|
|
THERMIC, Belgian manufacturer of high-quality designer radiators, known for its innovative heating-technology, trend-setting design and unsurpassed quality.
As the trendsetter in the field of designer radiators Thermic proudly presents the new radiators in the range Zana-Line:
Type ZBD consists of horizontal rectangular steel precision tubes of 45 x 20 mm and
2 vertical round steel rear collectors measuring (ø 35 mm). ZBD is available with ½" connection (1-8/4-5). Due to the success of this type, we have added 3 new models, type ZBD in an electrical version (ZBD-EL), ZBD-DECO and ZBD-DECO in electrical version
(ZBD-DECO-EL)
Type ZBD-DECO is available in 3 heights and is characterised by its straight design and exceptional high heat output ! Type ZBD-DECO is also available with electrical element.
Type ZBD-EL and ZBD-DECO-EL are available in 3 heights, with a power varying between 750 and 1250 watts !
Both the ZBD-EL and the ZBD-Deco-EL are equipped with the new Thermoboost !
|
|
THERMIC, Belgian manufacturer of high-quality designer radiators, known for its innovative heating-technology, trend-setting design and unsurpassed quality.
As the trendsetter in the field of designer radiators Thermic proudly presents the new radiators in the range Zana-Line:
Type ZBD consists of horizontal rectangular steel precision tubes of 45 x 20 mm and
2 vertical round steel rear collectors measuring (ø 35 mm). ZBD is available with ½" connection (1-8/4-5). Due to the success of this type, we have added 3 new models, type ZBD in an electrical version (ZBD-EL), ZBD-DECO and ZBD-DECO in electrical version
(ZBD-DECO-EL)
Type ZBD-DECO is available in 3 heights and is characterised by its straight design and exceptional high heat output ! Type ZBD-DECO is also available with electrical element.
Type ZBD-EL and ZBD-DECO-EL are available in 3 heights, with a power varying between 750 and 1250 watts !
Both the ZBD-EL and the ZBD-Deco-EL are equipped with the new Thermoboost !
|
|
|
Caleido is pleased to present the new line Cut de Fine Design. Caleido indeed develops a new concept, that of the decorative element which becomes functional. The perforated plate of the Cut radiators indeed offers a fulcrum for the towels. A choice which answers the need for creating flexible products for a market increasingly riper and in constant evolution.
|
|
New model RIPPLE design by Antonio Bullo for FINE CALEIDO DESIGN. A radiator composed by a steel plate countermarked by a harmony of the lines and a total absence of the angles which guarantee a favorable collocation of the product.
The esthetic concept of model RIPPLE points out the good turning of water, fluid and without interruptions of continuity, a complement of furnishing of large appeal.
|
|
|
The radiators are equipped with a kit for fixing them to the wall and with an air valve. Chromate radiators NOT available. Testing pressure: 10,5 bar - Working pressure: 7 bar. The watt values are not definitive awaiting for DeltaT50 certification.
|
|
|
The radiators are equipped with a kit for fixing them to the wall and with an air valve. Chromate radiators NOT available. Testing pressure: 10,5 bar - Working pressure: 7 bar. The watt values are not definitive awaiting for DeltaT50 certification.
|
|
|
The radiators are equipped with a kit for fixing them to the wall and with an air valve. Chromate radiators NOT available. Testing pressure: 10,5 bar - Working pressure: 7 bar. The watt values are not definitive awaiting for DeltaT50 certification.
|
|
|
The radiators are equipped with a kit for fixing them to the wall and with an air valve. Testing pressure: 10,5 bar - Working pressure: 7 bar. The watt values are not definitive awaiting for DeltaT50 certification.
|
|
|
The radiators are equipped with a kit for fixing them to the wall and with an air valve. Chromate radiators NOT available. Testing pressure: 10,5 bar - Working pressure: 7 bar. The watt values are not definitive awaiting for DeltaT50 certification.
|
|
|
The radiators are equipped with a kit for fixing them to the wall and with an air valve. Chromate radiators NOT available. Testing pressure: 10,5 bar - Working pressure: 7 bar. The watt values are not definitive awaiting for DeltaT50 certification.
|
|
|
The radiators are equipped with a kit for fixing them to the wall and with an air valve. Chromate radiators NOT available. Testing pressure: 10,5 bar - Working pressure: 7 bar. The The watt values are not definitive awaiting for DeltaT 50 certification.
|
|
The overall size of the Vysa-MatTM Popular heating mats has been optimised so that they closely match the most common room sizes encountered.
Their specification is even superior to most others with an IP 67 rating that protects the heating cables in the event of short-term flooding under 1-m of water!
-Vysa-MatTM Popular heating mats rated 100W/m2 are generally suitable only for floor warming and comfort heating. However, larger areas in well insulated homes are often heated adequately using 100W/m2 - in well insulated Scandanavian houses they only use 80W/m2!
-Vysa-MatTM Popular heating mats rated 160W/m2 can provide primary heating for most medium sized rooms, including conservatories, where sub-floor insulation complies with building regulations
-Vysa-MatTM Popular heating mats rated 200W/m2 can provide primary heating for conservatories and all but the smallest rooms in the house
We do recommend that Vysa-PronTM insulation is installed to reduce energy costs and improve warm up times.
|
|
Vysa-MatTMClassic is our latest design of cable and incorporates PTFE (Teflon), which is far superior to any other material for electric underfloor heating applications, as the insulation material. We now offer a 'lifetime guarantee' as Teflon is virtually indestructible.
The exceptionally small profile of the heating cable makes Vysa-MatTMClassic ideally suited to installation within the adhesive layer - the method preferred by professional floor tilers when laying ceramic tiles.
The ultra thin Vysa-MatTM Classic heating mats rated 100W/m2 to 200W/m2 can easily be fitted directly onto your existing tiled floor without needing remove it. Vysa-MatTM Classic can be installed within the thickness of the tile adhesives and therefore adds no significant height to the floor level. Consequently, there should be no requirement to reduce door heights, raise skirting boards etc.
Vysa-MatTM Classic heating mats rated 100W/m2 are ideal for refurbishment projects where they can be installed onto an existing floor structure
Vysa-MatTM Classic heating mats rated 150W/m2 would be suitable as a primary heating source in well insulated dwellings with a large surface area
Vysa-MatTM Classic heating mats rated 200W/m2 would be suitable as a primary heating source in not so well insulated dwellings with a smaller surface area. They are ideal for conservatories. large hallways and lobbies too - anywhere that you need more heat
According to BS EN 60 335 / IEC 335 Vysa-MatTM Classic 100W/m2 can be used directly on top of timber sub-floors without Vysa-PronTM thermal insulation. Vysa-MatTM Classic heating mats rated 150W/m2 can be used on timber sub-floors but BS EN 60 335 / IEC 335 recommends that the power rating must be confined to 100W/m2 unless you install Vysa-Pron thermal insulation on top of the timber sub-floor.
Normally, Vysa-MatTM Classic heating mats rated 100W/m2 would be chosen to simply provide a warm floor so that you have the comfort of walking on a floor that doesn't feel 'cold'.
Naturally, Vysa-MatTMClassic is a twin conductor design with a single 3 metre long 'cold tail' connections lead (only one connection cable to the thermostat).
Vysa-MatTMClassic is supplied together with a 2 metre length of 10mm flexible conduit for the floor sensor (supplied with the thermostats). We include a (red) bung in one end to prevent adhesive from entering the conduit and sticking to the floor sensor.
For the technically minded, Teflon is non-toxic and has excellent mechanical strength, tear resistance and flexibility. It is fire retardant and completely free from any thermal aging effects. It is completely biocompatible and unaffected by fungus, bacteria or mould growth. It is resistant to all chemicals used in building technology and is unaffected by prolonged exposure to UV radiation, sunlight and moisture.
|
|
Loose Wire System
We design our systems using a 3mm, ultra-thin, dual-core heating element. The small cross-section of our element allows it to be installed in a matter of hours without raising floor levels.
There is no need to dig up the floor and no need to mix concrete. Simply fix our heating element to the subfloor, tile straight over and say goodbye to cold feet for good!
|
|
SIPCP Twin heating mat with 1-sided connection
For complete heating (floor storage heating, partial storage and direct heating)
Laying width 90 cm
Sepentine heating conductor mounted on synthetic supporting net
Cold lead length 4 metres, 1-sided connection
For use in dry, humid and wet rooms
With PVC protective jacket for exceptional heat stabilization
Specific linear load max. 25 W/m
|
|
|
Domocâble offers comfort d´une soft and uniform heat and d´un agreeably hot ground without cold zone and circulation to d´air. The temperature of surface of the ground does not exceed 28°C.
|
|
|
Honeywell Floor Heating systems consist of a Teflon insulated copper alloy resistance heating element sewn to a fiberglass mesh backing. The heating element is evenly spaced in 2” serpentine loops. It also delivers a faster, more even distribution of heat for improved homeowner comfort. The entire system is less than 1/8” thick allowing it to be easily installed under tile and stone without greatly affecting the floor height.
|
|
Honeywell Floor Heating systems consist of a Teflon insulated copper alloy resistance heating element sewn to a fiberglass mesh backing. The heating element is evenly spaced in 2” serpentine loops. It also delivers a faster, more even distribution of heat for improved homeowner comfort. The entire system is less than 1/8” thick allowing it to be easily installed under tile and stone without greatly affecting the floor height.
The fiberglass mesh backing helps to hold the heating element in place for easy, fault-free installation. It also allows the system to be covered directly by the thinset cement used to lay tile or natural stone flooring.
Full room heating systems generally consist of a single Honeywell heating “roll” of predetermined length. The system is placed in position using the easy-to-follow floor layout diagram provided with each kit, with a pre-attached lead that runs to a thermostat and/or junction box for power. No additional installation wiring is required.
|
|
Underfloor heating suitable for fitting around the perimeter of an un-carpeted room which requires high-output heating with a fast response time. Typical applications are garden rooms and galleries, entrance halls, and traditional greenhouses and conservatories.
The heating system uses convectors, set in a duct and covered with grilles and works efficiently off existing central heating without fans or additional pumps. Marston & Langinger offers a design-layout service, and supplies heating convectors, baffles (to improve air circulation), alloy grille-supports, trims, and grilles in various sizes, combinations and patterns. In glass buildings with electric ventilators, a Marston & Langinger automatic controller can be used to operate both the heating and ventilation to give a balanced temperature, whatever the weather outside.
|
|
'Direct Electric Underfloor Heating'
Connects at only one end for easy installation...
With its double shielding in aluminium foil and tinned copper braiding, the HPE Cable offers the highest level of electrical and mechanical protection. This permanent-output cable connects at only one end via a 2.5 m cold lead. It represents by far the best performance-to-cost ratio for this type of heating.
The heating element with metallic coating is surrounded by low-density polyethylene insulation with a 2.5 m cold lead and comes on plastic mesh mats either 0.50 or 0.90 m in width with the cable adhered at 0.17 m intervals and with hold-down fasteners.
Features
PRE Technical Requirements Document 06/96 - Technical Notice 14/02-713*02 ext.
Regulation: 1 pilot-wire programmable ambient thermostat per room.
|
|
|
The 2mm-thick Warmup Undertile Heater can be fitted directly under wooden, laminate or carpeted flooring, without the need for self-levelling compound
|
|
'Direct Electric Underfloor Heating'
Connects at only one end for easy installation...
With its double shielding in aluminium foil and tinned copper braiding, the HPE Cable offers the highest level of electrical and mechanical protection. This permanent-output cable connects at only one end via a 2.5 m cold lead. It represents by far the best performance-to-cost ratio for this type of heating.
The heating element with metallic coating is surrounded by low-density polyethylene insulation with a 2.5 m cold lead and comes on plastic mesh mats either 0.50 or 0.90 m in width with the cable adhered at 0.17 m intervals and with hold-down fasteners.
Features
PRE Technical Requirements Document 06/96 - Technical Notice 14/02-713*02 ext.
Regulation: 1 pilot-wire programmable ambient thermostat per room.
|
|
|
|