Electric air heaters

20 companies | 52 products
Air heaters
  • What’s new?
    Submit
  • Power source
    Submit
  • Installation
    Submit
  • Other characteristics
    Submit

The type ATDA and ATDG fan-assisted unit heaters are designed for heating and ventilating industrial, workshop, retail and warehouse premises, garages, supermarkets...

LVDV is a fan-assisted unit heater designed for space heating in shop entrances, lobbies, doorways, warehouses, workshops, garages and similar premises. The...

{{productDetail[51800]}}

Portable or wall mounting aerotherme. Integrated thermostat....

Use in explosive atmospheres (zone 1 and 2 ATEX). Complies...

{{productDetail[497]}}

TROX VARYCONTROL® air heaters type WT, WL and EL have been developed to reheat air in ventilation systems.
Air Heater
Hot water for types TVZ, TVR, TVJ, TVT, RN and EN
Electric for types TVR and RN
Installation, heating output...

TROX VARYCONTROL® air heaters type WT, WL and EL have been developed to reheat air in ventilation systems.
Air Heater
Hot water for types TVZ, TVR, TVJ, TVT, RN and EN
Electric for types TVR and RN
Installation, heating output...

TROX VARYCONTROL® air heaters type WT, WL and EL have been developed to reheat air in ventilation systems.
Air Heater
Hot water for types TVZ, TVR, TVJ, TVT, RN and EN
Electric for types TVR and RN
Installation, heating output...

{{productDetail[62712]}}

Air heating unit with electric heater, heating capacity up to 30 kW and the air flow up to 4000 m3/h. Used for cost-efficient and energy-efficient air heating of various premises.
Application
Designed for air heating in the room with electric heater and air uniform distribution due to an integrated fan and louvre shutters. The air heating units enable quick air heating of large premises...

Duct electric heater with temperature controller or control unit.

Applications
Duct electric heater are designed for supply air heating in round duct ventilating system. The heaters are applied in heating, ventilation and air conditioning systems for various premises.

Design
The...

Applications
Duct electric heaters are designed for heating of intake air in rectangular ventilating system. The heaters are applied for air heating in ventilation and air conditioning systems in various premises.

Design
The casing and the terminal box are made of galvanized steel plate and the heating elements are...

{{productDetail[73610]}}

Elegant buildings - a modern industrial design and aesthetic elements of the finish make the LEO FL heater fit for heating interiors of public buildings such as car showrooms, sports facilities, churches, exhibition rooms, etc.
Modern design - the casing is made of anti-static ABS plastic; allowing the reduction of the overall weight of the device and making...

Elegant buildings - reduced size, heating power and a modern look make the LEO FS heater an indispensable solution in medium-size facilities for official purposes such as: restaurants, pubs, shops, showrooms, etc.

Modern...

Industrial buildings - high efficiency, light-weight structure and reliability are deciding factors when choosing the LEO FB for workshops, supermarkets, pavilions, large warehouse areas, sports facilities and buildings of worship.

Modern design - the modern design of the casing combines all the advantages of metal devices and those made of plastic....

The LEO INOX heater has been developed to meet a high level of humidity, which is why it can be used in facilities such as: car washes, industrial workshops, food industry...

Heater with explosion-proof fan it may be used in facilities with special security requirements such as woodworking shops, paint shops, welding shops, etc.
The heater can be installed inside buildings...

{{productDetail[145183]}}

Mobile warm air heater for tent heating.

The warm air heater VAM 15 MK II is a mobile 18-kW unit primarily developed to provide heating in temporary or transportable buildings or tents.

The VAM 15 operates...

Mobile warm air heater for tent heating.

The warm air heater VAM 40 MK II is a mobile 38-kW unit primarily developed to provide heating in temporary or...

{{productDetail[80586]}}

Electric air heater is for instance used for air massage in spa pools. The incoming air is heated and mixed with the water. The heater has a power output of 1.5 kW and is made of...

{{productDetail[10016]}}

The Janus unit heaters can be used to economically cool industrial, commercial and sporting facilities, transforming a traditional heating system using unit...

The ELECTRA 90 electric unit heaters with horizontal discharge are made in 7 sizes, with heat outputs from 6 to 36 kW. The electrical heat exchanger has two-stage sealed electrical resistance made of finned steel...

{{productDetail[51461]}}

Range :
Available in 5 sizes depending on the cooling/heating capacity (from 4 to 155 kW) and the flow (from 1700 to 11000 m3/h) to be supplied

Available with casing:

Epoxy Polyester Coating
STAINLESS STEEL
Available with coil:

HERESITE coating
STAINLESS STEEL Tubes
ATEX variant (certified by an independent organisation: LCIE) for High...

Range :
Five models available
Heating capacity: 5 to 120 kW (hot water) and 6 to 60 kW (electric heating)
Air flow rates: 900 to 14,000 m³/h
ES: Extra-quiet
S: Quiet
GV: Large spaces
TGV: Very large spaces
Operating range :
Débit...

{{productDetail[387]}}

Highly efficient heat exchanger made from aluminised steel
Modular burner configuration for safe operation...

2-in-1 Product - Vertical hot-air generator incl. hot-air recycling; i.e., lower investment and operating costs as no additional ceiling fans [destratification...

Modular burner configuration for safe operation and longevity
High-performance radial fan made from aluminium...

{{productDetail[73452]}}

RP electric fan-coils are equipments for heating premises in which
electricity is the source to be used.
These are equipments...

{{productDetail[50549]}}

Extra strength elements AISI 321 for high performance
Built-in...

{{productDetail[9979]}}

The TANNER MDA is a water-supplied suspended air heater which can expel air horizontally or vertically. The unit has a powerful axial fan which means it is suitable for many applications. MARK B.V. offers...

The TANNER MDC is a water-supplied suspended air heater which can expel air horizontally or vertically. The unit has a powerful centrifugal fan which means it is suitable for many applications. MARK offers a highly...

{{productDetail[67572]}}
{{productDetail[56767]}}

Compact performance unit designed...

Saving heating unit...

Heating unit designed for modern...

Heating units with low noise and JET...

{{productDetail[59710]}}
{{productDetail[307]}}

SPACE HEATER
Electric Jim heaterfir...

{{productDetail[646]}}
{{productDetail[329]}}

Compact fan heater for smaller premises.

Application
Cat is a range of compact and quiet fan heaters for stationary...

Efficient fan heater for medium size premises.

Application
Panther 6-15 is a range of very quiet and efficient fan...

{{productDetail[500]}}

The Washdown Series unit heaters are electric unit heaters constructed
for use in areas that require washing or hosing of equipment due to
dirty or dusty industrial environments in non-hazardous locations. The
totally enclosed water-tight construction made with corrosion-resistant
material make this series ideal for industrial heating applications. The
Washdown Series is constructed...

CONSTRUCTION:
Heavy gauge welded steel cabinet with powder coated finish and control
compartment with a hinged and latched access door, simplifying wiring
installation & maintenance.
HEATING ELEMENT:
Circular copper clad steel sheath element with continuously brazed steel fins formed to match the air delivery pattern of the fan blade.
OVERHEAT PROTECTION:
All...

CONSTRUCTION:
Heavy gauge steel cabinet with powder coated finish and control compartment
housing a master terminal board. The control compartment allows for access
through a hinged and latched door, simplifying wiring, installation, and
maintenance.
HEATING ELEMENT:
The heating element is a copper clad steel sheath element...

CASING: Fabricated of die formed, heavy
gauge steel and finished with two tone,
brown and beige, durable powder coated
paint. Supply air is drawn through the
rear heavy duty expanded steel inlet grill.
Heated air is discharged through front
adjustable louvers, which are spring loaded
for individual adjustment.
ELEMENT: Heavy-duty block fin
element design....

The electric cabinet unit heater is designed for mounting in any
position, fully recessed, semi-recessed or surface mounted. All
capacities, voltages, physical sizes, grille arrangements and options
shall be as specified on the plans. All units must be field convertible
to...

{{productDetail[10144]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With ArchiExpo you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation