Square body with raised edges that consist of an aluminium housing and a polycarbonate diffuser. Viewing distance according to EN 1838 < 46 m.
Consists of a fluorescent tube that is switched on if the mains power fails, in the case of series Orto non maintened, it is also possible to have the Orto combined wich contains two fluorescent lamps; an emergency light that only switches on if the network power supply fails, and another that acts as a normal light that can be switched on and off at will while voltage is supplied, and in the case of the Orto combined TCA incorpored an internal microprocessor checks the status of the device and periodically performs functionality and autonomy tests and reports the status.
Rectangular body with raised edges that consist of an aluminium housing and a polycarbonate diffuser. With a mounting system for connection to a rail. Consists of a fluorescent tube that is switched on if the mains power fails
Circular body with rounded edges. Consists of a decorative housing made of PC/ASA and a polycarbonate diffuser. Contains two fluorescent lamps; an emergency light that only switches on if the network power supply fails, and another that acts as a normal light that can be switched on and off at will while voltage is supplied.
Rectangular body whose visible side is a slanted surface with rounded edges. Consists of a decorative housing made of PC/ASA and a polycarbonate diffuser. Consists of a fluorescent lamp that switches on if the network power supply fails. An internal microprocessor checks the status of the device and periodically performs tests of functionality and autonomy and informs of the status by means of LED pilots. The tests can be triggered manually by means of an ON Remote Control order via the network.
Square body whose front parts form a slightly curved plate which can be adjusted either horizontally or vertically. Consists of a decorative housing made of PC/ASA and a polycarbonate diffuser. Contains two fluorescent lamps; an emergency light that only switches on if the network power supply fails, and another that acts as a normal light that can be switched on and off at will while voltage is supplied.
Decorative block consisting of a large box made of ABS, with four directional spotlights on the top with rectangular PAR 36 pressed glass lamps, joined to the housing with chrome signs. Consists of 2 or 4 PL fluorescent lamps that switch on if the network power supply fails. An internal microprocessor checks the status of the device and periodically performs tests of functionality and autonomy and informs of the status. If the luminaire connects to a TMA module, data on its status is sent directly to a control computer via this module where the status of the entire emergency luminaire installation can be monitored. The connection system is direct and has a front panel with two optical devices that indicate the status of the light.
Aluminium and borosilicate glass housings made in accordance with European directives 2004/108/CE and 94/9/CE governing electromagnetic and explosive atmosphere compatibility. Classification: II2G EEX d IIC T6 - II2D IP 67 T85ºC. Contains two fluorescent lamps; an emergency light that only switches on if the network power supply fails, and another that acts as a normal light that can be switched on and off at will while voltage is supplied.