|
|
|
UPLIGHT IP65 floor/ground recessed luminaire. Steel body with polymer outer casing and upper trim ring in silver anodised aluminium. Adjustable tilting reflector (max. 60°). IP65 protection. With transparent glass protection. For QT-32 incandescent or HIT metal halide discharge lamps.
|
|
Lamp: T2 6W
Lamp type : fluorescent
Lamp base : GX53
Light distribution: down
Power supply : 230V-50Hz
Degree of protection: I
Ip rating : IP67
Material: Aluminium
Glowtest: no
Standard: EN60598-1
Fixation: floor
Mounting: recessed
Weight: 0,86 kg
|
|
General
Order code 6842.B4 alu grey
Mounting Ground recessed
Lamps description 1 x PAR38 120w E27
Color Alu grey
Notes HPF on request
Optical
Reflector finish Anodized pure aluminium
Aiming Fixed
Luminous distribution symmetry Symmetric
Electrical
Emergency Without
Voltage (V) 230
Physical
Place of use Outdoor
Cutout shape Round
Cutout diameter (mm) 230
Recessed depth 230
Construction materials Corrosion resistant die-cast aluminium
Weight (kg) 4.4
|
|
HOUSING: Supplied with a extrude aluminium frame stainless steel.
DIFFUSER: 12mm thick thermal shock and impact resistant tempered glass.
COATING: Graphite grey polyester powder coating applied, resistant to corrosive and saline environments.
EQUIPMENT: Fibreglass nylon cable gland, Ø ½ ? gas.
REGULATIONS: Manufactured in compliance with EN60598 - CEI 34 - 21 standards. The level of protection complies with the EN60529 standard.
|
|
Recessed fixtures with an elegant design, ideal for lighting environments to create suggestive settings with light. Thanks to its high protection level (IP67) this fixture can be used both indoors and outdoors. All the fixtures of the Walkie Talkie series are the walk-over type. The whole range of products can be used in shops, cinemas and places of recreation/entertainment in general, leaving the designer free to play with the light, to blend in perfectly with the architecture.
Light Sources:
Light Source Halogen (QT-9 Trasp.Standard) with socket G4 (20W).
Emissions:Direct
Power supply:
It is impossible to install any kind of transformer (electromagnetic or electronic) inside the product housing due to heat problems.
Body:
Low profile fixture, usable in all those cases where there is very little room on a wall or on the floor with a very shallow gap. Body in die-cast aluminium with antioxidant electroplating treatment, the bottom sealing glass is in sanded or transparent Pyrex® while the top glass is tempered with a partly sanded finish, 10 mm thick. The visible bezel is made in sandblasted stainless steel with a silicone seal. To guarantee the IP67 protection level, Walkie Talkie utilises a neoprene power cable (preassembled, 30 cm long) locked by a PG11 fairlead with resin finish inside; the sealed connecting system is supplied. Possible to mount on plasterboard walls or ceilings using the specific models provided with fixing springs; the ceiling version does not have the top decorative glass and is only available in the round version. All codes of the Walkie Talkie family, ending with a .T, have a transparent sealing glass. Acid-treated glass is
|
|
|
Cast aluminium body, phosphochromate treated and powder-painted. A4 stainless steel screws. Cast aluminium locking ring. PVC sleeve with fibreglass-reinforced nylon locking ring (to be ordered separately). 12 mm clear flat tempered glass cover. Installation in sleeve set in concrete, with a 20-30 cm gravel drain bed. Fittings come with one or two 3 x 1,5 mm² or 3 x 2,5 mm² H07RNF cables, 1 m in length.
|
|
|
Cast aluminium body, phosphochromate treated and powder-painted. A4 stainless steel screws. AISI 316 stainless steel locking ring. PVC sleeve with fibreglass-reinforced nylon locking ring (to be ordered separately). 15 mm clear flat tempered glass cover. Installation in sleeve set in concrete, with a 20-30 cm gravel drain bed. Fittings come with one or two 3x1.5 mm2 or 3x2.5 mm2 H07RNF cables, 1 m in length Versions for other types of lamps are available on request.
|
|
|
Cast aluminium body, phosphochromate treated and powder-painted. Cast aluminium locking ring. Anti-vandalism A4 stainless steel screws PVC sleeve with aluminium locking ring. 12 mm clear flat tempered glass cover. Installation in sleeve set in concrete, with a 20- 30 cm gravel drain bed. Fittings come with one 3x1.5 mm2 H07RNF cable, 3.0 m in length Versions for other types of lamps are available on request.
|
|
|
Cast aluminium body, cataphoresis treated and powder-painted. A4 stainless steel screws. Cast aluminium dome with 1 opening. PVC sleeve with fibreglass-reinforced nylon locking ring (to be ordered separately). 8 mm convex clear tempered glass cover. Installation in sleeve set in concrete, with a 20- 30 cm gravel drain bed. Fittings come with one or two 3x1.5 mm2 H07RNF cables, 1.0 m in length. Versions for other types of lamps are available on request.
|
|
|
TITANO: ground or buried fixture for direction lighting. IP67 protection grading. Stainless steel body. 3 year anticorrosion guaranty. Can withstand a vehicle with 3,5 tons per a wheel at a max. 30Km/h.
|
|
- Available with LED and MR16 halogen lamps. Lamp info: LED, MR16.
- Heavy walled cast bronze grate and integral concrete pour collar are suitable for drive over applications.
- Stainless steel brackets allow for 360º rotational and 19º vertical aiming.
- Black anodized aluminum lamp holder uses a flush lens to reduce maintenance due to cleaning.
- Lamp holder accepts up to three lens accessories.
- High temperature fitting and silicone seals are used to create a completely water tight lamp compartment.
- Requires remote transformer.
Available in 14 standard colors as well as several bronze metal finishes.
CSA tested & certified to US & Canadian safety standards for wet location landscape use.
|
|
ALTAIR
Recessed lighting fixture water proof IP67
Aluminium body with anodic protection; high transparency glass and high resistance (IK10), silicon sealing gasket for high temperatures, stainless steel tightening screws.
More materials and finishing for the closing disk (aluminium, 316L Stainless steel, special painting any colour on demand).
Insulation class ; I
Static charges resistance : 1000Kg
Directional optics +/- 25° with locking (except fluorescent versions)
Product supplied with 1m cable and PVC reservation box and insertion collar.
|
|
Catalog #:IFS70
Description:Indoor/Outdoor Step Light
Lamp:9W TT 2-pin / 13/18/26W DTT 4-pin
Ballast:Electronic 120/277V
Listings:NRTL
|
|
5620 Brunei - Slim LED Lightbar for outdoor flush-embedded applications offering a wide range of luminous effects thanks to a large selection of LED density (40, 60, 120 or 165 LEDs/m). Length on request (max. 2m), width 25mm.
Available in red, yellow/ orange, green, blue, cold white or warm white with dynamic RGB colour change via DMX ou DALI on request.
Recessed in a low (32mm) or deep (82mm) profile acting as cable-path for an easy implementation.
IP68
Chocks resistance 60J
|
|
1830 Lucerne - outdoor marker lighting for ground embedment or wall fixture, circular Ø 100 mm or with squared-flange 100 x 100 offering a large panel of luminous effect (choice of LED quantity, colour and efficiency) .
Available in red, yellow/ orange, green, blue, cold white or warm white with dynamic RGB colour change on request.
Offering various embedment options based on the required type of connection.
IP67
Chocks resistance 60J
|
|
5750 St Rémy - Recessed lightramp for ground installations width 100mm and various lengths on request, equipped with ledmodules (LMS) 1W or 3W offering a great choice of optics.
Choice of colour: cold or warm white, blue, yellow/amber, red, green and quadrichromy.
Dynamic colour control with DMX or DALI.
Stainless steel housing, 15mm thick window with toughened glass, withstands charges up to 5000kg.
IP 67
|
|
1750 Bourgogne - Outdoor LED marker lighting for ground embedment or wall fixture, circular Ø 44mm offering a large panel of luminous effect (choice of LED quantity, colour and efficiency) .
Available in red, yellow/ orange, green, blue, cold white or warm white with dynamic RGB colour change on request.
Offering various embedment options based on the required type of connection.
IP68
Chocks resistance 60J
|
|
A family of recessed floodlights for lamps of up to 150 W. The Terra Midi is the smaller version of the Terra Maxi. An extensive range of light distribution possibilities allows one to envisage a multitude of applications. Embedded into the ground, these floodlights are the ideal complement for the illumination of foliage, façades, architectural details, etc.
The electrical control gear and the optical compartment are placed in a single box made of high quality die cast aluminium alloy and closed by a cover. The cover - a 19 mm thick hardened glass protector - is capable of withstanding the passage of vehicles. It is attached to the body with 4 stainless steel quick-acting clips. The floodlight can be oriented in any direction after installation. IP 67 tightness level is ensured by a double gasket system set in the box and the cover.
|
|
Noctis is a range of recessed luminaires having LED’s (Light Emitting Diodes) as light source.There are 4 basic models - three circular sizes (Mini, Midi and Maxi) and a straight-line version called Linea.
Noctis recessed luminaires are suitable for both indoor and outdoor applications. They can be recessed in the ground, the walls or the ceiling. Depending on the configuration, they can be used for waymarking in public areas such as parks, road side or town squares or illuminating urban landscapes.
Noctis luminaires are equipped with SMT, 5 mm or High Powered LED’s in white, red, blue, green or yellow (other colours on request). Various photometric distributions are available – indirect, semi-direct or direct lighting, narrow, semi-concentric or wide beam distribution, etc.
A multiplicity of possible configurations thus gives the lighting designer and architect the flexibility necessary in defining a scheme’s details and achieving the results wanted.
|
|
|
Recessed spot for exterior use. Die costing aluminium body (frosted natural finish.Led 1W 350mA high emission, with a central emission of the light through a lisa disk with gaskets. IP65 allowed to protect against dust and water infiltrations. Fixing with two different types of aluminium boxes in accordance with the deep of mounting; Boxskill 1 for exterior applications and Boxskill 2 for interior applications. Avaliable RGB version.
|
|
Led recessed lamp weight resistant kg. 500, with
body made of aluminium, complete with casting
end-caps and screen made of clear glass.
Suitable to floor recessing with box. Can be
supplied with white warm light or white cold light.
Available in two different lengths with 6 or 12 set
of 3 Led 1W. Each group of Led beam has an
angle of 25°, wired on circuit board for a best
stability, with dissipation plate in aluminium.
Recessed mounting. Remote driver.
Optimal heat dissipation. IP65.
|
|
Bulk inquiries Only from Architects, Developers and Contractors
Cast aluminium luminaire housing coated with RAL 7037 PE
Housing cover made of borosilicate glass and cast aluminium
With 1 light aperture
Elec. equip.: 1xE27, LMR-IHF 23W (GENURA)
Enclosure class IP67, rate of protection I
Without lamp
Can be rolled-over by max. 1,5 tons wheel-load
Pre-wired by 2m cable H07BQ3 G 1,5mm²
Colour of cover: Glimmer DB 701 (Powder coated)
|
|
Bulk inquiries Only from Architects, Developers and Contractors
Light fitting of aluminium
Cover of polyacrylic glass (PMMA) with frosted surface
Elec.equip.: 1xGX24d-1, TC-D 10/13W
Enclosure class IP54, rate of protection I
Without lamp
Bollard of square-section aluminium tube
Total height 290 mm
Soil insert with 2 openings for cable entry
Colour: Glimmer DB 701
|
|
Application: Luminous beacon especially designed to be integrated in all spaces.
Light unit: Tight and manufactured out of anodic aluminum.
Diffuser: Flat tempered glass, resistant to the changes of temperature and the impacts.
Body: Anodic aluminum completion acrylic paint out of powder polymerized with the oven.
Fixing: 215mm to be sealed.
Casing: Ceramic E27.
Bulbs recommended: Fluorescence compacts 14W and incandescence 75W.
Index of protector: IP67, Class I
|
|
LED paver light
Can be manufactured to measure or according to a model (natural stone or concrete). It can be equipped with 5 up to 35 LED in any colour.
|
|
| ... products without information |
| |
|
AGORA': wall recessed fixture for TC-D fluorescent lamps.
|
|
|