|
|
Completely reversible, realized in galvanized steel sheet Sendzimir. Clapper in sheet pressopiegato to vertical ribbings and reinforced thickness 5/10 cross-sectionally from three profiles to Omega. It reinforces inner for the support of the hinges. Equipped with aeration slits up and low. Commant reversible lock with scrocco from key to sending. On every anta two endowed hinges in hinge steel are mounted antisfilamento. Perimetrale chassis outlined thickness 12/10 in to `endowed Z' of six zanche of anchorage. Removable inferior threshold. Supplied with handles and plates realized in nylon opaque black color and cylinder yale type with three keys. Paint job to epoxy powders in inks RAL.
|
|
FIRE RESISTANT RATED 120 MIN DOOR
Door assembled ready for the installation, not reversible, supplied to order of left SX or right DX hand
composed of:Door leaf made of double galvanized steel-sheet thickness 0.8 mm each with projection to overlap the frame of 25 mm on the 2 vertical sides and on top side, high density core of mineral wool layers alternated to special fire resisting compound, total thickness of leaf 60 mmAngular frame on 3 sides made of galvanized steel-sheet profile 1.5 mm thick, with clamps to bend open for the installation by mortar and with holes for the eventual installation with expansion screws. Lower jambs-distancer to remove after the installation
Lock with cyli nder hole
Safety bolts in leaf edge on opposite side of lock and strike boxes of poliammide inserted in the frame.
|
|
|
|
|
|
The SKYDAS STANDART 1LSF is the basic and simplest model of the SKYDAS doors. It is a reinforced door with excellent noise and thermal insulation. A security doors SKYDAS STANDART 1LSF can be customized, and is also available as a single or double, and fireproof (EI 30/ EI 45). After selecting a finish with UMIDAX-HLS board and a galvanised sheet structure, a door can be perfectly used as an external entrance door.
Product description:
- Door frame - 2 mm steel bended rectangular profile.
- Door leaf - specially bended steel construction.
- Hinge with supporting beds, covered with chrome-plated finishing caps - 2 items.
- Cut protective roll pins for door hinges (Ø16 mm) - 2 items.
- Insulation seals - 2 items.
- Eye hole.
- Outside and inside door finishing - optional.
- Outside and inside architraves - optional.
- Locks - optional.
Product specification:
Rating of sound insulation - 41 dB Rw (C; Ctr)
Rating of thermal transmittance - 1,3 W/(m²*K)
Resistance to repeated opening and closing - 200 000 cycle
Identification of resistance to wind load - Class C5
Measurements of air permeability - Class 4
Identification of water tightness - Class 6A
Identification of mechanical strenght and rigidity - Class 4
Identification of fire resistance - EI30/EI45
|
|
FAHRENHEIT 30 is a security doors fit to resist fire exposure for over 30 minutes
• Double zinc plated steel sheet
• Inside insulated by fire-retardant material
• Fire-retardant seal assuring resistance to the
flame
TESIO triple security lock
|
|
The Special-Lite® SL-22 Fire-Rated AMP-Clad Door is the perfect complement to our SL-19 AMP entrance doors for interior or exterior applications that require a fire-rated door.
Tested in accordance with UBC 7-2, NFPA 252, and UL 10C requirements, the SL-22 has passed the 1-1/2 hour positive pressure test, hose stream test, and 250 °F (121 °C) temperature rise tests to achieve Warnock Hersey listing for fire-rating applications in the United States. The SL-22 is available with 30, 45, 60 or 90-minute fire-ratings.
|
|
| ... products without information |
| |
FIRE RESISTANCE
The software for the thermal analysis and the verification of resistance to the fire concurs to carry out the thermal analysis and the verification of resistance to the fire in the respect more prescrittivi codes. The thermal analysis happens to ended elements of composed sections from any material, under the action of the fire. To they of the thermal analysis goes, for sections in c.a and c.a.p., she is proceeded to the verification of the carrying ability.
|
|
Program to the ended elements dedicated to the analysis of the behavior to the fire of composed sections from materials any.
Verification of sections in reinforced concrete and precompresso reinforced concrete in conditions of thermal stress
|
|
| ... products without information |
| |
Aluminium frame partition: uprights, transoms and lower U-tracks with
thermal bridge and lacquered alumuminium cover-trims.
Vinyl coated plasterboards
DIMENSION:
Tickness : 104 mm
Width : 1200 mm
Height up to 3000 mm
|
|
|
The legal requirements for fire protection must be considered in the interior design. With its many standard systems, Schüco offers a versatile range of products for windows, doors and glazing.
|
|
|
Fire Evolution is the flushed glazed version of the "Fire" system. The glass is bonded to the aluminium profile by a self-adhesive tape to enhance clearness and transparency of the glass. The partition features the easy installation, flexibility, modularity, cabling, acoustic performances, and accessories typical of the Fire system.
|
|
|
Fire is a system of partition wall, cladding and equipped walls with a high level of flexibility and performance that allows a complete integration between its own components and other architectonic and interior elements. The partition can be composed by transparent and/or solid modules, transparent or solid doors, cable trunks, shelves, venetian blinds and other accessories.
|
|
|
THICKSET® block provides a 90-minute fire rating. The Endura™ pattern's narrow flute provides moderate light transmission/maximum privacy.
|
|
- Ultimate glass block solution
- Three solid inches of glass which resists bullets, fire, noise, graffiti and force able entry
- Classified by UL® for use as a 45- or 60- minute-rated window assemblies
- Two available patterns: clear for good visibility or stripped for added privacy
- Thicker-face = 3.0"
- Sound Transmission Class (S.T.C) = 53
|
|
|
THICKSET 60 block provides 60-minute fire rating. The DECORA® pattern provides maximum light transmission with subtle visual distortion. The nondirectional faces make installation quick.
|
|
|
|
|
|
Savour comfort when walking
The ultimate underfoot experience with NORTEC raised floor panels made of calcium sulphate (gypsum fibre) - a non-combustible material with excellent structural and physical properties.
NORTEC floors offer an exceptional range of benefits:
* Extreme strength
* Highest quality from raw material to the finished panel
* Highly effective sound-proofing
* Calcium sulphate panels are virtually emission-free (Institute for
Construction Biology in Rosenheim)
* Many options for combining with other flooring systems
* Unique appearance, available in factory-bonded stone or parquet or a
standard floor covering, such as rubber, PVC, HPL or carpet.
Looking for a state-of-the-art product with outstanding properties? Then NORTEC is the right product for you.
NORTEC raised floors and the Lindner dry flooring system FLOOR and more® are available as "FLOOR and more® sonic" offering ventilation and outstanding acoustics, "FLOOR and more® power" which withstands particularly arduous loads and "FLOOR and more® comfort" which integrates heating and cooling technology.
|
|
| ... products without information |
| |
|
WILLSTRONG® Aluminum Composite panel, consists of an extruded thermoplastic core laminated between two sheets of aluminum, create a masterpiece in the history of development of WILLSTRONG. By utilizing Kynar500® PVDF(70% Polyvinylidene Difluoride) and excellent Polyester coating, WILLSTRONG® Standard Aluminum Composite panelis featured with excellent durability and flexibility, chemical resistance, superior ability to withstand humidity, impact, mortar, salt fog, graffiti and alkaline. Furthermore, WILLSTRONG® Standard Aluminum Composite panelexhibits excellent resistance to color change, chalking, out-standing color and good gloss retention.
|
|
|
Rousing! Europeans architects are burning interested in PHaum fire resistant panels. Due to technical Know-How, varieties of colour and shape and top quality this panel Is the new flame of our customers. In the limelight! Composite panels, non-combustible insulation, fire resistance up to F180. A modular alternative tor a beautiful, extra-ordinary lifestyle!
|
|
|
These systems provide high performance in terms of thermal and sound insulation and resistance to fire as well as in terms of shock resistance and in high humidity environments
|
|
VIR series fire door holder magnets EN1155
- EN 1155 Certified
- All the fire door holder magnets include articulated
and fix armature plate
- HRV High Resistance to Vandalism models made
in cast metal
- 20Kg or 50Kg holding force models
- Reliable, no mechanical part
- Fail safe
- Built-in varistor for to eliminate back EMF damaging
control equipment
- Easy-to-install
- No residual magnetism
- Silent operation
- Self aligning
- input voltage: 24V or 48V option
- Consumption: from 24mA to 48mA according to the model
|
|
| ... products without information |
| |
|
WILLSTRONG® Aluminum Composite panel, consists of an extruded thermoplastic core laminated between two sheets of aluminum, create a masterpiece in the history of development of WILLSTRONG. By utilizing Kynar500® PVDF(70% Polyvinylidene Difluoride) and excellent Polyester coating, WILLSTRONG® Standard Aluminum Composite panelis featured with excellent durability and flexibility, chemical resistance, superior ability to withstand humidity, impact, mortar, salt fog, graffiti and alkaline. Furthermore, WILLSTRONG® Standard Aluminum Composite panelexhibits excellent resistance to color change, chalking, out-standing color and good gloss retention.
|
|
|
Rousing! Europeans architects are burning interested in PHaum fire resistant panels. Due to technical Know-How, varieties of colour and shape and top quality this panel Is the new flame of our customers. In the limelight! Composite panels, non-combustible insulation, fire resistance up to F180. A modular alternative tor a beautiful, extra-ordinary lifestyle!
|
|
|
|
see the results for the following category : 
