|
|
Water terminal unit
Indoor installation, wall-mounted with cabinet
Capacity from 1,20 to 5,30 kW
ELFOSpace Wall is a range of open water terminals that are cleverly designed for quick, easy and discrete installation in the space above doors or at mid-height on walls. These exceptionally low noise units also feature air flow direction control and come with all the components needed for installation and start-up (template, three-way valve and infrared remote control).
|
|
This unit can be used for heating and/or ventilation as well.
2 steps heating (2 - 3 KW), with outlet down directed. Airflow is 220 m3/h, this guarantee fast and homogeneous air treatment of the volume. In the summer, the unit can be used for ventilation only.
Renewable filter G4.
Régulation with thermostat on board.
|
|
|
|
|
|
Major 2
The Major 2 fan coil unit is designed to be mounted vertically on a wall or horizontally below ceilings to heat and cool homes, businesses and industrial and healthcare facilities. Not only does it combine the economic benefits of installing and operating a central boiler and chiller plant, it also allows individual temperature control in all rooms.
Available in six sizes and two models:
- CH: horizontal cased,
- CV: vertical cased.
Heating capacity: 2 to 20 kW
Cooling capacity: 0.6 to 8 kW
Air flow rates: 115 to 1300 m³/h
- Polymer casing with solid RAL 9010 finish,
- Two access doors lead to air bleed valve and control terminal,
- Water coil: two or four tubes or two tubes and electric heater,
- Condensate drain pan,
- Seven-speed motor (three factory-wired speeds) with balanced, double-inlet aluminium blower wheel,
- Mounting bracket frame,
- Regenerative polyester fibre filter. Efficiency class: G3 (EN 779),
- Fully enclosed electrical junction box,
- A wide selection of control options.
|
|
"THE EUROPEAN REGIONAL DEVELOPMENT FUND AND THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC SUPPORT INVESTMENT IN YOUR FUTURE".
- for heating dry interiors
- very low MINIB convector
(only 80%u2009mm in the floor)
- supplied with any aluminium
or wooden grille
DIMENSIONS
total width 243 mm
construction height 80 mm
length 900-3000 mm
USAGE
Designed for individual use in dry interiors with higher heating demands and low construction height requirements (up to 80%u2009mm) where the deeper COIL-KT units cannot be used.
|
|
"THE EUROPEAN REGIONAL DEVELOPMENT FUND AND THE MINISTRY OF INDUSTRY AND TRADE OF THE CZECH REPUBLIC SUPPORT INVESTMENT IN YOUR FUTURE".
- MINIB self-standing floor convector with a width of only 156%u2009mm
- for heating dry or wet environments
- high heat output convector without fan
DIMENSIONS
total width 156 mm
construction height 230mm
length 900 - 2000 mm
USAGE
Convector SP1/4 is a fast reacting convector, which forms a new design series of MINIB convectors without fans. The aluminium cover of the unit can be supplied with silver, light bronze, dark bronze, white varnished or eloxal coating. The convector is equipped with a 4 tube heat exchanger.
|
|
|
|
|
|
Structure: made from ABS to ensure good mechanical properties and resistance to ageing
Fan assembly: made up of a tangential fan coupled with a three-speed electric motor to ensure very low noise during operation.
Air filter: regenerable by simply washing in water, positioned on the front air intake grill.
Heat exchange coil: copper tubes set out in staggered rows to increase heat exchange, with aluminium fins joined by the mechanical expansion of the tubes. The manifolds are fitted with air vents that are easily accessible by sliding out the front panel.
Electrical control board: located inside the unit, manages the settings sent by the remote control and the solenoid valve.
A water probe is fitted as standard for the hot-start function.
Remote control: complete with LCD for the rapid display of the active functions and for setting the various parameters required for the correct operation of the unit (see the special section).
Three-way valve: located inside the unit and easily accessible by sliding out the front panel.
Prevents excessive cooling of the unit and the formation of condensate when not in operation.
Water connections: the unit is fitted with pairs of water hoses for the connections to the system.
|
|
|
The Zehnder ComfoAir 150 ventilation system was designed for sophisticated residential and commercial buildings, in particular for installation in the wall. The system can be horizontally or vertically installed. It combines highest comfort, simple operation and a high level of heat provision. The Zehnder ComfoAir 150 can move up to 150 m³/h of air at an external pressure of 100 Pa.
|
|
Features
The FCW fan coil units treats room air during summer (cooling) an winter (heating) seasons.
|
|
<< back to funcoil units
PRISMA
Prisma series well identifies the smooth lines and details that Architects and Designers are more and more pursuing in their projects: actually, the Prisma fan coil units, thanks to their design and to a wide range of colours, shall be easily integrated in every single environment.
They are available in different configurations: installed on the floor, with bottom or frontal air intake (and support feet as optional), as well as ceiling mounted, with rear or bottom air intake.
Prisma casing is manufactured with sheet steel and painted with oven dried epoxy powders; it is available in the wide range of RAL colours, with access doors and grilles in grey thermoresistant ABS. Grilles can be turned in all 4 directions.
|
|
There is something new in the wide and prestigious Eurapo's production: SPHERA, the fan coil designed to satisfy the increasing needs of style and comfort.
Thanks to its shape, to its compact dimensions (depth 190 mm with centrifugal fan) and to its great innovative technical features, SPHERA met a widespread approval from all the market dealers during the official presentation at "Mostra Convegno Expocomfort 2002".
SPHERA can be installed either on the wall or on the floor and is suitable with all the brand new Eurapo's controls: from the traditional ones (mechanical or with microprocessor), to the most innovative ones, which use digital technology in order to be integrated with Building Automation systems.
SPHERA fits into Eurapo's settled experience and reliability, given by its growing and unfailing technical and design research.
This is definitely the most revolutionary way to conceive the fan coil!
|
|
|
The Sabiana Mistral high wall fan coils harmoniously combine the needs of performance, silence, ease of assembly and simplified maintenance, with a range of 4 models, available with multifunction remote control.
|
|
Wolf fan coil units may be installed instead of ordinary radiators, offering considerably increased heating output, rapid warm up, ventilation, cooling and filtering of room air.
The advantages of the KL at a glance:
-7 unit sizes at an air volume of 150-1077 cbm/h
-Heating outputs up to 13,4 kW
-Cooling outputs up to 6 kW
-Optional coil design (ChW / LPHW)
-Applicable for fresh air, mixed air and return air operation
-Suitable for ventilation, heating, cooling and filtering of room air
-Space saving, easy installation
-Universally applicable: For new and old buildings, office and administration buildings, schools, restaurants, hotels, surgeries etc.
-Up to 4 different fan coil units may be operated in parallel via one control unit
|
|
- The MPW are hi-wall Terminal units especially recommeded for rooms in which the floor must remain free or for water distribution systems in false ceilings.
- Very low noise level.
- The units are available with infrared remote controller or wired remote controllers, manual (RAB 30) or automatic (RCC 10 for MPW1/2/3/4B5B and RCC 20 for MPW1BE5B). The infrared remote controller is provided in standard with the unit, the wired remote controllers are available as accessories.
- The active carbon filter, available as accessory, deodorises the ambient. It is added to the standard air filter which retains dust.
- Application fields:
- offices
- meeting rooms
- commercial surfaces.
- Fonctions common to all hi-wall models:
- Cooling or heating by 2-pipe coil.
- Ventilation with integrated filtration.
|
|
| ... products without information |
| |
... see all the products in the category
Fan coils
|
The Paraflex parasol system offers you an unprecedented flexibility in the field of shade creation. Thanks to a parasol on a flexible side pole you can create a maximum of shade. The system offers almost unlimited possibilities, from the ingenious "wall fastening" to the unique "multi-parasol pole fastening".
Wall Flex - 1 Umbrella on the wall
Single Flex - 1 Umbrella on a pole
Duoflex - 2 Umbrellas on a pole
Multiflex - up to 5 ! (4+1) Umbrellas on a pole
Perfect for Personal and Contract Use
Different Umbrella Shapes&Sizes (3) and extended Colourrange (30+)
Ships in 3 weeks
Made in Belgium
|
|
|
The shade can be set based on the position of the sun while the entire surface below the parasol remains free.
|
|
| ... products without information |
| |
The ALYPLANO panels are metallic panels with insulation made of rigid polyurethane foam fit for the realisation of Roofs Coverings of industrial building.
The ALYPLANO panels present good performance of FIRE RESISTANCE.
The ALYPLANO panels are constituted of two trapezoidal or microgrooved metallic supports with interposed insulation of rigid polyurethane foamo.
METAL SUPPORT:
The REPI FIRE panels are made of two trapezoidal, microgrooved or flat metallic supports obtained by cold-process profiling the sheet coils.
The materials which are used are:
- Galvanized Steel
- Prepainted Galvanized Steel
- Natural Aluminium
- Prepainted Aluminium
|
|
|
|
see the results for the following category : 
