|
|
|
The new EBH air handling units are available in 4 sizes, for horizontal concealed installation, 2 and 4 pipe systems. These units, thanks to their high E.S.P. fans, are suitable for centralised ducted air distribution with external static pressure values up to 250 Pa. They are therefore suitable for air conditioning and heating in every kind of big environments.Hydraulic connections can be right hand or left hand, because they can be reversed on site. 4 brackets are supplied together with the unit, in order to fix it on the ceiling.
|
|
|
The MAESTRO Fan Coil Units are for concealed installation and connection to a duct system. They supply a consistent air flow with static pressure up to 150 Pa. The MAESTRO Fan Coil Units are manufactured in 5 sizes for hot water supply (11-42 kW) and chilled water supply (4-16 kW).
|
|
|
The SLIM ducted fan coils can be used to economically heat and/or cool small and medium-sized civil, commercial, industrial and sporting facilities. They have been designed and built for horizontal concealed installation. The range features 4 sizes, each with 5 speed fans, 3 of which connected on the terminal block. Numerous wired controllers are available, as well as infrared remote control.
|
|
Water terminal unit
Built-in horizontal indoor installation
Capacity from 1,5 to 2,8 kW
Room control HID-T2 for wall-mounted remote installation with functions of:
-manual or automatic summer/winter selection
-4 temperature setting
-automatic or manual setting of fan speed
-other useful functions.
ELFORoom UP is the built-in horizontal water terminal unit for residential use.Room terminal units have always been one of the most critical points in airconditioning systems due to problems of noise as well as stratification and filtration of air.Clivet has an innovative approach to these types of elements, which goes beyond the concept of fan coil and offers a new way of providing individual comfort.The ELFORoom series is fitted with a special direct-current external rotor motor and with integrated electronics for a modulating control of the speed of rotation. The temperature is controlled through continual adaptation of the fan speed. This results in the following benefits:
-even temperature throughout the room: the continual modulation of the ELFORoom UP speed ensures continual movement of the air
-reduced noise levels: the control allows continuous adaptation of the speed and its variations become background noise
-filtration: the continual movement of the air allows constant filtration through the large filter, which is accessible without needing tools
-less use of the installed power: the exclusive electric motor of the fan brings great benefits in terms of absorption, which is 80% less than with a traditional fan coil, power being equal.ELFORoom UP comes with all the necessary parts for complete installation (cutoff taps, etc.) and operation.
|
|
Water terminal unit
Exposed vertical and horizontal indoor installation
Capacity from 1,5 to 9 kW
ELFOSpace OUT is the exposed water terminal for use in the services sector.Muted lines that blend in with any decor.The available controls are simple and user-friendly, satisfying the most varied of requirements, with top-of-the-range electronic control designed for connection to the ELFOControl or general supervisors.Low noise operation and easy to clean.These are the concepts behind the development of ELFOSpace, the last generation room terminal unit that is ideal for any installation.Ten sizes available with an almost countless number of accessories for resolving any service application requirement.The ELFOSpace OUT-V series has been designed specifically for exposed vertical installation and the ELFOSpace OUT-H range for exposed horizontal installation.
|
|
Water terminal unit
Built-in horizontal indoor installation
Ductable
Capacity from 8,7 to 40,3 kW
Room control HID-T2 for wall-mounted remote installation with functions of:
-manual or automatic summer/winter selection
-temperature setting
-manual setting of fan speed
-other useful functions
The ELFODuct CF units are ideal air-treatment terminal units for installations where ducted air distribution is necessary.They are designed for installation in suspended ceilings and are distinguished by their compactness and extremely low noise levels obtained thanks to both internal and external insulation.
The 91 and 121 versions may be ceiling or floor mounted.
The main features are:
-various available controls, from simple speed control through to the electronic control set-up for connection to ELFOControl or general supervisors;
-available in version for 2 and 4-pipe systems;
-wide choice of aeraulic accessories (plenum for round ducts, fresh air intake plenum);
-electric heater section with different power plus electronic power modulation control;
-high head-pressure fans for ducted air distribution.
|
|
The FUN is available in 3 sizes. Its rate of flow range is comprised between 100 and 1 400 m3/h.
Its small height allows it to be inserted in difficult applications, or allows suppression of condensate pumps.
The exceptional available pressure allows meeting the requirements of hotels, office building, hospital…where the equipment is installed over less sensitive areas and connected to highly consequent air duct network.
Of simple modular design, this equipment offers a great facility of mounting in false ceilings or floors.
Eurovent approved equipment.
|
|
Ventilo-convector ceiling light at pressure available and variable speed.
Conceived for an installation in corridor of circulation with sheaths blowing/begun again on the same face.
Size 3.3 is conceived to be placed under flagstone of 600mm.
Quality of air
- regulation of air nine from 30 to 160 m3/h.
- filter folded EU5
Version 2T/2F or 4 tubes with communicating regulation MAESTRO on network Carrier CCN.
Communicating regulation MAESTRO on network Carrier CCN User interface convivial making it possible to manage:
- Temperature
- Modes (occupied/unoccupied)
- Shift not of instruction
- Ventilation of Air Force
- Lights
- Blinds.
|
|
| ... products without information |
| |
... see all the products in the category
Fan coils
|
ER recessed-mouned housing and fan inserts
Single-duct air extraction system ER: elegant design, powerful but still very quiet
For decentral air extraction of
· Bathrooms
· Kitchens
· Dining rooms
· Lounges in multi-family buildings
Fan cover with integrated filter
Thermal overload protection as standard
Recessed-mounted housing with and without fire protection
Quick installation thanks to snap-in fittings
Centrifugal fan extremely steep characteristic curve
Very quiet
IPX 5, approved for installation in protection area 1 in sanitary rooms
Available in numerous electronic control versions
Airflow volume 60 resp. 100 m³/h
|
|
|
|
