|
|
The DRU Metro 80e can be installed into an existing or false chimneybreast. It has a frameless design with a full width, glowing fire bed, together with a unique, realistic LED flame picture with choice of twigs or pebbles.
Like all of the DRU Electric Collection, the Metro 80e is operated by remote control. The flame picture only requires 15 watts of electricity, less than an average light bulb! This makes it both practical and economical to use.
Comes with a remote control as standard.
Output (electrical heater: 1 kW - 2 kW
|
|
The Venteo-e slim line creates lifelike flames and only uses 15 Watt! That is less then an electric bulb, which is cheaper for you and better for the environment. That is a very nice fact in this time of environmental awareness.
Comes with a remote control and 2 kW heater.
Output (electrical heater): 1 kW - 2 kW
|
|
Oakham
537
-Chrome
-Black
-Brushed Steel
-Virtual Flame
-2kW
-Thermostat
-Real Coal
-Marbles
Height 590 mm
Width 635 mm
Depth 130 mm
|
|
|
Modern electric fire with the new revolutionary three dimensional Opti-myst fire. Flame effect created by illuminated water mist.
|
|
-High tech machined quality aluminium look
-Glass front moves back as heating starts and closes when switched off
-Concealed control panel and remote housing
-Featuring realistic flame animation flame effect
-Unique separately controllable fuel radiance
-Fuel and flame fade up on activation, down on deactivation
-Panoramic flame/log effect for maximum impact
-Multifunction remote control including double dimmer for flames and logs
-Internal manual override control panel
-Flame without heat setting
-Hidden heater technology, 1000W/2000W
-Atomic also available with semi spacer - speckled black finish, as shown in photo or as a hang on the wall fire, with outer casing if no inset can be made. Projection from the wall: 230mm.
|
|
-Unique switchable fuel bed/log flicker
-Panoramic flame effect for maximum impact
-Multifunction remote control including double dimmer for flames and fuel bed
-Front glass panel
-Internal manual override control panel
-Flame without heat setting
-Hidden heater technology, 1000W/2000W
-Alto also available in black/black
-Hang on the wall option is available with outer casing if not inset can be made. Projection from the wall: 230mm.
|
|
Modern free-standing, 3-sided electric fire with the new revolutionary three dimensional Opti-myst fire. Flame effect
created by illuminated water mist.
|
|
The new model 512 Pilton is a fire with a Wow factor! Wall-hanging fire with remote control. Available in dark or light grey.
Grey
Virtual Flame
Thermostat
Marbles
Remote
Height - 600 mm
Width - 900 mm
Depth - 165 mm
|
|
The elegant portrait-style Allexton fire forms an attractive feature and centre piece to any room.
Available in black, narrow black or chrome.
Black
Virtual Flame
Remote
Height - 826 mm
Width - 610 mm
Depth - 125 mm
|
|
This impressive wall-mounted fire will enhance the most contemporary of homes. The solid glass front incorporates the Burley Sensa-Switch mechanism. Control your fire's settings through the touch-sensitive glass.
Sensa-Switch
Virtual Flame
Thermostat
Real Coal
Marbles
Remote
Height - 600 mm
Width - 940 mm
Depth - 165 mm
Touch sensitive screen, Remote control, Ioniser, Glass
|
|
The ultra contemporary Uppingham is an extra large wall-hanging electric fire. Supplied in black with optional stainless steel horizontal panels included.
Brushed Steel
Virtual Flame
Remote
Height - 600 mm
Width - 1110 mm
Depth - 165 mm
|
|
THAMES
797
The Thames surround is available in cast stone or slate. It can be wall mounted or simply placed on the floor, vertically or horizontally. This surround is designed for use with the Oakham 537 fire
Height (a) 945 mm
Width (b) 1050 mm
Depth (c) 130 mm
Height (d) 723 mm
Width (e) 612 mm
Depth (f) 415 mm
Height (g) 565 mm
Width (h) 440 mm
|
|
A slim, picture frame design with the Sensa-Switch touch control system. Available in brown, black or chrome.
Sensa-Switch
Virtual Flame
Remote
Height - 630 mm
Width - 575 mm
Depth - 140 mm
Brown
|
|
- Wall mounted or hole in the wall fire
- Choice of three finishes, graphite, bronze or stone effect, with decorative silver frame
-Includes "spacer" for wall mounting
-Shallow inset dimensions
-Multifunction remote control including dimmer
-Alternative manual control panel on fire
-Flame without heat setting
-Hidden heater 1000W/2000W
-Choice of two widths - 1000 or 800mm
-Choice of pebbles or coal fuel effect
-Wall mounted version: back box/spacer in place, wall 'footprint' (h) 570 mm x (w) 700 mm. Projection from wall 195 mm.
Please note, inset dimensions (cut hole size) when back box/spacer is removed
|
|
-Easy installation, floor standing so no inset required
-Multifunction remote control including double dimmer for flames and fuel bed
-Unique switchable fuel effect flicker
-Internal manual override and remote storage behind ashpan cover
-Flame without heat setting
-Hidden heat technology 1000W/2000W
-Available with either coal or log fuel effects
-Surround: Oak finish
-Hearth Black
(Tennyson cast iron fire)
-Cast back and fire available separately for addition of over mantle and hearth to suit.
-Inset dimensions (cut hole size) (h) 800mm (plus hearth) x (w) 500mm x (d) 165mm. Back panel of casting is 5mm thick.
|
|
-Easy installation, surface mounted or shallow inset dimensions
-Gloss white finish front panel: neutral fire emphasizes flame effect colours
-Easy change filters for 6 different colour effects:
Blue, Orange, Yellow, Red, Green, Lilac plus frost white fuel bed under natural white pebbles
-Flame without heat setting
-Ultra low energy LEDs: 14p/month for flame effect, up to 10 years bulb life (based on 6 hours use per day. 10p/kWh)
-Hidden heater, 1000W/2000W
-Alternative manual control panel on fire
-Includes 'spacer' for wall mounting
-Choice of fuel effects, pebbles as standard, driftwood as a cost option
|
|
-Multifunction remote control including dimmer
-Manual override control panel
-Hidden heater technology 750W/1500W
-Flame without heat setting
-Ease of access for bulb change
-Glass screen, and aluminium extuded trim (choice of colours)
-Curved flame effect
-Choice of fuel effects, either pebbles as standard, or driftwood as a cost option
|
|
-Easy installation, floor standing so no inset required
-Multifunction remote control including dimmer
-1000W/2000W heat selection
-Standard with silver Neptune fire but can be specified with other Flamerite inset fires
-Flame without heat setting
-Choice of fuel effects, either pebbles as standard, or driftwood as a cost option
-Simple lamp change, no tools needed
-Surround colour: Portland
|
|
-Ultra low energy LEDs: 14p/month for flame effect, up to 10 years bulb life (based on 6 hours use per day. 10p/kWh)
-Easy installation, surface mounted
-Can be positioned below TV (minimum 600mm from floor)
-Centrifugal fans give a choice of 750W/1500W
-Flame without heat setting
-Multifunction remote control including double dimmers for main lighting and side lights
-Coloured filters for both fuel bed and side lights add extra variation
-Choice of fuel effects, pebbles and coal supplied as standard, driftwood as a cost option.
|
|
-Easy installation, wall mounted so no inset required
-Minimal 120mm projection from wall
-Flame without heat setting
-Hidden heater, 750W or 1500W exit from under fire so can be positioned under TV (minimum 600mm from floor)
-High gloss dark silver front or satin painted stone effect or charcoal
-Fuel effect, natural looking pebbles with twigs behind 'child safe' glass screen
-Wall footprint (h) 475mm (w) 945mm
|
|
-Easy installation, surface mounted
-Can be positioned below TV (minimum 600mm from floor)
-Curved broze mirror tinted glass front panel
-750/1500W fan heater hidden below fire directs heat away from fire for optimum heat effect
-Flame without heat setting
-Multifucntion remote control including dimmer housed in front panel
-Alternative manual control panel on fire
-Choice of fuel effects, pebbles and coal supplied as standard, driftwood as a cost option
|
|
-Ultra low energy LEDs: 14p/month for flame effect, up to 10 years bulb life (based on 6 hours use per day. 10p/kWh)
-Easy installation, surface mounted
-Can be positioned below TV (minimum 600mm from floor)
-Flat glass screen with 'frame within a frame'
-Centrifugal fans give a choice of 750W/1500W
-Flame without heat setting
-Multifunction remote control including double dimmers for main lighting and side lights
-Coloured filters for both fuel bed and side lights add extra variation
-Choice of fuel effects, pebbles and coal supplied as standard, driftwood as a cost option.
|
|
Rural English electric fires for a rather classic taste.
Kal-fire BLT 999-A-1
Electric fire with heating
Built-in depth: 21,5 cm
Control: Manual
Tension: 220V - 240V AC
Frequency 50 - 60 Hz
Output: 120W flame effect; 1850W heating
|
|
Output 1-2 Kw;
Remote control;
Wall mounted version;
|
|
Easy installation, floor standing so no inset required.
Switchable feature side lights.
Acrylic shelves.
Multifuncion remote control including dimmer.
Flame withput heat setting.
1000W/2000W heat selection.
Choice of oak or mahogany effect finishes.
Brass frame and fret.
Choice of oak or mahogany effect finishes.
Brass frame and fret.
Choice of coal or log fuel effect.
|
|
Easy installation wall mountable, or floor standing suite son on inset required.
Panoramic flame effect.
Pebbles fuel bed.
Multifunction remote control including dimmer.
Internal manual override control panel
Flame without heat setting.
1000/2000W hidden heater.
Driftwood available as a cost option.
|
|
Unique switchable fuel bed/log flicker.
Panoramic flame effect for maximum impact.
Multifunction remote control including double dimmer for flames and fuel bad.
Internal manual override control panel.
Flame without heat setting.
Hidden heater 1000W/2000W.
Omni argento has silver frame and central glass panel.
Omni glass has black glass front with open central panel.
Inset dimensions = cut hole size.
Both Omni fires are available with outer casing to hang on the wall surface or with semi spacer to reduce inset depth.
|
|
| ... products without information |
| |
|
|
