
DESIGN BY PETER STATHIS
Inviting and flexible, with seating access from either side, LO-SPEED is offered as a single bench and in a variety
of 'L' shapes, 'U' shapes and zigzag's. Extremely durable in public and private spaces, indoor and out. Aluminum
extruded seat with roto-molded polyethylene ends and 90° joining elements, 100% recyclable.
Natural anodized aluminum finish. Optional security mounting available.
Size: 76"l x 18.75"d x 18"h
|
|
Loco
LOCO, the system designed as street furniture and suitable for all public and private waiting areas. Indoors, outdoors, anywhere. With separate or composite benches. Basic or accessorised. Neutral or personalised. With numerous add-ons according to the location and function.
Logical and technological, stable and light, one or many, infinitely modular and recyclable. The LOCO system takes its form from a design concept that is unique and infinitely expandable: shelters, tables, speed bumps, notice boards, cycle holders, internet stations, gazebos all complete and enrich the seating arrangement.
|
|
Filo
FILO is the new concept in designer seating by ALL+, created to answer all the seating needs of public waiting areas in a strategic and elegant manner. Indoors and outdoors. With its steel load-bearing structure, the FILO line has seats and backrests in extruded aluminium that can be personalised with graphics and/or advertising. Versions are also available in painted aluminium and in coloured laminate.
|
|
 see the results for the following category : Benches |
|
|
