Fire resistant gypsum plasterboards

13 companies | 50 products
Plasterboard
  • Characteristics
    Submit
  • Fire behavior
    Submit
  • Ecolabels
    Submit
  • Ecological characteristics
    Submit

These sheathing panels are used as a backup for siding, brick veneer and other similar cladding where fire-resistance ratings...

Designed for the low-cost application of conventional plaster...

SHEETROCK FIRECODE C Core gypsum panels provide improved fire protection over standard FIRECODE panels due to additives that enhance the integrity of the core under fire exposure. Comply with Type...

Cutting-edge design makes these the industry's first lightweight type X fire-resistant sheetrock...

{{productDetail[59672]}}

For interior walls and ceilings in standard residential or commercial applications
Evenwall™ Gypsum Board is an interior gypsum board. Evenwall 5/8" (15.9 mm)Type X has a specially formulated, fire-resistive gypsum...

{{productDetail[59022]}}

The range of GEOFLAM® products allows the assembly of ventilation and smoke extraction ducts with an EI (fire resistant) of 60 to 180. The entire GEOFLAM® range is tested according to EN 1366-1 and 1366-8 (interior sections: 0x0 to 2500x2000 mm).

Our products are...

The range of GEOFLAM® products allows the assembly of ventilation and smoke extraction ducts with an EI (fire resistant) of 60 to 180. The entire GEOFLAM® range is tested according to EN 1366-1 and 1366-8 (interior sections: 0x0 to 2500x2000 mm)
...

{{productDetail[123807]}}

For additional information about tested and standards related to mold and moisture resistance, refer...

DensGlass® Shaftliner is a premium 1" Type X gypsum panel (per ASTM C 1658) backed on both faces with coated fiberglass mat. This architecturally...

ToughRock® Fireguard® and Fireguard C® gypsum boards are Type X (as defined in ASTM...

{{productDetail[61709]}}

Description

Gold Bond® BRAND Fire-Shield C™ Gypsum Board panels have a specially formulated Type X core to achieve superior performance when used in specific fire-rated Type C assemblies.

Long edges of the panels are tapered or square. Tapered edges allow joints to be reinforced with ProForm® BRAND Joint Tape and concealed with ProForm®...

Description

Gold Bond® BRAND High Strength Fire-Shield® LITE® Gypsum Board panels consist of a fire-resistant Type X gypsum core specially formulated to be 15% lighter than standard Type X gypsum board. High Strength Fire-Shield LITE is encased in heavy natural-finish, 100% recycled paper on the face and back sides. The face paper is folded around the long edges to reinforce...

Description

Gold Bond® BRAND High Flex® Gypsum Board panels consist of a fire-resistive gypsum core encased in heavy natural-finish paper on the face side and strong liner paper on the back side. The face paper is folded around the long edges to reinforce and protect the core, and the ends are square-cut...

Description

Gold Bond® BRAND Exterior Soffit Board has a specially treated gypsum core covered on both sides with 100% recycled water-repellent paper formed to the Gold Bond Sta-Smooth edge.

Basic Uses

Exterior Soffit Board is a fire-resistive gypsum panel, designed to provide the extra resistance to moisture and sagging required to meet outdoor...

Description

Gold Bond® BRAND Gypsum Sheathing is a water-resistant panel product designed for attachment to the outside of side-wall framing as a water-resistant underlayment for various exterior siding materials. The sheathing is manufactured with a moisture-resistant core faced with 100% recycled water-repellent paper on both face and back surfaces and on both long edges. Fire-Shield®...

{{productDetail[61718]}}

A board that provides superior fire resistance. It complies with BS1230 Type 5 and BS EN 520 Types D and F. The board is composed...

High strength fire resistant board for use in GTEC Shaftwall systems, steelwork fire encasement. It complies with BS 1230 Types 3, 4 and 5 and BS...

A board that Provides both fire and moisture resistance. It Complies with BS 1230 Types 3, 4 and 5 and BS EN 520 Types D, F and H1. The...

A board that Provides both fire and moisture resistance. It complies with BS 1230 Types 3, 4 and 5 and BS EN 520 Types D, F and H1. The...

Description: Standard plasterboard with 10mm square...

{{productDetail[99644]}}

LightRoc™ gypsum wallboard is lighter in weight than traditional 1/2” drywall. The wallboard panels consist of a fire-resistant gypsum core that...

EAGLEROC® regular gypsum wallboard is the preferred product in the industry due to its consistently high quality standards. The wallboard panels consist of a fire-resistant gypsum core that...

FIREBLOC® Type X gypsum wallboard is the preferred product in the industry due to its consistently high quality standards. The core has been reinforced with the addition...

FIREBLOC® Type C gypsum wallboard is the preferred product in the industry due to its consistently high quality standards. Additional properties enhance the core...

{{productDetail[89108]}}

Description:
AUKO Fire Resistant Gypsum Board consist of gypsum core mixed with glass fiber chopped strands and fire resistant expansion additives, firmly bonded to heavy duty Kraft paper liner on either side, increasing its strength...

{{productDetail[105043]}}

CAPAX is the name of our unique aluminium profile installation system. The Capax system provides a safe and quick installation, well adapted...

{{productDetail[67438]}}

Perlite based instating plaster...

{{productDetail[55543]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With ArchiExpo you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation