|
|
The TDM series of axial fans have been specifically designed to be installed in low pressure ducted systems.
Single phase motor 230V-50Hz, Class II, IPX4.
Protected against overheating. Suitable to operate within temperatures up to 40C.
|
|
Axial fans for duct connection or wall mounting.
Air flows: 150-9700 l/s
|
|
|
7-bladed profiled die-cast aluminium impeller, sizes from 315 to 1,250 mm, available in both air flow directions, 60 Hz and UL types, air volume (freeblowing) from 2,000 to 62,000 m³/h.
|
|
|
Axial fans equipped with integrated electronic commutation speed controls. The result is a highly efficient and extremely compact speed controlled fan. The electronically commutated ETAvent system offers the highest possible efficiency.
|
|
|
4-bladed aluminium sheet metal impeller, sizes from 350 to 650 mm, available in both air flow directions, 3 different blade angles, 60 Hz and UL types, air volume (freeblowing) from 2,000 to 13,000 m³/h, explosion-proof fans also available.
|
|
Technical Data
----------
Power Supply 220 V
----------
Frequency 50/60 Hz
----------
Current 0.24 to 0.30 A
----------
Noise 62 dBA
----------
Rotation speed 2250 to 2730 rpm
----------
Power 54 to 64 W
----------
Capacity 2 µF
|
|
|
The Jetflow SJ range of all metal in-line centrifugal fans are designed to provide the ideal solution for high performance requirements in medium pressure systems. Ideally suited to a wide range of residential, commercial and industrial extract or supply applications, Jetflow boasts one of the most extensive range of fans on the market to meet system requirements
|
|
|
Double inlet centrifugal fans with forward curved blades in inch dimensions. Impeller diameters from 9 to 15 inch are available, resulting in air volumes up to 11,000 m³/h.
|
|
|
Single inlet centrifugal fans in standard scroll housings with backward curved blades. Impeller diameters from 225 to 315 mm are available, resulting in air volumes up to 2,400 m³/h.
|
|
|
The Ezifit Thru-Wall unit is a surface mounted fan which is specifically developed in response to the need for a fan that does not take up internal space and is suited to ducted systems where space is restricted, such as between floors in residential applications.
|
|
|
The JetVent JISU-CPC range has been specifically developed for emergency smoke spill car park extract systems to safeguard occupants, while removing pollutants with the simplest of operation or as dedicated fans for emergency clearance to overcome hazardous fire, smoke or fume conditions.
|
|
Smoke extract fans
Air flows: Up to 70.000 l/s
|
|
|
|
|
|
Our range of professional roof extract fans is rounded off by new certified and DIBt approved roof smoke-extract fans. These models can operate for two ours at temperatures of 400 °C or 600 °C. Extraction rates of up to approx. 58,000 cbm/h are achieved with two times 23 types.
Smoke-extract roof fans of the lines RDM 56 and RDM 57 are provided for eliminating heat and smoke in case of fire especially in the first phase with usually high smoke content. They have to keep the escape ways smoke free, reduce damages, and ease fire fighting actions.
The advantages of the ER at a glance:
-Air discharge vertical and swirl free.
-Casing made of aluminium.
-Base frame and mechanically stressed parts made of galvanized sheet steel.
-Impeller made of steel, welded and coated.
-Motor separated from air stream.
-Casing side parts removable, centre parts to be swivelled (up to size 7190).
-Ready for connection; free cable lead, protected by a steel tube.
-Fixing bracket for isolator switch or connection box as a standard.
-Isolator switch as an option (loose for fitting on site)
|
|
Ideal for private houses, sports halls, warehouses, garages, bathrooms and toilets
Protection grille, works in all positions, ball bearings
White, ABS high quality plastic
|
|
|
The Hideaway SHM is a duct mounted in-line centrifugal fan with dual circular inlet spigots, designed specifically for installations where space is at a premium and noise levels are an important design criteria. The SHM is designed with a two speed motor where ventilation is either by continuously running, or boost ventilation when there is full occupancy.
|
|
The MegaBox-models offer these special properties:
- Acoustically insulated high performance centrifugal fan.
- Swing out ventilation unit for easy cleaning and maintenance.
- Speed controllable IEC-flange motor mounted outside the air stream with thermal overload protection.
- High total efficiency, small energy consumption and low sound level using high perfomance-centrifugal impeller.
- Low cost power control.
The MegaBox will suit the most demanding applications especially when extreme operating conditions prevail.
Typical applications are transporting dirty, greasy, hot (up to 100 °C) and humid air, against high resistances in commercial and industrial applications.
|
|
Range of centrifugal single inlet fans suitable for continuous extraction of airstreams temperature up to 80?C (Series 1) or 150?C (Series 2 and 3).
All casings are manufactured from electro-welded sheet steel protected against corrosion by grey epoxy-polyester paint coating.
All models incorporate forward curved centrifugal impellers manufactured from galvanised sheet steel.
Available, depending upon the model, with single or three phase motors in 2, 4 or 6 poles.
|
|
|
Ready-to-install C series single inlet motorised impeller modules, with impeller diameters from 225 to 630mm. The air handling capacities correspond to the respective RH..C types. The sheet metal parts are made from galvanized sheet steel.
|
|
|
Centrifugal fans equipped with integrated electronic commutation speed controls. The result is a highly efficient and extremely compact speed controlled fan. The electronically commutated ETAvent system offers the highest possible efficiency.
|
|
|
Cross-flow fans with cylinder diameters from 60 to 120 mm and construction lengths of up to 1,200 mm. Housing with flow-through in 90° or 180° direction. Housing made using stable aluminium continuous-casting technology. Cylinders available in all frame sizes with and without scroll housings.
|
|
|
Motorless RH..C impeller with 7 rear curved blades. Impeller diameters from 225 to 1,120 mm, made from sheet steel with surface protection achieved through powder coating. Equipped with hub (taper lock hub or fixed hub) and inlet ring.
|
|
Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 160 to 800 models) or with metal casing steel finished in a tough epoxy-polyester paint coating(from 1000 to 6000 models).
The unique design of the support bracket allows the motor and impeller assembly to be fitted or removed without dismantling the adjacent ducting.
|
|
Slim line axial flow fans for wall or ceiling installation, designed to remove odours and moisture in small rooms, toilets and bathrooms.
The DECOR Series are easy to install, aesthetically pleasing, slimeline and extremely quiet
The DECOR range consists of three different models: DECOR-100, DECOR -200 and DECOR -300, available with different integrated control options to accommodate all application requirements.
|
|
Fans for ventilation of toilets and bathrooms.
Air flows: 17-80 l/s
|
|
Kitchen Exhaust Fans
with double skinned casing and with IEC-motor
max. V= 6.000 m³/h
max. pt= 1900 Pa
suitable for installation where the air is slightly soiledor greasy or the air temperature is up to 100°C
Application:
commercial kitchen
|
|
|
|