|
|
FLAT by Galletti represents a new generation of fan coil units and has been engineered to offer performance and design features placing it at the top of its category.
FLAT means innovation also in terms of engineering: it combines a guarantee of excellent low-noise performance with the advantage of an exclusive design that fits well with both residential and commercial settings.
The construction concept allows to standardize the models for vertical mounting and those for horizontal mounting: 2 versions for floor, wall or ceiling installation.
The uniqueness of FLAT lies both in the use of extremely high quality materials - which contribute to making this product exceptionally robust - and the assurance of constant performance over time.
CABINET WITH A REFINED DESIGN
Colour RAL9010
Front panel made of sheet steel
Side panels, upper grill and side doors manufactured from UV-stabilised ABS to maintain the colour intact over time.
Upper grill made of adjustable louvers and flap.
The flap features a microswitch that automatically shuts down the unit when the flap itself is closed.
The side doors provide access to the control panel and compartment housing the plumbing connections. The doors may be secured by screws to prevent opening.
BEARING STRUCTURE
Made of thick galvanized steel sheet, insulated withself-extinguishing Class 1 heat-insulating panels.
Both versions are suitable for either vertical or horizontal installation thanks to the dual condensate collection and drainage system.
HEAT EXCHANGER
High-efficiency heat exchanger, made of copper pipe and aluminium fins fixed to the pipes by means o mechanical expansion, equipped with brass manifoldsand air purge valve.
The units normally come with water connection on left side,butthe heat exchanger, and can be turned, on the field, by 180°.
On request it is possible to install an additional 1 row heat exchanger, for the connections to the hot water circuit in 4 pipe system.
FAN MOTOR ASSEMBLY
Thanks to the new fan-drive assembly, FLAT ranks at the top of the category of indoor air-conditioning units in terms of low-noise operation.
The fan motor assembly Includes 1 ore 2 centrifugal fans with staggered airfoil-shaped blades, manufactured from anti-static ABS.
The fans are housed in a low-noise ABS volute distinguished by a compact, high-efficiency profile.
The 3-speed electric motor is directly coupled to the centrifugal and installed on vibration-damping supports; it comes complete with builtin capacitor and thermal protection for the windings. Six speed motor available on request.
AIR FILTER
Washable air filter made of beehive polypropylene, installed on galvanized sheet frame with safety grille, easy to remove for maintenance. The filter may be secured to the unit by means of screws.
in the “U” version the air filters are inserted in the intake grilles on the front panel of the cover cabinet.
CONTROL PANELS
New control panels for controlling and regulating the temperature by means of a microprocessor-based system, which adapts the operation of the fan coil automatically when room conditions change.
FLAT fan coils units can be connected to ERGO network.
The innovative BIOXIGEN system, applicable on all units, guarantees high standards of quality and
purification of interior air as well as of the fan coil unit itself. |
|
The new Cassette fan coil unit has been biult for installations in suspended modular or not ceilings, for 2 or 4 pype systems.
Supplied with water, it is suitable for air heating and cooling purposes according to the requirements.
The unit, completed with the condensate pump, can be supplied by request of an additional air delivery that can be connected to ducts for a separate supply air, and of additional extarnal air intakes.
The air intake panel directs the air flow in order to prevent that air hits the user directly. Therefore, the maximum confort is ensured in every enviroment and position.
The Cassette unit can be managed by all the range of Eurapo regulation (valves and controllers). |
|
Ceiling-mounted fan convectors
Cassette units
Based on the Kampmann fan convector, this unit has been designed specifically for use within ceiling grids.
Function
heating with low flow and return temperatures is especially economical and efficient
ventilating with recirculating air or - more effectively - with outside air
filtering of recirculating and outside air
recirc. mode for all food and retail premises, fitness facilities, gyms etc.
mixed air mode for all the same places but with the added advantage of fresh air supply
|
|
| Innovative and fascinating design, seven different models, high control flexibility, ease of maintenance: the new SKYSTAR water cassette is the result of significant technical and design research focused on providing an avant-garde product in terms of performance, low noise and control flexibility. |
|
| The new EBH air handling units are available in 4 sizes, for horizontal concealed installation, 2 and 4 pipe systems. These units, thanks to their high E.S.P. fans, are suitable for centralised ducted air distribution with external static pressure values up to 250 Pa. They are therefore suitable for air conditioning and heating in every kind of big environments.Hydraulic connections can be right hand or left hand, because they can be reversed on site. 4 brackets are supplied together with the unit, in order to fix it on the ceiling. |
|
| The MAESTRO Fan Coil Units are for concealed installation and connection to a duct system. They supply a consistent air flow with static pressure up to 150 Pa. The MAESTRO Fan Coil Units are manufactured in 5 sizes for hot water supply (11-42 kW) and chilled water supply (4-16 kW). |
|
| The SLIM ducted fan coils can be used to economically heat and/or cool small and medium-sized civil, commercial, industrial and sporting facilities. They have been designed and built for horizontal concealed installation. The range features 4 sizes, each with 5 speed fans, 3 of which connected on the terminal block. Numerous wired controllers are available, as well as infrared remote control. |
|
Prisma series well identifies the smooth lines and details that Architects and Designers are more and more pursuing in their projects: actually, the Prisma fan coil units, thanks to their design and to a wide range of colours, shall be easily integrated in every single environment.
They are available in different configurations: installed on the floor, with bottom or frontal air intake (and support feet as optional), as well as ceiling mounted, with rear or bottom air intake.
Prisma casing is manufactured with sheet steel and painted with oven dried epoxy powders; it is available in the wide range of RAL colours, with access doors and grilles in grey thermoresistant ABS. Grilles can be turned in all 4 directions.
The air filter, totally foldaway but easy to remove, is particularly strong and wear resistant and needs very short time for the execution of the ordinary maintenance operations.
In order to make Prisma model more complete, Eurapo also offers a wide choice of accessories, starting from electromechanical regulators and on/off valves, to the most advanced systems with modulating valves and digital supervision by BUS. |
|
| Sigma series well identifies the smooth lines and details that Architects and Designers are more and more pursuing in their projects: actually, the Sigma fan coil units, thanks to their design and to a wide range of colours, shall be easily integrated in every single environment. |
|
There is something new in the wide and prestigious Eurapo's production: SPHERA, the fan coil designed to satisfy the increasing needs of style and comfort.
Thanks to its shape, to its compact dimensions (depth 190 mm with centrifugal fan) and to its great innovative technical features, SPHERA met a widespread approval from all the market dealers during the official presentation at "Mostra Convegno Expocomfort 2002".
SPHERA can be installed either on the wall or on the floor and is suitable with all the brand new Eurapo's controls: from the traditional ones (mechanical or with microprocessor), to the most innovative ones, which use digital technology in order to be integrated with Building Automation systems.
SPHERA fits into Eurapo's settled experience and reliability, given by its growing and unfailing technical and design research.
This is definitely the most revolutionary way to conceive the fan coil! |
|
The Futura fan coil combines innovative design with the traditional reliability and low noise of Sabiana products. The rounded shape of the cover cabinet and the white and light grey colours allow integration into all types of environments.
Available with centrifugal or tangential fans, installed in view, concealed or residential versions, the units can be controlled by numerous types of wired controllers or infrared remote controls. |
|
HIGH WALL FAN COIL FOR CHILLED WATER OR BOILD WATER UP TO 80centigrade
WITH BUILT-IN WATER SOLENOID VALVE FOR STANDARD MODEL OR FOR OPTION
EASY CONTROLLER BY LARGER LCD SCREEN REMOTR CONTROLLER AND THERMOSTAT CONTROLLER FOR OPTION
LESS WATER DROP PRESSURE QUIET OPERATION
INSTALLED WITH FLEXIABLE STAINLESS STEEL WATER INLET/OUTLET PIPE
ELEGENT APPEARANCE OF UNIT DESIGN
CE/ROHS
Water is used as an exchange fluid instead of gas, thus guaranteeing notable advantages for energy saving, installation requirements and for the environment.Since they work with an hydraulic circuit, wall-mounted fan coils can be connected to water chillers, boilers.
|
|
<< back to funcoil units
PRISMA
Prisma series well identifies the smooth lines and details that Architects and Designers are more and more pursuing in their projects: actually, the Prisma fan coil units, thanks to their design and to a wide range of colours, shall be easily integrated in every single environment.
They are available in different configurations: installed on the floor, with bottom or frontal air intake (and support feet as optional), as well as ceiling mounted, with rear or bottom air intake.
Prisma casing is manufactured with sheet steel and painted with oven dried epoxy powders; it is available in the wide range of RAL colours, with access doors and grilles in grey thermoresistant ABS. Grilles can be turned in all 4 directions. |
|
There is something new in the wide and prestigious Eurapo's production: SPHERA, the fan coil designed to satisfy the increasing needs of style and comfort.
Thanks to its shape, to its compact dimensions (depth 190 mm with centrifugal fan) and to its great innovative technical features, SPHERA met a widespread approval from all the market dealers during the official presentation at "Mostra Convegno Expocomfort 2002".
SPHERA can be installed either on the wall or on the floor and is suitable with all the brand new Eurapo's controls: from the traditional ones (mechanical or with microprocessor), to the most innovative ones, which use digital technology in order to be integrated with Building Automation systems.
SPHERA fits into Eurapo's settled experience and reliability, given by its growing and unfailing technical and design research.
This is definitely the most revolutionary way to conceive the fan coil! |
|
| The Sabiana Mistral high wall fan coils harmoniously combine the needs of performance, silence, ease of assembly and simplified maintenance, with a range of 4 models, available with multifunction remote control. |
|
Water terminal unit
Cassette-type indoor installation
Capacity from 2,68 to 11 kW
The ELFOSpace BOX2 terminal unit has been designed for installation in suspended ceilings without requiring any extra part for operation. The unit has an intake grille and four-way outlet with adjustable diffuser flaps for changing airflow direction.The ELFOSpace BOX2 is therefore suited for use in environments such as shops, restaurants, hotels and gyms, where the excellent outflowing air control makes them ideal air-conditioning units:
-available in version for 2 and 4-pipe systems;
-available in electro-mechanical or electronic version with set-up for connection to ELFOControl or general supervisors;
-possibility of controlling several units from a single point;
-suited for installation in standard suspended ceilings with 600 x 600 mm module;
-the unit comes with a condensate drain pump (500 mm vertical). |
|
Water terminal unit
Exposed vertical and horizontal indoor installation
Capacity from 1,5 to 9 kW
ELFOSpace OUT is the exposed water terminal for use in the services sector.Muted lines that blend in with any decor.The available controls are simple and user-friendly, satisfying the most varied of requirements, with top-of-the-range electronic control designed for connection to the ELFOControl or general supervisors.Low noise operation and easy to clean.These are the concepts behind the development of ELFOSpace, the last generation room terminal unit that is ideal for any installation.Ten sizes available with an almost countless number of accessories for resolving any service application requirement.The ELFOSpace OUT-V series has been designed specifically for exposed vertical installation and the ELFOSpace OUT-H range for exposed horizontal installation. |
|
Water terminal unit
Built-in horizontal indoor installation
Ductable
Capacity from 8,7 to 40,3 kW
Room control HID-T2 for wall-mounted remote installation with functions of:
-manual or automatic summer/winter selection
-temperature setting
-manual setting of fan speed
-other useful functions
The ELFODuct CF units are ideal air-treatment terminal units for installations where ducted air distribution is necessary.They are designed for installation in suspended ceilings and are distinguished by their compactness and extremely low noise levels obtained thanks to both internal and external insulation.
The 91 and 121 versions may be ceiling or floor mounted.
The main features are:
-various available controls, from simple speed control through to the electronic control set-up for connection to ELFOControl or general supervisors;
-available in version for 2 and 4-pipe systems;
-wide choice of aeraulic accessories (plenum for round ducts, fresh air intake plenum);
-electric heater section with different power plus electronic power modulation control;
-high head-pressure fans for ducted air distribution. |
|
Water terminal unit
Built-in horizontal indoor installation
Capacity from 1,5 to 2,8 kW
Room control HID-T2 for wall-mounted remote installation with functions of:
-manual or automatic summer/winter selection
-4 temperature setting
-automatic or manual setting of fan speed
-other useful functions.
ELFORoom UP is the built-in horizontal water terminal unit for residential use.Room terminal units have always been one of the most critical points in airconditioning systems due to problems of noise as well as stratification and filtration of air.Clivet has an innovative approach to these types of elements, which goes beyond the concept of fan coil and offers a new way of providing individual comfort.The ELFORoom series is fitted with a special direct-current external rotor motor and with integrated electronics for a modulating control of the speed of rotation. The temperature is controlled through continual adaptation of the fan speed. This results in the following benefits:
-even temperature throughout the room: the continual modulation of the ELFORoom UP speed ensures continual movement of the air
-reduced noise levels: the control allows continuous adaptation of the speed and its variations become background noise
-filtration: the continual movement of the air allows constant filtration through the large filter, which is accessible without needing tools
-less use of the installed power: the exclusive electric motor of the fan brings great benefits in terms of absorption, which is 80% less than with a traditional fan coil, power being equal.ELFORoom UP comes with all the necessary parts for complete installation (cutoff taps, etc.) and operation. |
|
Water terminal unit
Exposed vertical and horizontal indoor installation
Capacity from 1,5 to 9 kW
ELFOSpace OUT is the exposed water terminal for use in the services sector.Muted lines that blend in with any decor.The available controls are simple and user-friendly, satisfying the most varied of requirements, with top-of-the-range electronic control designed for connection to the ELFOControl or general supervisors.Low noise operation and easy to clean.These are the concepts behind the development of ELFOSpace, the last generation room terminal unit that is ideal for any installation.Ten sizes available with an almost countless number of accessories for resolving any service application requirement.The ELFOSpace OUT-V series has been designed specifically for exposed vertical installation and the ELFOSpace OUT-H range for exposed horizontal installation. |
|
Water terminal unit
Built-in vertical indoor installation
Capacity from 1,5 to 3,5 kW
Room control HID-T2 for wall-mounted remote installation with functions of:
-manual or automatic summer/winter selection
-temperature setting
-manual setting of fan speed
-other useful function
ELFORoom IN is the built-in vertical water terminal unit for residential use.Room terminal units have always been one of the most critical points in airconditioning systems due to problems of noise as well as stratification and filtration of air.Clivet has an innovative approach to these types of elements, which goes beyond the concept of fan coil and offers a new way of providing individual comfort.The ELFORoom series is fitted with a special direct-current external rotor motor and with integrated electronics for a modulating control of the speed of rotation. The temperature is controlled through continual adaptation of the fan speed. This results in the following benefits:
-even temperature throughout the room: the continual modulation of the ELFORoom IN speed ensures continual movement of the air
-reduced noise levels: the control allows continuous adaptation of the speed and its variations become background noise
-filtration: the continual movement of the air allows constant filtration through the large filter, which is accessible without needing tools
-less use of the installed power: the exclusive electric motor of the fan brings great benefits in terms of absorption, which is 80% less than with a traditional fan coil, power being equal. |
|
Water terminal unit
Indoor installation, wall-mounted with cabinet
Capacity from 1,20 to 5,30 kW
ELFOSpace Wall is a range of open water terminals that are cleverly designed for quick, easy and discrete installation in the space above doors or at mid-height on walls. These exceptionally low noise units also feature air flow direction control and come with all the components needed for installation and start-up (template, three-way valve and infrared remote control). |
|
Available in 3 sizes.
These ceiling equipment allow the treatment of air using a laminar blowing effect (Cohanda).
In this aim, they are inserted between the false ceiling plates, since they are of the same standard dimensions (600 x 600 mm).
Particularly suited to erection of buildings offices, the ceiling plate is available in RAL 9010 standard paint.
EUROVENT approved equipment. |
|
Chassis manufactured from galvanized steel. An acoustic and anticondensation insulation is fitted within. Air flow by means of four rectangular opening
Main heat exchanger: Copper tubes/aluminium fins with threated connections; each coil is fitted with a manual air vent and drain plug. The coil is tested at a pressure of 15 ATE.
External rotor fan with ABS centrifugal impellers, single inlet, statically and dynamically balanced.
Single phase 230V 50Hz motor, induction type, fitted with condenser. The motor complies with IP41 protection class and ECM Standards (EC89/336, EC92/31, EC93/68) and with low voltage standards (Art. 10, EC73/23). Available with 3 speeds.
Main drain pan manufactured from preformated plastic material.
Filter: syntetic media with a galvanized sheet frame with mesh on both sides.
|
|
The FUN is available in 3 sizes. Its rate of flow range is comprised between 100 and 1 400 m3/h.
Its small height allows it to be inserted in difficult applications, or allows suppression of condensate pumps.
The exceptional available pressure allows meeting the requirements of hotels, office building, hospital…where the equipment is installed over less sensitive areas and connected to highly consequent air duct network.
Of simple modular design, this equipment offers a great facility of mounting in false ceilings or floors.
Eurovent approved equipment.
|
|
Thalassa fan convector are reversible heating and air conditioning.
The offered range includes 4 models and 5 sizes, with powers from 5 kW cold production and 11 kW hot production.
Since there is no residual pressure with this equipment, they are used for direct blowing either hanging or wall mounted but never with air shaft.
Easily integrated in any type of premises due to its discrete presentation and RAL 9010 epoxy painted frame.
Aircalo offers a wide scope of flow control customization.
|
|
This unit can be used for heating and/or ventilation as well.
2 steps heating (2 - 3 KW), with outlet down directed. Airflow is 220 m3/h, this guarantee fast and homogeneous air treatment of the volume. In the summer, the unit can be used for ventilation only.
Renewable filter G4.
Régulation with thermostat on board. |
|
Cassette Terminal units for air/water
Chillers and Heat Pumps
5 sizes - 2 and 4-pipe coils
Cooling capacity: from 2150 to 9920 W
Heating capacity: from 2830 to 13000 W
Available with both infrared remote controller and wired remote controller
The CWX units are water chilled Terminal units designed for the air conditioning of commercial premises such as shops, offices, stores, meeting rooms, commercial surfaces, hotels.
Their installation in the false ceiling allow to hide the supply pipes, leaving wall spice completely clear. The models CWX3 and CWX5 can be extremely discreetly installed, their dimension being exactly the same as those of the false ceiling panel (600mmx600mm).
Available versions: 2-pipe coils, 2 pipes/2 wires and 4-pipe coils.
Very low noise level.
The air diffusion is obtained on the 4 sides of the grill.
The units are available with infrared remote controller or wired remote controllers, manual (RAB 30) or automatic (RCC 10 for CWX3/5/6/8/10B5B and RCC 20 for CWX3/5 BE5B/BW5B). The infrared remote controller is provided in standard with the unit, the wired remote controllers are available as accessories.
These cassettes are fitted with a manual air vent and a condensate drain pump.
Fonctions common to all cassette models:
- Cooling or heating by 2-pipe coil.
- Ventilation with integrated filtration. |
|
Ventilo-convector ceiling light at pressure available and variable speed.
Conceived for an installation in corridor of circulation with sheaths blowing/begun again on the same face.
Size 3.3 is conceived to be placed under flagstone of 600mm.
Quality of air
- regulation of air nine from 30 to 160 m3/h.
- filter folded EU5
Version 2T/2F or 4 tubes with communicating regulation MAESTRO on network Carrier CCN.
Communicating regulation MAESTRO on network Carrier CCN User interface convivial making it possible to manage:
- Temperature
- Modes (occupied/unoccupied)
- Shift not of instruction
- Ventilation of Air Force
- Lights
- Blinds. |
|
7 sizes covering a beach of flows going from 90 to 440 l/s.
Very low noise level.
Tangential or Centrifugal ventilator.
New grid of blowing and new folded filter.
Electronic regulation.
New system of fixing facilitating the installation.
Easily modifiable side of hydraulic connection on site.
Single vat for vertical or horizontal installation.
Version 2 tubes, 2 tubes/2 wire, 4 tubes.
Color white ivory (equivalent with the RAL 9010)
Version AQUASMART available |
|
... see all the products in the category
Fan coils
|
|
|