|
|
Glazing
Slim security/safety glazing cut-out with glazing frame in anodised aluminium, natural finish (EV 1).
Glazing bars opposite hinge side as standard, on hinged
side on request.
Optional extras
Rain canopy Aluminium suitable for painting,
slot-on type
Weather bar Only on single-leaf MZ door
Glazing Glazing size 230 mm x 1360 mm
7 mm single wired glass or 20 mm
insulating wired glass
Ventilation Plastic ventilation grille 455 x 90 mm
Aluminium ventilation grille 425 x 75 mm
(fitted in the bottom section)
Additional frame 3-sided, for screw fixing, 1.5 mm thick,
galvanised, wall thickness 110 - 450 mm
Block frame 3-sided, with EPDM seal
Light grey (based on RAL 7035)
Frame For finished floor
Lock Anti-panic lock for profile cylinder, left/right,
with lever/knob or lever/lever
Profile cylinder 31.5 + 31.5 mm with 3 keys
Lever handle set Round-lever handle set with short escutcheons
or roses: with lever handle on both sides,
as lever/knob or anti-panic sets,
in plastic, aluminium or stainless steel Bar handle Anti-panic bar handle
|
|
| Series 250, 400 and 550 Doors. Entrance doors and frames are built consistently to the highest industry standards ensuring years of dependable service. Job-tested, mechanically fastened and welded corners create a rugged structural corner assembly. All doors offer clean lines and are supplied with unique Astral push/pull hardware, locks and cylinders. These doors can easily accommodate a wide variety of custom hardware to meet specific job requirements. Doors are available in narrow, medium and wide stiles. |
|
Standard equipment
Construction Single-shell door leaf and panel frame,
made of flush-fitting extruded aluminium
profiles, 50 mm thick, wall thickness 2 mm,
bottom section height 150 mm
Corner joint Press-bonded connection with solid corner
angles, screw connectors at butt joints
Sealing Between frame and door leaf:
EPDM rebate seal
In the threshold area: EPDM flexible seal
with double lip and moulded gaskets
In the glazing rebate: EPDM flexible seals
Security/safety glass glazing bar
Threshold 2-piece threshold profile with seal
Threshold rail Threshold profile screws off
Infill Optional (same price):
Sandwich panel, 24 mm thick, consisting of:
plain metal sheets with thermally insulated
core
Insulating wired ornamental glass, light 24 mm
Surface Frame, door leaf and panel:
powder-coated traffic white
(based on RAL 9016) high-gloss
Lock Mortice lock with, profile cylinder and 3 keys
Lever handles Aluminium lever handle set, white
Hinges 2-piece aluminium hinges, 3-dimensionally
adjustable, firmly screwed into
reinforcement plates
Latching Double-leaf door:
2 espagnolette bolts in the rebate,
concealed in the fixed leaf,
latching towards top and bottom |
|
United States Aluminum fiberglass reinforced Polyester (FRP)
Flush Door offers trouble-free performance and long-lasting beauty
in the most demanding interior and exterior entrance applications.
Remarkably durable, they can look like new for years.
Our FRP Doors are the informed choice for schools, public buildings,
water and wastewater treatment facilities, and other applications
that quickly damage or even destroy lesser doors. They also
offer an economical, easy-to-clean alternative to stainless steel for
sanitary environments such as hospitals, laboratories and kitchens.
Whether for new construction or for retrofit applications, FRP Flush
Doors from United States Aluminum deliver the highest performance,
longest life, and greatest overall value. |
|
| The final product in the Lualdi catalogue is the Blues door; simple and compact, it brings together materials that are in tune with current interior design trends. The different finish options for the door leaf (transparent or opal safety glass; box construction in oak, horizontal veneer, or matt enamel in a series of colours) paired with a frame in anodised aluminium, create solutions with great formal rigidity. The doorjamb, constructed with the same material as the frame, is telescopic and adapts to walls of varying thickness. |
|
EXTRA
OPEN UP NEW SCENARIOS. System of doors with swing opening. Extra is a new concept in swing doors, with its high-tech design and features. The door, made entirely of glass in various finishes or entirely in anodised aluminium, bleached or weng%uFFFD-stained oak or lacquered white, is positioned outside the wall. The telescopic jambs are in anodised aluminium. The hinges are of reduced size. The handle assembly features an innovative design.
|
|
Theatre is a new, original system of doors. In Theatre, the structure of the door, crafted thanks to Lualdi's sophisticated ability in the use of wood, is entirely covered in leather. The final result is a warm and refined elegance, highlighted by smooth lines.
|
|
We've made creating a unique, signature door a smooth, simple process. It all begins with a few key selections you determine are best for your needs. Then, using the design, species, and dimensions that you specify, Simpson can create your masterpiece. Whether we construct your door with veneer and engineered core components or laminated lumber, we will incorporate both technology and beauty into your individual design.
Once you have a design, you can then select the species of wood that is the best match, whether a classic favorite or something more exotic. We work with dozens of wood species from around the world, including: fir, hemlock, pine, knotty pine, cherry, maple, walnut, oak, mahogany, knotty alder, poplar, birch and white birch.
Whatever the species used in Simpson Custom Doors, it must meet strict grading standards before being accepted. For instance, we use only color matched Cherry that is all heart with no sap. The beauty of cathedral grain patterns are retained for parts over 26" long and 4" wide. Veneered panels are slip matched to further enhance the consistent appearance. Maple is another good example, since we only use hard rock maple that is uniform in color.
|
|
Sometimes an exterior door needs additional protection from the demanding elements of Mother Nature. Developed for exterior doors that are subject to harsher environments, Performance Series® is a selection of heavy-duty door components that deliver maximum protection of your finely crafted Simpson door. We currently offer two Performance Series options, UltraBlock® and WaterBarrierTM Technologies. The combination of these two technologies creates a door suited for the toughest exposures. And this protection is delivered without sacrificing the charm and craftsmanship you've come to expect from a Simpson door. After all, a beautiful door is only worth having if you can protect it.
|
|
PROFILO - MEDA
The incomparable appeal of the natural warmth of wood and an especially unique and refined design are the hallmarks of the doors in the Profilo collection. Elegant and sober lines confer a "no-nonsense" touch to the ambience and are the excellent solution for interiors of modern design. While perfectly at home in traditional settings, these doors truly come into their own in spaces where refined simplicity of decor conveying an uncluttered sense of buoyancy is the hallmark. |
|
Glass, not only light and colour. A new idea to furnish with an evermore personalised style thanks to the vast choice of glass that Dierre doors can offer.
Simple solutions with satin or sanded effect, suggestive coloured versions or particular engraved surfaces, without forgetting varicoloured cathedral-style propositions. Dierre emphasize the pleasure in furnishing.
|
|
SAVINI 6
RAL 4009 blank version.
M80 cover mould.
Available: blank.
|
|
Optional extras
Door leaves Unequal door leaf widths possible
For infills see bottom left
Horizontal rail Additional rail, 43 mm wide,
positioned at any required height
Glazing Glazing size up to max. 1250 mm
(specify height from FFL)
Factory glazing:
with 4 mm clear acrylic single pane
with 18 mm clear acrylic double pane
with 16 mm acrylic double-moulded pane
Site glazing:
Max. pane thickness 20 mm
Glazing frames:
Aluminium glazing bars for single panes
Aluminium frame, can be painted,
for double panes
Connecting frame for fitting in the opening,
2 mm thick up to 3000 mm door height, from
3001 mm door height with 60 mm x 60 mm
tubular section
Frames For frame versions see page 14
Surface finish Door leaf and frame
galvanised and primed (powder-coated)
terra brown (based on RAL 8028)
Lock Anti-panic lock, prepared for profile cylinder
Profile cylinder 35.5 mm + 35.5 mm
Lever handles Aluminium lever/knob handle set,
prepared for profile cylinder,
anodised in natural finish (F1) |
|
MULTIPLA
• Pre-painted 8/10 electro-galvanised sheet metal body
• 25/10 frame with retaining ties
• Hinges with wear resistant bush
• Patent type lock
• Internal alveolar insulation
• Sliding door closer
• Fire resistant lock
• Anti-panic lock
Multipla can be made: with a single leaf, with a double leaf
• With fanlight and/or sidelight configuration
|
|
Steel doors for robust
everyday operation
Wherever robust, ready-to-fit doors are called for, Hörmann
D 45/D 55 steel doors prove the ideal choice. These doors are preferably used for external applications: in industrial and commercial facilities, in the public building sector as well
as in agriculture. They guarantee reliable operation, are tight-fitting as well as warp and weather-resistant. This is Hörmann
quality in steel.
Thermal and acoustic insulation
The sealing to three sides and the infill over the entire door leaf area make for good thermal and acoustic insulation, especially when used together with a stepped threshold or retractable bottom seal. |
|
TONELLI 2
Blank version in cherry stained alder with flat panel with polished brass inserts.
Available: blank with flat panel and polished brass inserts, glazed with flat panel and polished brass inserts.
|
|
DOORS LINEA RINASCIMENTO
Still of Renaissance origin, with the same type of carving and finish, the Linea Rinascimento also contains, in its rich and appreciated production, a door collection, always to be personalized and realized with handmade finish and precious decorations. They’re the perfect alternative to a real period door, that has become unobtainable, and contribute to the enrichment and decoration of important rooms.
|
|
Stile is the new collection of doors by Cormo, made in precomposed wood veneer with wengé and bleached oak finish. Their design is simple yet sophisticated with mini-malist lines and particular harmony in their proportions.
|
|
SAVINI 8 BLANK WITH THREE PANELS
Blank version in light Tanganyika with three panels and satin chrome profiles.
M80 cover mould
|
|
the frame and door leaf are external to the wall
A door that emerges from the wall, taking its distance from traditional schemes to offer, in an innovative design, new aesthetic emotions and simplified technical performance. The Outline door is a panel of great visual and tactile impact, detached from the wall for the same effect created by a volume in a space. Unlike the usual solutions of doors “aligned” with the wall surface, Outline stands out to make a strong decor contribution. Assembly of Outline is also easy; the door is directly installed on the wall.
|
|
| The design for Ala model is born out of the concept of a three-dimensional door whose presence in a room provides a sense of volume. The effect is created by the bevelled shape of the external side of the coverings, which gives the impression that the door protrudes from the wall, and creates an unusual play of shadows on the wall. The door is veneered with enamelled cherry or oak wood or matt enamel in a series of colours. On the version with stainless steel inlay, the veneer runs horizontally. The hinges are concealed. |
|
This series of doors, which align perfectly with the wall, was born out of a completely innovative concept in line with the new design aesthetic of linearity and essentiality. The dummy frame is in fact replaced by a thin doorjamb made of anodised aluminium, attached to the wall with clamps, provided with rubber gasket: a special treatment guarantees a perfect adhesion between the aluminium and the wall. The door has an external hinge, which allows for it to be opened towards the outside (with a push) or towards the inside (by pulling).
|
|
Simpson chalkboard panel doors are prefect for families on the go, whether used in the kitchen, pantry or a kid's room. Children can post artwork from school or create original works of art directly on the door itself. And mom and dad will like it as a place to post grocery and to-do lists or simply as a place to write reminders for other members of the family.
Door Name: Chalkboard Panel Door
Door Number: 1120
Door Series: Stain Grade
Door Type: Interior Panel
Door Species: Cherry
Panels: 1/4" Black Magnetic
Door Widths: 2'0", 2'4", 2'6", 2'8", 2'10", 3'0"
Door Heights: 6'8", 7'0", 8'0"
|
|
We recommend these elegant, light-looking yet extremely sturdy aluminium doors for distinguished interiors, for example, in offices and administrative buildings.
The variety of versions means that you determine the appearance. The door colours can be harmoniously matched to the interior design scheme. The large areas of glazing create a bright, friendly atmosphere. In terms of both equipment and quality, AZ aluminium doors meet the high standards required of high-grade internal doors in a modernday environment.
All Hörmann internal doors can be supplied on request with glazing.
If glazing is to be site-fitted, please note the following pane thicknesses:
• ZK and OIT doors (pane thickness 4-6 mm),
• AZ 40 doors (pane thickness 4-18 mm).
Circular glazing for ZK and OIT doors can only be fitted at the factory.
For further details please refer to the specifications. |
|
| It is a new version of doors with a peculiar frame in anodized aluminium, wood or laquered with a wide variety of glasses and panels. Thanks to its mechanisms it gives a great flexibility for " of door. |
|
A new style of frame; new finishings and above all a brand new system enable you to decide which way of opening only at the moment of assembling the door. Deed gives value and importance to the ordinary door. The result is like a picture hanged to the wall thanks to the wavy frame and to the finishings like golden and silver leaf.
with frame in the new finish imes with acid glass. The handle is integrated into the frame. er part, the door jamb smaller lath with the same finish "brill". |
|
| flowing clapper doors and in crystal, with and without chassis, with decorations, on measure, with accessories in steel |
|
With a strong structure and subtle decorative details, Lola’s beauty is enhanced by interesting play on light with glass panels. LOLA is an essential door in the version with chequerboard panels, subtly reminiscent of the Liberty style.
It is the ideal door for classic and traditional settings.
|
|
Linear, simple, solid and of rational design, PRETTY represents the perfect balance between quality and value.
Its personality is complemented by the DIEMME door jamb, acknowledged appreciated for its innovative and elegant design.
|
|
|
|
