- Building & Construction >
- Building material >
- Fixing adhesive mortar
Fixing adhesive mortar
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Capacity in Kg: 10, 20 kg
Rapid Setting Flexible Adhesive • Ceramic & procelain tiles • Use with underfloor heating encapsulated in a levelling compound • Use with plywood overboard (min 15mm) • Ready to grout in 3 hours
MAPEI
Capacity in Kg: 20 kg
High-performance cementitious adhesive with rapid setting, no vertical slip and extended open time for the installation of ceramic and porcelain tiles, porcelain stoneware, natural stones, vitreous and ceramic mosaics ...
... thin-bed mortar based on a hydraulic bonding agent. Ideal for fixing and laying wedi building boards as well as wall and floor tiles in interior as well as external areas. Waterproof and frost-resistant. wedi ...
White or grey adhesive for interior and exterior floors and walls Use AD 8 is used for cementing ceramic tiles, gres, marble etc. onto lime and cement based foundation plasters, long-standing, dry cementitious floor ...
Fassa Bortolo
BI BOND is a two-component filled epoxy adhesive with high thixotropy and the consistency of a soft plaster. Where to use it Waterproof sealing of joints, cracks and construction joints in combination ...
EPOXY POLY-AMINOAMIDE PUTTY, EASY TO USE (A+B). Two component product based on epoxy resins and poly-aminoamide hardeners, easy to be used (the 2 ingredients have to be added in the same concentration in volume). No shrinkages, no leaks. ...
Capacity in Kg: 20 kg
... cementitious mortar for incorporating alkali resistant mesh and forming a render base layer and adhesive bedding coat for weberwall brick. Suitable for: Wall About this product weberwall brick external ...
Weber
Cementitious adhesive made with mixed bonding agents, high flexibility and bonding strength, non slip and extended open time. Suitable for exterior and interior pavements and claddings. Particularly suitable for bonding ...
GRUPO PUMA
SP030 is a totally clear, fast-curing adhesive-sealant for use in the sealing and bonding of glass panes.SP030 is a totally clear flexible seal-adhesive. Ideal for use in the sealing ...
Capacity in Kg: 5, 12 kg
... Gyproc Cove Adhesive is designed for trouble free fixing for all Gyproc Cove and Cornice products. Formulated for great grab and adhesion, it's the professional way to fix Gyproc Cove and Cornice ...
Mineral adhesive with improved adhesion, deformable, no vertical slip, extended open time and excellent workability. Suitable for professional laying of ceramic tiles, mosaics and stable natural stones on walls and floors. ...
COLMEF
MONOTACK®FLEXORAPID is a highly deformable, fast setting, gray, single-component adhesive for ceramic tiles and natural stone with extended open time and limited slip, consisting of cement and silica sand of selected ...
Cement based rapid setting flexible adhesive for interior and exterior use when installing porcelain, ceramic or non moisture sensitive natural stone materials to floors and walls. Adesilex P9 Express is an improved ...
MAPEI GB
MAPEI FRANCE
... deformable, quick-setting, fiber-reinforced, cement-based monocomponent waterproofing and adhesive mortar for tiles. MAIN FEATURES Waterproofer and adhesive in a single product Monocomponent ...
TECHNOKOLLA
Capacity in Kg: 25 kg
... wool in the form of spots at approximately equal distances, at 15-20 cm, and on the edge in a 3-4 cm wide stripe. Adhesive mortar for interior and exterior works for applying mineral wool cushions ...
AdePlast
Capacity in Kg: 5 kg
The adhesive is intended for applying wall and floor tiles with absorbency <0.5% (particularly porcelain gres), both on rigid and on deforming groundworks. Indoor and outdoor use Can be also used for applying other ...
Kreisel
The products of Team Cemento Cerato, have a high technological and environmental content, can be used, as well as in the construction sector, also in other areas of production, such as construction, restoration, furniture, shipbuilding ...
Capacity in Kg: 15 kg
... specific rules or protocols for these applications), it is recommended to replace water with Bisazza latex ULTRA to the Ad Hoc adhesive. Compatible substrates cementitious substrates (reinforced concrete, smooth ...
... of natural oils emulsified in water. The special product composition and the various chemical-physical reactions with the mortar on the casting surface enable the elimination of unaesthetic micro and macro surface blisters ...
sian Paints SmartCare Tile Adhesive for Normal Application is a single component cement based polymer modified adhesive for fixing tiles on floors and walls in interiors as well as exteriors. Asian ...
... formed. The mortar consistency must not be too thin or stick to hands. Do not prepare more mortar than for 15 minutes of work at a time. (It is recommend to use the application technology at a semi-dry ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how ArchiExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining