|
|
Completely reversible, realized in galvanized steel sheet Sendzimir. Clapper in sheet pressopiegato to vertical ribbings and reinforced thickness 5/10 cross-sectionally from three profiles to Omega. It reinforces inner for the support of the hinges. Equipped with aeration slits up and low. Commant reversible lock with scrocco from key to sending. On every anta two endowed hinges in hinge steel are mounted antisfilamento. Perimetrale chassis outlined thickness 12/10 in to `endowed Z' of six zanche of anchorage. Removable inferior threshold. Supplied with handles and plates realized in nylon opaque black color and cylinder yale type with three keys. Paint job to epoxy powders in inks RAL.
|
|
FIRE RESISTANT RATED 120 MIN DOOR
Door assembled ready for the installation, not reversible, supplied to order of left SX or right DX hand
composed of:Door leaf made of double galvanized steel-sheet thickness 0.8 mm each with projection to overlap the frame of 25 mm on the 2 vertical sides and on top side, high density core of mineral wool layers alternated to special fire resisting compound, total thickness of leaf 60 mmAngular frame on 3 sides made of galvanized steel-sheet profile 1.5 mm thick, with clamps to bend open for the installation by mortar and with holes for the eventual installation with expansion screws. Lower jambs-distancer to remove after the installation
Lock with cyli nder hole
Safety bolts in leaf edge on opposite side of lock and strike boxes of poliammide inserted in the frame.
|
|
|
An avant-garde creation model that alternates vertical and hortizontal grooves. Inspired by the minimalist lines of new tendency buildings, the door is highly appreciated by designers.
|
|
An avant-garde creation model that alternates vertical and hortizontal grooves.
Inspired by the minimalist lines of new tendency buildings, the door is highly appreciated by designers.
|
|
This is our unique stainless steel door design. It can include either panels or windows that run down either side of the door. Insulating material is integrated into this design.
Please note that the dimensions for INOX are different to our wooden doors:Thickness of panel: 80 mm.Maximum width of panels: 600mm.
INOX comes in:
pre-painted steel in several RAL (European Colour Standard) colours
pre-painted satin-finished stainless steel
ColourTex® stainless steel can be combined with the substrate finishes of mirror or satin polishes. The colours produced under the ColourTex® process are black, blue, bronze, champagne, charcoal, gold, green and red
on request we can source copper, brass and aluminium.
|
|
It is the calling card of each house: the entrance door does not protect only from the bad weather and the undesirable people, it also gives to each house its individual key.
Aluminum is the ideal material to build the entrance doors. It is light, solid and of long life, resistant to the bad weather and corrosion. Thanks to different the types of surfaces it offers interesting possibilities of creation of traditional whole of entry or tendencies.
The entrance doors aluminum FINSTRAL offer balance between the advantages of the material and the experiment that FINSTRAL acquired in the field of the construction of windows and doors. A luminous design and a technique forged with the passing of years succeed in answering the highest requirements esthetics, functional calculuses, of stability and security.
Do not hesitate to consult your dispenser FINSTRAL to help you in the choice of your door.
|
|
The flush-fitting doors in the 4500 and 4500TH (thermal break) flat series were designed more specifically with offices, administrations, industrial buildings and apartment blocks in mind. The finish is luxurious and the design sleek, making it particularly easy to add the various fittings. As the box frame and door are aligned, it is easy to fit locks quickly and to include various other elements such as burglar-proof aluminium lift-off hinges, a retainer with ball bearings for heavy doors, an aluminium or golden lever
handle, fin or strap handle, tube handle, emergency handle, door-check, electric opening system with sensitive handle, door code, panic-lock, etc.
|
|
|
|
|
|
The SKYDAS PREMIUM is a very high quality door set whose structure features extra rigidity and resistance. Following the tests carried out in the most famous IFT ROSENHEIM (Germany) testing laboratory, the SKYDAS PREMIUM door was certified to a high level - the 4th burglar security class WK4 (according to the ENV 1627). The doors can be bulletproof.
Structural features of resistance:
- The lock is protected by 2 plates of drilling-resistant manganese.
- The body of the main lock is installed in a protective steel box.
- High-security hinges.
- On the hinge side, there are 8 locking pins of Ø 16 mm.
- On the lock side, there are six locking points and an additional 2 pairs directed upwards and downwards.
- The door panel consists of a combined structure: grading, sheet and again grading.
- Double thermal insulation of the sheet: 3 cm layer of high density stone wool on both sides of the sheet.
- The entire ultra strong structure of the door is covered by finish boards whose colour and design can be customised.
- The lock pins are protected against damage by a sheet and 15 mm flexed profile of the door panel.
- The casing is fastened to the door opening by 17 shafts protected with 24 mm steel liners.
Product specification:
Rating of sound insulation - 45 dB Rw (C; Ctr)
Rating of thermal transmittance - 1,3 W/(m²*K)
Resistance to repeated opening and closing - 200 000 cycle
Identification of resistance to wind load - Class C3
Measurements of air permeability - Class 3
Identification of water tightness - Class 1A
Identification of mechanical strenght and rigidity - Class 4
Identification of fire resistance - EI30/EI45
|
|
|
|
|
|
The SKYDAS STANDART 1LSF is the basic and simplest model of the SKYDAS doors. It is a reinforced door with excellent noise and thermal insulation. A security doors SKYDAS STANDART 1LSF can be customized, and is also available as a single or double, and fireproof (EI 30/ EI 45). After selecting a finish with UMIDAX-HLS board and a galvanised sheet structure, a door can be perfectly used as an external entrance door.
Product description:
- Door frame - 2 mm steel bended rectangular profile.
- Door leaf - specially bended steel construction.
- Hinge with supporting beds, covered with chrome-plated finishing caps - 2 items.
- Cut protective roll pins for door hinges (Ø16 mm) - 2 items.
- Insulation seals - 2 items.
- Eye hole.
- Outside and inside door finishing - optional.
- Outside and inside architraves - optional.
- Locks - optional.
Product specification:
Rating of sound insulation - 41 dB Rw (C; Ctr)
Rating of thermal transmittance - 1,3 W/(m²*K)
Resistance to repeated opening and closing - 200 000 cycle
Identification of resistance to wind load - Class C5
Measurements of air permeability - Class 4
Identification of water tightness - Class 6A
Identification of mechanical strenght and rigidity - Class 4
Identification of fire resistance - EI30/EI45
|
|
|
Sepalumic offers ranges of doors that are perfectly suited to the different contexts of individual houses, apartment blocks, offices and shops. The frame of any Sepalumic door from any range can be clad with decorative glass panels and cross bars or with decorative panels manufactured in a host of colours on thermal break ranges (lacquered white or bronze, all shades on the RAL colour chart, anodised semi-gloss silver, gold or bonze, plus 10 wood-look shades; two-tone is also possible).
|
|
This series of models takes as a starting point the traditional forms with a point of nostalgia.
Panels with milling inserted and worked in a appopriée way underline the artisanal completion of high quality and the particular effect of the models.
Materials of high quality, rational and modern systems of manufacture aussurent a very good quality-price ratio, even in the version of security.
|
|
|
|
|
|
The SKYDAS STANDART 3 is a door designed to protect against burglary by the use of heavy duty burglary tools. At IFT ROSENHEIM (Germany), it was certified as the 3rd burglar resistance class (according to the ENV 1627 standard). These doors are recommended both for apartments and houses that face an increased risk of burglary. This is a good protection not only against burglary, but also against noise and cold. Doors may be coated with various decorative panels (MDF, UMIDAX, veneer, natural wood, or laminated wood particle board).
Product description:
- Door frame - 2 mm steel bended L-form profile.
- Door leaf - special fire-protective steel construction.
- Hinge with supporting beds, covered with chrome-plated finishing caps -2 items.
- Cut protective roll pins for door hinges (Ø16 mm ) - 2 items.
- Insulation seals - 2 items.
- Additional fire protective insulation seal.
- Outside and inside door finishing - MDF board, laminated with PVC.
- Outside architrates - MDF board,laminated with PVC.
- Locks - optional.
Product specification:
Rating of sound insulation - 43 dB Rw (C; Ctr)
Rating of thermal transmittance - 1,3 W/(m²*K)
Resistance to repeated opening and closing - 200 000 cycle
Identification of resistance to wind load - Class C5
Measurements of air permeability - Class 4
Identification of water tightness - Class 6A
Identification of mechanical strenght and rigidity - Class 4
Identification of fire resistance - El 45
Identification of burglar resistance - Class 3
|
|
|
|
|
|
The SKYDAS 2000 is perfectly suited for private houses, cottages or apartments. Their finish features a high quality impregnated UMIDAX-HLS board which remains resistant to humidity even after mechanical damage, and the high quality paint does not discolour after many years. The door casing and the steel structure of the panel edges are also covered with this board. It is a combination of steel and wood where steel insures strength, and wood - non-permeability to cold.
In addition, the SKYDAS 2000 has very high characteristics of noise and heat insulation.
The SKYDAS 2000 as a standard is available as a single or double.
Product description:
- Door frame - 2 mm steel bended rectangular profile.
- Door leaf - specially bended steel construction.
- Hinge with supporting beds, covered with chrome-plated finishing caps - 3 items.
- Cut protective roll pins for door hinges (Ø16 mm) - 2 items.
- Insulation seals - 2 items.
- Eye hole.
- Outside and inside door finishing - painted UMIDAX-HLS
- Outside architraves - painted UMIDAX-HLS.
- Inside L - shape architraves - painted UMIDAX-HLS .
- Locks - optional.
- Stainless steel threshold.
- Assa plate into door frame
- Additional lengthened rings into door frame.
Product specification:
Rating of sound insulation - 42 dB Rw (C; Ctr)
Rating of thermal transmittance - 1,2 W/(m²*K)
Resistance to repeated opening and closing - 100 000 cycle
Identification of resistance to wind load - Class C5
Measurements of air permeability - Class 3
Identification of water tightness - Class 6A
Identification of mechanical strength and rigidity - Class 4
|
|
Entry door with inspired from 19th century France.
Full mortise and tenon joinery, pegged and wedged, bolection moldings formed in the mass of the stiles and rails, hand carvings of olive branch, wheat sheaf and vines
(other motifs available upon request)
Wood species: French oak or French walnut
Dimensions: 2,15/2,25m x 0,90 to 1,00m
(custom dimensions available upon request)
Available with sidelite(s), double leaf, with transom...........
|
|
Entry door Louis XV as fabricated in Provence in the early 1700's by the great master craftsmen of the époque.
Full mortise and tenon joinery, pegged and wedged, bolection moldings formed in the mass of the stiles and rails
Wood species: French oak or French walnut
Dimensions: 2,15/2,25m x 0,90 to 1,00m
(custom dimensions available upon request)
Available with sidelite(s), double leaf, with transom...........
|
|
Custom fabrication by Ebénisterie Bertoli (special order)
Entry door or Interior door with motifs single or double face.
Mortise and tenon joinery.
Three ply laminated panel to prevent distortions.
Wood species: French oak
Inlaid motif in solid French walnut
(other wood species and materials available)
Finish: brushed oak, natural oil finish.
Dimensions: 2,15/2,25m x 0,90 to 1,00m / 2,04m x 0,63/0,730,83m (custom dimensions available upon request)
|
|
This materpiece was created in 2003......
We reproduced an exact copie of an antique 18th century "porte cochère" from the convent "Jeunes Filles rèpudièes d'Avignon" originally crafted in 1710 by the most skilled joiners and wood carvers of that era.
This very impressive example of joinery was fabricated according to the trade practices of past:
Full mortise and tenon joinery, pegged and wedged, bolection moldings formed in the mass of the stiles and rails, hand carvings.
Wood species: French walnut
Dimensions: 3,54m x 2,00m
The original door can be found in the French city of Avignon, rue Armand Pontmartin.
|
|
|
Harmonic combination of geometric shapes that compose a design. Particularly adapt in modern contexts, suitable for window insertions.
|
|
Armored Entrance Door was ideated for the security and protection of houses, offices, shops, etc. Is certified Cl.4 Standard UNI ENV 1627/30:2000. The only weatherproof outdoor security door. Indeed, with its aluminium structure and stainless steel armour plating. Designed to meet the growing demand for security and reliability, as well as an eye to elegance and attention to detail, it is made to measure in range of wood, gothic, Ral and matt Ral colours and effects.
Technical Information:
Extruded aluminium profiles: Alloy 6060
Armour plating:frame/leaf with 4 mm thick AISI 304 stainless steel plate. Panel insulated with manganese steel plate 20/10
Accessories: 20/10 thick galvanised counterframe, burglar-proof aluminium hinges, reinforced aluminium corner cleats, stainless steel strikes, doble-bit key locks, lower and higher deviators, cylinder with Defender, aluminium draught excluder, aluminium burglar-proof brackets, seals in EPDM.
|
|
Royal S 65AK: The first choice for renovation work
Are you planning to renovate your home? Or would you like to revamp your period property? Then Schüco can offer you Royal S 65AK, a door system which is ideally suited to the special requirements of such a project.
|
|
Flush door
The VELFAC 600 flush door is ideal for any application which demands a durable, yet low maintenance, medium-use external door - as a side or rear entrance to a commercial facility or as a front door to a house. The flush door is available as either inward or outward opening, double or single leafed, and can be supplied in a variety of designs using different grooves and glazing shapes.
|
|
This 63 mm module door is robust, elegant and secure. It is adapted to intensive use, ideal for public buildings.
Characteristics
Titane door has been tested to 1 million cycles.
Large dimensions : H 2.50 m x W 1.30 and 140 kg per vent
Aesthetics and easy to operate thanks to specific handles: pull handle, vertical push bar
Thin aluminium view
Finger protection system: ideal for schools, public buildings, etc.
Inaccessible articulations (patented system)
Thin outer glazing gasket fully tamper-proof
Clipped and screwed outer glazing bead
Electromagnetic lock, etc.
Titane door is ideal for entrance of residential buildings, public buildings, schools, hospitals. It offers a solution with flat threshold enabling access to people with reduced mobility.
|
|
Main entrance door
The aluminium main entrance door is designed for installation as the main entrance to a commercial or public building.
|
|
|
Entrance Systems by YKK AP offer an abundance of options to the design professional. VersaJamb®, our unique reinforced tubular door frame, allows for sidelight glazing without the use of shear clips and/or exposed fasteners. YKK AP entrances are engineered to meet all job conditions from moderate to high traffic use. Door corners are mechanically joined and welded to withstand the most demanding conditions. Entrances accommodate most hardware and may be easily adapted for custom requirements. Our wide variety of anodized and painted finishes provide an array of color options.
|
|
Glazed door with fixed sidelight
Det faste sideparti anvendes, hvor der ønskes ekstra lysindfald i forbindelse med døre. Det kan bruges til 1-fløjede døre og sidder altid i dørens åbningsside. Alternativer til det faste sideparti er at vælge et sideparti i VELFAC 200 eller VELFAC 400, så det matcher vinduerne.
|
|
FAHRENHEIT 30 is a security doors fit to resist fire exposure for over 30 minutes
• Double zinc plated steel sheet
• Inside insulated by fire-retardant material
• Fire-retardant seal assuring resistance to the
flame
TESIO triple security lock
|
|
Heritage Series are the wood windows and doors that started it all for Kolbe & Kolbe. Heritage Series products were created with the craftsmanship of experienced woodworkers. And, as technology advanced in the industry, these products kept pace while staying true to the original artistry.
- 1-3/4" thick door sash
- 5-1/2" wide stiles, 4-1/2" wide top rails, 7-1/2" wide cross rails, and 7-9/16" wide bottom rails
- Sidelites have 2-5/8" stiles and matching rails to align with door panels
- Joints between stiles & rails are fastened with splined hardwood dowels and high-grade, exterior-rated waterproof glue
- Ovolo sticking & 1-1/4" thick raised panels (standard)
Options:
- Mission sticking & 1-1/4" flat panels
- Glass with Performance Divided Lites
- Beaded panels
- Mantel for additional detail
- Extension jambs
- Galvanized steel installation clips
|
|
|
|
|
|
Each hardwood door by Marston & Langinger is bespoke, individually made to measure. But all our hardwood doors share a combination of hand-built authentic period features, durability and security.
Whatever the style of your home - Georgian, Victorian, Edwardian or Modern - Marston & Langinger will supply exterior and interior doors compatible with the existing architecture. Whether you want delicate glazing bars or a bulwark against the outside world Marston & Langinger can provide an attractive sturdy period door in the right style.
Marston & Langinger traditional period doors come with a range of options and accessories.
Decorative, secure door frames and linings.
Glazed doors are pre-fitted with single or double glazing.
Door hardware ranging from multi-point locking security handles to traditional brass box-locks.
Quality hinges including 180-degree opening types, and classic knob handles.
And to perfectly finish the door Marstons Premium Paint.
Oxford hardwood period door. Available as an interior or exterior door, single or double glazed. From £909 or $1,975.
|
|
This front door system from Schüco is the most frequently used model. And there are several reasons for this...
As with all Schüco products, there is no need to compromise on design. The narrow face widths with flush-fitted vent geometry and silver-grey gaskets can help make your front door an elegant feature.
The softform design also meets the highest requirements in terms of a high-quality, harmonious look. The concealed drainage units contribute to the overall look by the very fact that they are concealed.
|
|
|
The S706 70mm System offers a full range of door options, which exactly match the Window System. The range is suitable for use in New Build and Refurbishment projects making it a firm favourite for both the Trade and Specifier markets.
|
|
|
|
