Fastening sealants

Designed to provide a watertight seal when used in compression at drain and scupper details, wall terminations, and other details, as specified in the Firestone guidelines.

High-performance, one-component, neutral and elastic filler for sealing and bonding. Composition MS Polymer-based filler. Features and applications Interior and exterior use. Sealing joints and/or cracks. Sealing prefabricated ...

Formulated for high-strength anchorage of threaded rod and rebar into cracked and uncracked concrete and masonry under a wide range of conditions, AT-XP adhesive dispenses easily in cold or warm environments and in below-freezing temperatures ...

Ready-to-use putty paste, easy to apply, offering quick drying and excellent sandability. → Easy to apply → Ready-to-use → Quick drying Application Suitable for levelling and smoothing inside on wood, walls and plasterboard.

Arbosil LM is a one part Neutral Cure Silicone Sealant which cures on exposure to moisture vapour to form an elastic silicone rubber. Arbosil LM - One Part Low Modulus Silicone Sealant Recommended - ...

SUPER – Fix is a one-component adhesive based on MS polymers with a high initial adhesion. The product is odourless and free of isocyanates. Under influence of moisture SUPER – FIX vulcanises to a non-shrink and UV-resistant mass. Suitable ...

Multi-purpose, rapid-hardening sealant and adhesive, suitable for internal and external applications. Particularly suitable for sealing cracks, fixing gripper, door trims, stair nosings and skirting boards. Suitable for ...

MAIN DATA Acetic silicone grouting. Mould-resistant. MAIN FEATURES Highly elastic Good weather and ageing resistance UV resistant All colours have fungicide treatment Optimum workability APPEARANCE Viscous paste in 26 ...

Synthetic rubber-based contact bond sealant in solvent solution with instantaneous setting for assembly and fixing by bonding of the following elements: wood, PVC, fiberboard, paneling, moldings, skirting boards, tiles, ...

ASMACO PU FOAM P-50/P- 65 is a single component, moisture-curing polyurethane foam having low secondary expansion to use for fixing and insulation of door and window frames. It doesn’t contain any propellant gases which are harmful to ...

component joint-sealing material on the basis of silicone rubber which hardens in contact with atmospheric humidity. No discolouration in the contact area, fungicidal properties, tear-fast, neutral cross-linked, emission class A+ (confirmed ...

A durable, fast-curing and elastic adhesive that bonds without primer to most construction materials, including aluminium, galvanized and stainless steel, zinc, copper, natural stone, concrete, brick and cement-based cover sheeting. Key ...

For fastening the SWELLFLEX® bentonite waterstop tape (type CS) or the rubber waterstop tape (type PM) to the concrete surface.

Forms a rubberlike mass with permanently high elasticity (> 900%) after evaporation of the water Can absorb strong expansions and deformations Alkali resistant Very resistant to ageing Waterproof Very good adhesion Easy application For ...

Adhesive formulated by Verea to ensure the fixing of the tiles to their support. The only foam recommended to place the Verea System. Available in gun and cannula and in gray and terracotta.

Description Emülzer® HDM PU 2K is a two component, cold applied, chemically curing, self leveling type, polyurethane based, coal tar modified, elastomeric mastic. It has resistance to jet fuels, oils, diluted acids/bases and various ...

High Adhesive hot melt butyl mastics Bu-tylene Drum 533 is a butyl rubber mastic with fillers and resins. The product is hot melt and can be dispensed from a standard press or from a displacement drum pump. Bu-tylene Drum 533 can be ...

One-component, solvent-free, elastomeric adhesive and sealant. Exceptional adhesion to all building materials, e.g. concrete, brickwork, natural and synthetic stones, steel, aluminium, wood, ceramic tiles, rigid plastic, ...

RHEINZINK seam sealant tape can be used to give seams an additional seal. It is applied to the under-cloak and folded into the seam after the clips have been attached. We recommend using seam sealant ...